Hansgrohe Shower System: Safety, Installation, and Technical Guide
Product Overview
This document provides essential safety instructions, technical data, installation guidelines, and spare parts information for Hansgrohe shower systems, including models like Unica's Puro and Raindance S series.
Safety Instructions ⚠️
- Always wear gloves during installation to prevent crushing and cutting injuries.
- Children and adults with physical, mental, or sensory impairments must not use the shower system without supervision.
- Individuals under the influence of alcohol or drugs are prohibited from using the shower system.
- Avoid direct contact of the shower spray with sensitive body parts, such as eyes. Maintain adequate distance between the shower and the body.
- The product is not designed to be used as a grab handle; a separate handle must be installed if needed.
- The shower system is intended solely for bathing, hygiene, and body cleansing purposes.
- Shower hoses are only suitable for connecting showers to fittings. Do not install any shut-off device between the fitting and the hose.
Technical Data ⚙️
- Operating Pressure: Max. 0.6 MPa
- Recommended Operating Pressure: 0.1 - 0.4 MPa (1 MPa = 10 bar = 147 PSI)
- Hot Water Temperature: Max. 60°C
Symbol Descriptions ?
- Silicone: Do not use silicone containing acetic acid! ?
- Dimensions: Refer to pages 31-34 for detailed measurements. ?
- Flow Diagram: Refer to page 33 for flow rate information at different pressures. ?
- Operation: Refer to page 36 for usage instructions. ?️
- Cleaning: Refer to page 37 and the enclosed brochure for cleaning instructions. ?
- Spare Parts: Refer to page 38 for a list of spare parts and color codes (XXX = Colors, 000 = Chrome, 820 = Brushed Nickel, 880 = Satin Chrome).
- Test Certificate/Approval: Refer to page 39 for quality marks and certifications. ✅
Installation Instructions ?️
- Fittings must be installed, flushed, and tested according to valid norms.
- When mounting the product, ensure the wall surface is flat and the wall structure is suitable and free of weak points. The provided screws and dowels are for concrete walls only; consult manufacturer instructions for other wall types.
- Install the mesh washer supplied with the hand shower to prevent dirt from the pipework entering the system. This prevents functional impairment and potential damage, for which Hansgrohe is not liable.
Product Models and Codes
The document lists several Hansgrohe shower system models and their associated product codes:
- Unica's Puro: 28631XXX, 28632XXX
- Raindance S Combi: 27075000, 27076000, 27077000
- Raindance S 100 AIR 3jet / Unica'S Puro Set: 27880000, 27882000
- Raindance S 120 AIR 3jet / Unica'S Puro Set: 27884000, 27886000
- Raindance S 150 AIR 3jet / Unica'S Puro Set: 27895000, 27898000
Diagram Descriptions
The document includes diagrams illustrating:
- Dimensions: Detailed measurements for various shower components and system configurations are provided on pages 31-34.
- Flow Diagrams: Page 33 shows flow rate (Q) in liters per minute (l/min) and liters per second (l/sec) at different pressures (MPa) for specific shower heads.
- Assembly Steps: Pages 35-36 illustrate the step-by-step process for mounting and adjusting the shower system components, including drilling, attaching brackets, connecting hoses, and adjusting the shower height.
- Cleaning: Page 37 demonstrates how to clean the shower head, including soaking in a descaling solution and rinsing.
- Spare Parts: Page 38 provides an exploded view of components with part numbers and a list of spare parts with their corresponding codes and descriptions.
- Certifications: Page 39 presents a table indicating various certifications (P-IX, DVGW, SVGW, WRAS, KIWA, NF, ACS, ETA) for different product models.
Contact Information
For further information, contact Hansgrohe:
Hansgrohe Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com Internet: www.hansgrohe.com