ClonerAlliance HDML-Cloner Box User Manual

Introduction

This documentation describes how to use the HDML-Cloner Box (Model: CA-988B) device.

Copyright Notice

Copyright © ClonerAlliance® Inc. All rights reserved.

Documentation Version 2.1

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of ClonerAlliance™ Inc.

Trademarks

HDML® is a registered trademark of ClonerAlliance® Inc.

Safety Notices

Before using HDML-Cloner Box, please ensure that you read and understand the safety precautions below:

1. Do not attempt to open the case of HDML-Cloner Box or modify it in any way, as this will void the warranty.
2. Keep HDML-Cloner Box away from water and other liquids, as this may cause the unit to malfunction.
3. HDML-Cloner Box may become warm during use. This does not indicate malfunction.
4. Do not place heavy objects on HDML-Cloner Box, as this may cause the unit to overheat and malfunction.
5. If the exterior of HDML-Cloner Box requires cleaning, wipe it with a soft dry cloth.
6. Do not dispose of the unit via conventional domestic waste.

Product Diagram

Device Ports and Buttons:

• 1. ON/OFF: Press and hold this button for about 5 seconds to turn the power on or off.
• 2. 5V/2A: Plug the power adapter into this socket to power on the HDML-Cloner Box.
• 3. IN: Connect an HDMI cable between the source video player and the HDML-Cloner Box.
• 4. OUT: Connect an HDMI cable between the HDML-Cloner Box and the TV.
• 5. Storage: Insert a USB flash drive or mobile hard disk here to record videos to this storage medium.
• 6. REC/STOP and 1080p/720p: Press this button to start or stop recording. Pressing and holding this button for a few seconds switches between 720p and 1080p resolution.
• 7. MIC: Insert the microphone plug into this jack to input voice.

Connection Guides

2.1 Xbox 360 and Xbox One

1. Plug the power adapter into the power socket and connect the other end into the 5V/2A port of HDML-Cloner Box.
2. Connect Xbox 360/Xbox One to HDMI IN on HDML-Cloner Box via an HDMI cable.
3. Connect HDML-Cloner Box from HDMI OUT to TV via an HDMI cable.
4. Connect the HDD or USB stick to the USB port of HDML-Cloner Box.

2.2 Nintendo Wii

1. Plug the power adapter into the power socket and connect the other end into the 5V/2A port of HDML-Cloner Box.
2. Connect Wii to HDMI IN on HDML-Cloner Box via an HDMI cable.
3. Connect HDML-Cloner Box from HDMI OUT to TV via an HDMI cable.
4. Connect the HDD or USB stick to the USB port of HDML-Cloner Box.

2.3 Set-top box/HD video output devices

Your HDML-Cloner Box can capture any video from any video source/device and all you need is the right ports/connections!

1. Plug the power adapter into the power socket and plug the other end into the 5V/2A port of HDML-Cloner Box.
2. Connect the set-top box, DVD/Blu-ray player, PC or any other device to HDMI IN on HDML-Cloner Box via an HDMI cable.
3. Connect HDML-Cloner Box from HDMI OUT to TV via an HDMI cable.
4. Connect the HDD or USB stick to the USB port of HDML-Cloner Box.

How to Record/Capture

1. Switch On Power. The LED light will illuminate solid Blue or Green.
2. Prior to gameplay or video playback, press the REC/STOP button. Start playing game or video, then recording will start simultaneously. The LED light will blink Blue or Green.
3. When gameplay or video playback is completed, press the REC/STOP button again to stop recording.
4. The LED light will blink blue/green alternately several times. DO NOT remove the USB device as the file is being saved. The LED light will turn Blue or Green after the file is saved.

LED Status Indicators:

The LED light of HDML-Cloner Box will illuminate different colors/ways to indicate functions.

Tips

1. When the storage space of the USB flash drive or mobile hard disk is full, HDML-Cloner Box will stop recording.
2. If you press and hold the REC/STOP button for a few seconds, it will work as a switch between 720p and 1080p.

Note: You can switch between 720p and 1080p only with the input resolution of 1080p/1080i.

USB Storage Requirements:

Please use a mobile hard disk or USB flash drive with a storage capacity of 2TB or less in NTFS or FAT32 format. Please make sure the disk boot format is MBR.

Supported Resolutions

Product Specifications

Microphone Function

For best quality voice recording, please use a good quality microphone.

To control voice recording, please adjust the volume of the HDMI input source.

Fig. 1: Note. Please use a microphone with a plug like this.

Frequently Asked Questions

Please refer to http://www.cloner-alliance.com/faq.html for frequently asked questions.

Contact Us

If you encounter any problem when using ClonerAlliance products, please contact ClonerAlliance by email at support@cloner-alliance.com or call 1-844-9-CLONER (toll free). ClonerAlliance will serve you with utmost satisfaction.

ClonerAlliance offers a satisfying discount on batch purchases and an affiliate program. If you are interested, please contact ClonerAlliance by email at market@cloner-alliance.com.

Website: www.cloner-alliance.com

Copyright ClonerAlliance Inc. All rights reserved.

Disclaimer

HDMI is a registered trademark of HDMI Licensing, LLC. USB is a registered trademark of USB Implementers Forum. HDMI and USB are registered trademarks of their respective companies. ClonerAlliance Inc. is not affiliated with those companies.