GROHE Blue Pure Minta Kitchen Mixer Tap

Safety Information

The filter head must be replaced after 5 years by GROHE Service. Use only genuine spare parts and accessories. The use of other parts will result in voiding the warranty and the CE marking, and could cause injury.

Areas of Application

The sensor monitors the maximum service life of the filter cartridge. A reminder function is provided by an acoustic signal (<10 days every 15 minutes). Pressing the DISPLAY button mutes the acoustic signal for 3 days. If the maximum service life of 360 days is exceeded, the remaining capacity of the filter cartridge flashes.

The GROHE Blue filter cartridge with activated carbon filter reduces clouding and organic contamination, as well as substances which impair odour and taste, such as chlorine. Furthermore, the filter material captures particles such as sand and suspended solids.

Technical Data

Installation Steps

1. Step 1: Assemble the main body of the tap, including the spout and handle mechanism.
2. Step 2: Mount the tap to the sink or countertop. Secure it from underneath using the provided mounting hardware, ensuring it fits through a hole of up to 45mm thickness.
3. Step 3: Connect the flexible hoses to the tap and the filter outlet hose to the tap's water inlet.
4. Step 4: Connect the filter unit and the display unit.
5. Step 5: Insert the filter cartridge into the filter unit.
6. Step 6: Connect the filter unit to the water supply and the tap's water inlet, noting a 19mm connection size.
7. Step 7: Mount the display unit to the wall.
8. Step 8: Connect the filter unit to the display unit and the water supply.
9. Step 9: Connect the filter unit to the display unit.
10. Step 10a/10b: Mount the filter holder to the wall using screws and wall plugs.
11. Step 11a/11b: Mount the filter holder. A warning symbol ⚡ indicates a potential hazard during this step.
12. Step 12: Insert the filter cartridge into the filter unit.
13. Step 13: Set the display unit by turning the dial to the desired setting (e.g., 360 days).
14. Step 14: Install the filter cartridge into the filter housing.
15. Step 15: Connect the display unit to the filter unit.
16. Step 16: Connect the filter unit to the display unit.
17. Step 17: Final connections showing the filter unit, display unit, and tap connections.

Filter Capacity and Display Unit Setting

After installing a new filter cartridge, the filter capacity must be reset. The programmed service life of the filter cartridge is retained.

When using the activated carbon filter 40547001, set the display unit to 360 days. Refer to the filter's technical product information on page 6 for details.

The display unit shows filter capacity in days (e.g., 90 days, 180 days, 360 days).

Maintenance

Filter Replacement

For filter replacement, refer to pages 8 and 9 and the technical product information for the filter cartridge. After inserting a new filter cartridge, reset the filter capacity.

Battery Replacement

Refer to page 9 for battery replacement. The battery must be replaced at the latest 3 years after commissioning the faucet. User settings are retained even after battery replacement or discharge.

Environment and Recycling

For hygiene reasons, used filter cartridges cannot be recycled. Dispose of used filter cartridges safely with residual waste.

Devices marked with the disposal symbol ♻️ must not be disposed of with household waste. They must be disposed of separately in accordance with national regulations.

Contact Information

For detailed contact information for various countries and regions, please visit the GROHE website.