User Manual for Pinneng models including: H2R, 2BAB3-H2R, 2BAB3H2R, H2R Helmet Speaker, Helmet Speaker, Speaker
Huizhou Pinneng New Energy Co., LTD H2R 2BAB3-H2R 2BAB3H2R h2r
Type-C 1 2 "" BT 123 21 3BT"H2R" 452 1033 5 5 USB TypeCUSB 2 1 2 3 42 X1 X1 X1 X1 12 2 3 2 1 2 10 580% BT5.2 10 400 2 *BT 2 1-10-45 14-113/ 2 3 4 5 6 H2R 1 2 A B C 3 4 HELMET SPEAKER Manual Status indicator Speaker bracket Assembly steps Multi function knob button Type-C Charging port BT Pairing steps 1. Press and hold the multifunction button for 2 seconds, the blue light flashes 3 times, and the speaker starts; 2. When pairing, control the distance between the speaker and the mobile phone within 1m; 3. Find "H2R" on the BT search interface of the mobile phone, and select it to complete Bluetooth pairing; 4. Green flashes twice every 5 seconds after pairing. Note: When the distance between the speaker and the mobile phone exceeds the eff ective distance (10 meters or 33 feet), the green light will always be on, and the speaker will be disconnected. It will enter the range within 5 minutes, automatically connect and play. The speaker will shut down Charging mode automatically after 5 minutes without connection. Helmet Speaker Speaker bracket 1. Select a suitable place to place the speaker, remove the sticker on the speaker bracket, and thenThe bracket is pasted on the helmet and pressed tightly. 2. Put the speaker into the bracket, press the speaker and turn it clockwise to hear A slight "click" indicates that tNhoete: In order to avoid the invasion of rain and sdpuesatk,er has been connected to the bracket. please turn the charging port downward. Connect the speaker and USB with a standard USB TypeC charging cable (one is included with the package) Connect the charger to charge. It can be fully charged in about 2 hours. The red light is always on when charging, and the blue light is always on after fully charging. Note: 1. As the battery may lose power during storage, it is recommended to charge the headset before the first use. 2. Please use the speaker carefully during charging. 3. If it is not used for a long time, it is recommended to charge it in turn every month to maintain the battery life. 4. The red light flashes once every 2 seconds: the battery is low, please chParagce.kaging accessories Speaker X1 Cable X1 Microphone X1 Manual X1 Play function 1. Press and hold the multifunction key for 2 seconds to start the machine (press and hold to turn it off after starting the machine); 2. When playing music, click the multifunction key to pause, and then click to play music again; 3. When a call comes in, click the multifunction key to answer the call. During a call, click the multifunction key to interrupt the call, and double-click the multifunction key to end the call; When there is a call, long press the multifunction key for 2 seconds to reject the call; When connected, double click the multifunction key to replay the last call. 1. When playing, turn the keyboard to the right (clockwise) once to release it and play the next song; Rotate it to the right (clockwise) and do not loosen it to increase the volume; 2. When playing, turn the keyboard to the left (counterclockwise) to release it and play the previous song; Turn it to the left (counterclockwise) and do not release it to reduce the volume. Parameter Speaker type: bone conduction technology speaker Standby time: up to 10 days Playback time: up to 5 hours (80% volume) BT version: 5.2 Eff ective distance: 10m Battery capacity: 400mA Charging time: 2 hours *For diff erent types of BT devices, diff erent operating systems or music players, the above functions may be diff erent. Fault diagnosis and solutions Question Cause of failure Solutions Unable to start Check whether the battery is fully charged Charge the battery Cannot connect Double click the Speaker enters standby mode multifunction key Long press the Unable to pair Did not enter pairing mode multifunction key for 2 seconds Warranty Product brand: Product model: H2R User Name: Date of purchase: contact number: Contact address: mail box: Purchase channel: Storage and maintenance 1. Please store the speaker in a cool, dry place. Operating temperature: - 10-45 (14-113 ). Working in a cold/hot environment or a highly humid place will reduce the battery life. 2. Please charge the speaker before using it after it has been left unused for a long time. 3. Please do not put the speaker into water. After using the speaker in rainy days, please use a clean soft cloth to clean it. 4. Do not use any sharp objects to release the speaker. 5. Do not place the headset at extremely high or low temperatures. 6. Do not charge the speaker in a damp environment.Microsoft Word 2016 Microsoft Word 2016