1. Caution
Please consult your doctor before starting any exercise and diet plan. The smartwatch can monitor your heart rate, but testing data cannot be used for any medical purpose.
2. Device Compatibility
Supports Android 5.0 and above, iOS 9.0 and above.
3. Charging
Please use the proper USB cable for charging. If the device is not used for a long time, please remember to recharge it at least once a month.
- Please attach the magnetic charging cable to the pogo pins; the magnets will automatically align with the positive and negative poles for charging.
- Please ensure that the charging contacts are free of dirt and impurities. If present, wipe them clean, otherwise, charging will not occur.
- Use a 5V 500mA adapter and charge for 2-3 hours for a full charge.
4. Connecting Smartwatch to Mobile Phone
4.1 Power On
Charge the device or press and hold the side button for 3 seconds to power on.
4.2 Install APP
Scan the QR code with your mobile phone, or search for and install the "Da Fit" APP from the Apple App Store, Google Play Store, or App Store.
4.3 Bluetooth Call Connection
4.3.1 For Android phones: After the watch is successfully bound to the APP, a prompt will appear asking to pair with "D01". Please pair directly.
4.3.2 For iOS phones and some Android phones: After the watch is successfully bound to the APP, when using the phone function, you need to manually go to your phone's settings, Bluetooth, search for "D01", and click to pair. Pairing must be successful for the phone function to work normally.
4.3.3 Warm Reminder
- To ensure a better user experience, please upgrade the APP to the latest version.
- The system requires Android 5.0 or above, and iOS 9.0 or above.
- Upon the first connection to the APP on an iOS system, a Bluetooth pairing request will appear. Click "Pair" to connect. The watch can then synchronize and receive notifications for calls, SMS, and other app alerts from iOS.
- For Android devices, upon the first connection to the APP, a prompt for app permission activation will appear. Please follow the prompts to activate permissions, as failure to do so may result in unstable connections or disconnections.
- During the pairing process, please ensure your phone's network connection is normal, GPS positioning is enabled, and Bluetooth is turned on to guarantee a stable connection between the watch and the phone.
- If the device cannot be found during the adding process, or if the device cannot be connected during use, try long-pressing the watch's side button for 5 seconds to power off, then power on again, or select "Restore Factory Settings" in the watch's system interface, and then re-add the device.
4.4 Unbind
Unbind from Android device: In the app's device settings, click "Unbind" to disconnect the smartwatch from the app.
Unbind from iOS device: To completely unbind the smartwatch connection from an Apple device: In the app, go to the device settings and click "Unbind". Then, go to your phone's Settings > Bluetooth, tap the "i" icon next to the Bluetooth device named "Smart Watch", and select "Ignore This Device" in the pop-up dialog to completely remove the connection.
5. Precautions
- Smartwatch theoretically supports iOS 9.0 and Android 5.0 versions and above, with Bluetooth 4.0 devices. However, compatibility is not guaranteed for all mobile device models; please refer to actual usage.
- This device uses 5V 500mA for charging. It is strictly prohibited to use over-voltage power supplies, as this may cause hardware damage.
- The smartwatch has a built-in battery that cannot be removed. Please do not attempt to replace the battery yourself.
- The operating environment for the smartwatch is 0°C to 45°C. Charging temperature is 0°C to 45°C.
- Please be mindful when wearing. If you have sensitive skin or wear the smartwatch too tightly, you may experience discomfort.
- If the smartwatch gets wet, please wipe it dry before charging, otherwise, it may cause malfunctions or corrosion of the charging contact points.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.