MEAN WELL Switching Power Supply ManufacturerProduct Liability Disclaimer-MEAN WELL Switching Power Supply ManufacturerGlobal Trade Item Number (GTIN)-MEAN WELL Switching Power Supply Manufacturer
Owner's Manual for MEAN WELL models including: HRP-600-3.3, HRP-600-5, HRP-600-7.5, HRP-600-12, HRP-600-15, HRP-600-24, HRP-600-36, HRP-600-48, HRP-600 Series 600W Single Output with PFC Function, HRP-600 Series, HRP-600 Series Single Output with PFC Function, 600W Single Output with PFC Function, 600W Single Output, Single Output with PFC Function, Single Output PFC Function, PFC Function, PFC
MeanWell HRP-600-5 (600W/5V) Schaltnetzteil / AC/DC-Netzteilbaustein – Netzteilshop24.de Weitere Informationen entnehmen Sie bitte hier dem
MeanWell HRP-600-24 (648W/24V) Schaltnetzteil / AC/DC-Netzteilbaustein – Netzteilshop24.de
File Info : application/pdf, 2 Pages, 150.78KB
DocumentDocument600W Single Output with PFC Function HRP-600 series User's Manual SPECIFICATION UL62368-1 Bauar t gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 BS EN/EN62368-1 TPTC004 IEC62368-1 MODEL HRP-600-3.3 HRP-600-5 HRP-600-7.5 HRP-600-12 HRP-600-15 HRP-600-24 HRP-600-36 HRP-600-48 OUTPUT DC VOLTAGE 3.3V 5V RATED CURRENT 120A 120A CURRENT RANGE 0 ~ 120A 0 ~ 120A RATED POWER 396W 600W RIPPLE & NOISE (max.) Note.2 120mVp-p 150mVp-p VOLTAGE ADJ. RANGE 2.8 ~ 3.8V 4.3 ~ 5.8V VOLTAGE TOLERANCE Note.3 ±2.0% ±2.0% LINE REGULATION ±0.5% ±0.5% LOAD REGULATION ±1.0% ±1.0% SETUP, RISE TIME 1800ms, 50ms/230VAC 7.5V 12V 15V 80A 53A 43A 0 ~ 80A 0 ~ 53A 0 ~ 43A 600W 636W 645W 150mVp-p 150mVp-p 150mVp-p 6.8 ~ 9V ±2.0% 10.2 ~ 13.8V 13.5 ~ 18V ±1.0% ±1.0% ±0.5% ±0.3% ±0.3% ±1.0% ±0.5% ±0.5% 3600ms, 50ms/115VAC at full load 24V 27A 0 ~ 27A 648W 150mVp-p 21.6 ~ 28.8V ±1.0% ±0.2% ±0.5% 36V 17.5A 0 ~ 17.5A 630W 200mVp-p 28.8 ~ 39.6V ±1.0% ±0.2% ±0.5% 48V 13A 0 ~ 13A 624W 240mVp-p 40.8 ~ 55.2V ±1.0% ±0.2% ±0.5% HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.5 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.93/230VAC PF>0.99/115VAC at full load INPUT EFFICIENCY (Typ.) 78.5% 82% 86% 88% 88% 88% 89% 89% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 7.6A/115VAC 3.6A/230VAC 35A/115VAC 70A/230VAC LEAKAGE CURRENT <1.2mA / 240VAC OVERLOAD 105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE 3.96 ~ 4.62V 6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V Protection type : Shut down o/p voltage, re-power on to recover 41.4 ~ 48.6V OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down FUNCTION DC OK SIGNAL FAN CONTROL (Typ.) WORKING TEMP. PSU turn on : 3.3 ~ 5.6V ; PSU turn off : 0 ~ 1V Load 35±15% or RTH250 Fan on -40 ~ +70 (Refer to "Derating Curve") WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH non-condensing TEMP. COEFFICIENT ±0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL62368-1, TUV BS EN/EN62368-1, AS/NZS62368.1, EAC TP TC 004 approved SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE (Note 4) EMC EMISSION I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 57.6 ~ 67.2V EMC IMMUNITY MTBF Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, BS EN/EN61000-6-2, heavy industry level, EAC TP TC 020 1333.6K hrs min. Telcordia SR-332 (Bellcore) ; 140.7K hrs min. MIL-HDBK-217F (25) OTHERS NOTE DIMENSION 218*105*63.5mm (L*W*H) PACKING 1.5Kg;8pcs/13Kg/1.34CUFT http://www.meanwell.com) https://www.meanwell.com/serviceDisclaimer.aspx File Name:HRP-600-SPEC 2022-08-08 600W Single Output with PFC Function Mechanical Specification 152.4 20.75 10 8.2 Air flow direction I/P 1 2 3 12max. 63.5 4-M4 L=6 218 152.4 8-M4 L=4 (Both Sides) HRP-600 series 32.8 O/P 1 2 3 4 5 6 9.2 11 Case No. 977A Unit:mm 12 34 105 CN100 LED SVR1 (Vo ADJ.) 32.8 18max. 12.5 38.3 63.5 AC Input Terminal Pin No. Assignment Pin No. Assignment 1 AC/L 2 AC/N 3 FG Block Diagram I/P EMI FILTER FG Derating Curve DC Output Terminal Pin No. Assignment Pin No. Assignment 1~3 -V 4~6 +V Connector Pin No. Assignment(CN100) : HRS DF11-4DP-2DS or equivalent Pin No. Assignment Mating Housing Terminal 1 DC-OK 2 GND HRS DF11-4DS HRS DF11-**SC 3 +S or equivalent or equivalent 4 -S ACTIVE INRUSH CURRENT LIMITING RECTIFIERS & PFC O.T.P. PFC CONTROL POWER SWITCHING O.L.P. PWM CONTROL RECTIFIERS & FILTER DETECTION CIRCUIT O.T.P. O.V.P. PWM fosc : 70KHz +S +V -V -S DC OK Output Derating VS Input Voltage LOAD (%) LOAD(%) 125 100 100 90 80 80 70 50 60 50 20 40 -40 0 10 20 30 40 50 60 70 (HORIZONTAL) 85 100 125 135 155 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (V) 60Hz File Name:HRP-600-SPEC 2022-08-08