Instruction Manual for COLORKINETICS models including: Blast Powercore gen5 RGBA, Blast Powercore, Powercore, Powercore gen5 RGBA
2022-08-05 — Blast Powercore gen5, RGBA high-performance LED luminaires combine white and rich, saturated, color and color-changing effects with simplified installation.
File Info : application/pdf, 4 Pages, 715.10KB
DocumentDocumentBlast Powercore gen5, RGBA Exterior versatile and customizable luminaire with intelligent RGBA light Blast Powercore gen5, RGBA high-performance LED luminaires combine white and rich, saturated, color and color-changing effects with simplified installation. Blast Powercore gen5 offers a range of accessories that allow customizable beam angles for floodlighting, spotlighting, wall washing, and grazing, along with the efficiency and cost-effectiveness of Powercore technology in a rugged die-cast aluminium housing. Date: Type: Firm Name: Project: 100 277 VAC, 60° Spread Lens, Black Housing, UL/CE/CQC · Expands customization with a wide range of new accessory options. In addition to the native 10° lens, five different spread lenses can customize the luminaire to produce 20°, 40°, 60°, 80°, and 10° x 40° (asymmetric) beam angles. Three housing color choices (black, gray, and white) plus the option to add or combine a louver, rock guard, full glare shield, and half glare shield create new aesthetic possibilities for designers and architects. · Improves color consistency between all LED luminaires in a family with Chromasync technology. During the manufacturing process a calibrated light measurement device creates an algorithm to define a common color gamut for an entire family of LED luminaires. When Chromasync is enabled, color consistency between luminaires is achieved without having to manually adjust color points on each luminaire. · Meets ASTM B117 standard for > 1,500 hours of corrosion resistance and ANSI C136.31-2010 standard with a 3G vibration rating. · Features an innovative, redesigned optical system that improves the quality of light from each LED, enhancing the color uniformity and color mixing capabilities of each Blast Powercore gen5 luminaire. · Improves durability with new flat lens that prevents water from pooling into the luminaire, keeping the LEDs protected and secure over the course of a luminaire's lifetime. · Integrates patented Powercore technology that controls power output to luminaires directly from line voltage rapidly, efficiently, and accurately. The Color Kinetics Data Enabler Pro merges line voltage with control data and delivers them to luminaires over a single standard cable, dramatically simplifying installation and lowering total system cost. · Universal power input range of 100 to 277 VAC. · Works seamlessly with the complete Color Kinetics line of controllers, including ColorDial Pro, iPlayer 3, and Light System Manager as well as third-party controllers. For detailed product information, please refer to the Blast Product Guide at https://www.colorkinetics.com/global/products/rgb/blast-powercoregen5-rgba Blast_Powercore_gen5_RGBA_100-277VAC_60deg_BlackHousing_UL Specifications Due to continuous improvements and innovations, specifications may change without notice. Output Physical Beam Angle Lumens Efficacy (lm/W) LED Channels 60° 1,788 38.4 Red/Green/Blue/Amber Electrical Input Voltage 100 to 277 VAC, auto-ranging, 50/60 Hz Power Consumption 46.4 W (Maximum at full output, steady state) Power Factor 0.99 @ 120 VAC Surge Limits ¶ 0.91 @ 277 VAC 2 kV maximum differential (L to N) 4 kV maximum common (L to Gnd or N to Gnd) For additional Surge Protection Requirements for LED Lighting Systems, please refer to www.colorkinetics.com/KB/surge-protection. Control Interface Data Enabler Pro (DMX/Ethernet) Control System Color Kinetics full range of controllers, including Light System Manager, Video System Manager Pro, iPlayer 3, Antumbra iColor Keypad, and ColorDial Pro, or third-party controllers Remote Monitoring & Management Works with Interact Landmark Lumen Maintenance Dimensions (Height x Width x Depth) Weight Effective Projected Area (EPA) Housing Material Lens Luminaire Connections 183.7 x 337.8 x 171.2 mm (7.2 x 13.2 x 6.74 in) 3.9 kg (8.2 lb) 0.068 m² (0.73 ft²) (Luminaire plus Full Glare Shield) Die-cast aluminium, black powder-coated finish Clear tempered glass 1.8 m (6 ft) unified power/data cable Temperature Ranges -40 to 50 °C (-40 to 122 °F) Operating -20 to 50 °C (-4 to 122 °F) Startup -40 to 80 °C (-40 to 176 °F) Storage Vibration Resistance Complies with ANSI C136.31, 3G Mechanical Impact IK10 Corrosion Resistance Complies with ASTM B117 standard for > 1,500 hours Humidity 0 to 95%, non-condensing Thermal Protection enabled For additional Thermal Protection information, please refer to https://colorkinetics.helpdocs.io/article/sh301ducix Luminaire Run Lengths To calculate luminaire run lengths and total power consumption for your specific installation, download the Configuration Calculator from www.colorkinetics.com/support/install_tool/ Threshold§ L 90 L 80 L 70 L 50 Ambient Temperature 25 °C 50 °C 25 °C 50 °C 25 °C 50 °C 25 °C 50 °C Reported ¶¶ >39,715 >39,715 >60,000 >60,000 >60,000 >60,000 - Calculated ¶¶ >39,715 >39,715 >98,607 >98,607 >100,000 >100,000 >100,000 >100,000 Certification and Safety Approbation UL/cUL, FCC Class A, CE, PSE, CQC, RCM Environment Dry/Damp/Wet Location, IP66 For additional Energy Efficiency Class Information, please refer to https://colorkinetics.helpdocs.io/article/cviis2p8qq. Native beam lumen output measurements comply with IES LM-79-08 testing procedures. All other beam angle measurements are estimated based on the native beam measurements. § Lxx = xx% lumen maintenance (when light output drops below xx% of initial output). All values are given at B10, or the median value where 90% of the LED population is better than the reported or calculated lumen maintenance measurement. ¶ Minimum surge limits per IEC 61547, tested in accordance with IEC 61000-4-5. When mounting to a junction box, the Color Kinetics wiring compartment accessory must be used to maintain a 3G vibration rating. ¶¶ Lumen maintenance figures are based on lifetime prediction graphs supplied by LED source manufacturers. Whenever possible, figures use measurements that comply with IES LM-80-08 testing procedures. In accordance with TM-21-11, Reported values represent the interpolated value based on six times the LM-80-08 total test duration (in hours). Calculated values represent time durations that exceed six times the total test duration. 2 Blast Powercore gen5, RGBA, 100 277 VAC, 60° Spread Lens, Black Housing, UL/CE/CQC Specification Sheet Dimensions Photometrics 60° frosted lens Photometric data is based on test results from an independent NIST traceable testing lab. IES data is available at www.colorkinetics.com/global/support/ies. Beam Angle LED Lumens Efficacy (lm/W) 60° RGBA 1,788.0 38.4 Blast Powercore gen5, RGBA, 100 277 VAC, 60° Spread Lens, Black Housing, UL/CE/CQC Specification Sheet 3 Luminaire and Accessories Use Item Number when ordering in North America Luminaire Blast Powercore gen5, RGBA, 100 277 VAC, Black Housing, UL/CE/CQC Luminaire only. Values in this specification sheet represent both the luminaire and spread lens combined. Spread lens available below in Associated Part. Associated Part 60° Spread lens Trim Ring required for mounting. Must be ordered separately. Accessories Trim Ring, Black Louver, Black Rock Guard, Black Half Glare Shield, Black Full Glare Shield, Black Wiring Compartment UL/cUL, Black Wiring Compartment CE, Black Architectural Mounting Arm, for use with Blast, Graze, Graze Compact, Burst Architectural, and Vaya Flood. Short, gray Architectural Mounting Arm, for use with Blast, Graze, Graze Compact, Burst Architectural, and Vaya Flood. Medium, gray Architectural Mounting Arm, for use with Blast, Graze, Graze Compact, Burst Architectural, and Vaya Flood. Long, gray Power Supplies Data Enabler Pro, 3/4 in / 1/2 in NPT (U.S. trade size conduit) Data Enabler Pro, PG21/PG13 (metric size conduit) Item Number Item 12NC 423-000028-01 912400137702 120-000185-10 912400130346 120-000185-01 120-000185-05 120-000185-07 120-000185-14 120-000185-03 106-000011-30 106-000011-40 120-000206-00 120-000206-01 120-000206-02 912400130337 912400130341 912400130343 912400130350 912400130339 910503704147 910503703275 912400136642 912400136643 912400136644 106-000004-00 910503701210 106-000004-01 910503701211 © 2022 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. 08/05/2022 Color Kinetics https://www.colorkinetics.com/global/products/rgb/blast-powercore-gen5-rgba
IES Files | Color Kinetics
Color Kinetics Energy Label information - Knowledgebase