Connects2
User Manual for Connects2 models including: CAM-FD8, High Level Brake Light Camera Ford Transit Custom
Read the manual prior to installation. Technical knowledge is necessary for installation. Please ensure you use the correct tools to avoid damage to the vehicle or product.
CEL STORES | C2 CAM FD8
File Info : application/pdf, 2 Pages, 796.80KB
DocumentDocumentUser Manual CAM-FD8 High Level Brake Light/Camera Ford Transit Custom (V362) 2012-2016 PRODUCT FEATURES: Image Sensor: 1/3" CCD TV Lines: 700 TV System: PAL Viewing Angle: 120 Degrees Waterproof Rating: IP69K Image: Mirror Infra-Red LED's: Yes Enhanced Performance In Low Light: Yes Operating Temperature: -40 Degrees C to +80 Degrees C Current Consumption: 45-141mA @ 13.8V Operating Voltage: 12V DC (Negative Ground) DISCLAIMER: Prior to Installation Read the manual prior to installation. Technical knowledge is necessary for installation. Please ensure you use the correct tools to avoid damage to the vehicle or product. Connects2 can not be held responsible for the installation of this product. Technical Support Connects2 want to provide a fast and suitable resolution should you encounter any technical issues. With this in mind, when contacting Connects2, try to provide as much Information as possible. This will speed up the process and help us to help you. Please use our dedicated online technical support centre: support.connects2.com CONTENTS Connects2Vision - Camera with 35cm cable to Male 4-pin camera connector - Instructions *Note: CAM-RCA1 extension cable is required for installation. (sold separately) INSTALLATION 1. Remove the third brake light from the vehicle and unplug the connection cable. 2. Connect the CAM-FD8 to the connection cable and refit to the vehicle taking care not to trap any cables. 3. Connect the Black wire to a suitable ground and connect the Red wire to the reversing light circuit or an interface which provides a reverse signal. 4. Connect the camera to the 4-pin extension cable, connect the extension cable to the CAM-RCA1 and connect the Yellow RCA Male connector to the display screen and ensure that the image is displayed correctly. Subscribe to our YouTube Channel for installation guides and tips... www.youtube.com/connects2 2 www.connects2.com