Installation Guide for HONDA models including: GL1800-D-DA, GL1800B-BD, GL1800-D-DA Upper Air Deflector, Upper Air Deflector, Air Deflector, Deflector
Upper Air Deflector for 2018 Gold Wing
4'HONDA Accessory Application INSTALLATION INSTRUCTIONS UPPER AIR DEFLECTOR P/N 08R72-MKC-A01 GL1800/D/DA GL1800B/BD Honda Dealer: Please give a copy of these instructions to your customer. Publication No. MII 16426 Issue Date January 2018 PARTS LIST (11) (10) TORQUE CHART Tighten all screws, bolts, and nuts to their specified torque values. Refer to the Service Manual for the torque values of the removed parts. (13) (15) (14) 5 mm screw Special nut Item N·m kgf·m Ibf·ft 5.2 0.5 3.8 5.2 0.5 3.8 (2) INSTALLATION (12) (1) 1. Fold down the left rear view mirror backward as shown. (9) (3) (6) <Left side> (7) (8) (4) (5) No. Description (1) Installation instructions URL (2) Air deflector A (3) Air deflector bracket A (4) Right air deflector bracket B (5) Left air deflector bracket B (6) Damper (7) Pin (8) E-ring (9) Plug (10) 5 mm screw (long) (11) 5 mm screw (short) (12) Special nut (13) Washer (14) Rubber washer (15) Collar Qty 1 2 2 1 1 2 LEFT REAR 2 VIEW MIRROR 2 2 4 2. Attach masking tape as shown. 4 4 4 4 4 TOOLS AND SUPPLIES REQUIRED Hex wrench (5 mm) Flat-tip screwdriver Long nose pliers Electric drill Drill bit (5 mm) File Masking tape Torque wrench © 2018 American Honda Motor Co., Inc. - All Rights Reserved. 1 of 3 MASKING TAPE 87968-MKC-A010.indd 3. Remove the left mirror arm panel as shown. <Left side> LEFT MIRROR ARM PANEL SCREW 5. Install the left mirror arm panel in the reverse order of removal. 6. Install the air deflector A as shown. LEFT AIR DEFLECTOR BRACKET B SPECIAL NUT RUBBER WASHER 4. Drill at the marked lines of the left mirror arm panel as shown. · Remove any burrs from the edge of the hole. LEFT MIRROR ARM PANEL (Inner side) WASHER 5 mm SCREW (short) AIR DEFLECTOR A MARKED LINE After cutting, finish with a file as shown. MARKED LINE MARKED LINE ELECTRIC DRILL (5 mm BIT) -FILE File off the cutout surface. 2 of 3 7. Install the air deflector bracket A as shown. Align the groove of air deflector bracket A and left air deflector bracket B, and insert the damper. AIR DEFLECTOR BRACKET A 9. Install the collars as shown. COLLAR AIR DEFLECTOR BRACKET A Align with the groove. LEFT AIR DEFLECTOR BRACKET B PLUG DAMPER AIR DEFLECTOR BRACKET A 10. Install the assembled left air deflector A as shown. <Left side> I -\_ ~ --...,.,I__\\1;1"'"-- ~ 8. Install the pin as shown. PIN AIR DEFLECTOR BRACKET A 5 mm SCREW (long) E-RING ASSEMBLED LEFT AIR DEFLECTOR A 11. Remove the masking tape. 12. Return the left rear view mirror to its original position. 13. Install the right side in the same manner as the left side. 3 of 3Acrobat Pro 23 Paper Capture Plug-in