Volkswagen / Seat / Skoda Steering Wheel Control Interface Installation Kit
Model: Volkswagen:
- Caddy, Golf 5 (Type 1K), Jetta (Type 1K5), Passat (Type C), Polo (9N3), Touran 2005 >
- Eos, Golf Plus, 2006 >
- Tiguan 2007 >
- Golf 6, Passat CC, Scirocco 3 2008 >
- Polo 2009 >
SEAT:
- Ibiza 2008 >
- Altea, Altea XL, Leon, Toledo 2009>
SKODA:
- Superb (Type 3T) 2008>
- Octavia 2009>
Kit content: Antenna adapter, SWC CANBUS interface, Wiring harness
Customer code: CTSVW002PAE
Wiring Diagram
The wiring harness consists of the following components:
- 1: To CAR CONNECTOR
- 2: To ISO connectors (Black and red housing)
- 3: To Remote out
- 4: Service provided wires:
- 4a: Violet / White – Reverse
- 4b: Pink - Speed pulse
- 4c: Green - Park brake
- 5: SWC - To WIRED REMOTE SOCKET (NOTE: do not connect to microphone socket)
- 6: AERIAL ADAPTER DOUBLE OEM ANTENNA BULK:
- 6a: MALE REMOTE OUT - TO OUT ANTENNA
- 6b: JACK DIN - TO RADIO ANTENNA CONNECTOR
- 6c: To CAR ANTENNA CONNECTOR
Important Notes
ATTENTION! In order to prevent ESD damage, the WHEEL REMOTE JACK must be connected before plugging in the connectors on car side.
Connect “Remote out” (wire n° 3) to “Male remote out - To out antenna” (wire n° 6a) if antenna power is required.
Technical Specifications
V battery | Output voltage |
---|---|
Min. 9 Vdc | V battery – 0.2 V at 0.5 A |
Max. 16 Vdc | V battery - 1.0 V at 2.0 A |
Configuration
Steering button configuration:
An example of a possible steering button configuration:
The steering wheel buttons perform the following functions (if supported by the radio):
- 1: Volume +
- 2: Volume -
- 3: Seek +
- 4: Seek -
- 5: Phone
- 6: Mute / Voice
All installation work must be performed by a qualified professional installer only. The manufacturer / dealer is not liable for any kind of incidental or indirect damages. 06/2024 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.