Y-CONTROL YC-2205-05 Remote Control Specifications
This document outlines the specifications, usage instructions, and electrical characteristics for the YC-2205-05 Bluetooth+Infrared Remote Control.
Supplier Information
| Supplier | Y-CONTROL |
| Material Name | YC-2205-05 |
| Customer Part Number | Bluetooth+infrared-22 K |
| Sample Delivery Date | 2025-06-25 |
Acknowledgment
| Column | Supplier | Make | QC | To Examine | Signature |
|---|---|---|---|---|---|
| Acknowledgment | customer | Certified Engineer | to examine | approval | file |
Resume
| Revision Number | Revise Chapters | Modify Pages | Effective Date | Document and Information Change Request Notice | Issued/Changed By |
|---|---|---|---|---|---|
| V1.0 | 2025.06.25 | First Issue | shuzhongxi |
Remote Control Appearance Diagram
The remote control has a length of 149.00 mm, a width of 42.00 mm, and a depth of 19.3 mm. Key buttons include Power (red), directional buttons (Up, Down, Left, Right), OK, Volume Up/Down, Back, Home, Menu, and dedicated buttons for NETFLIX, YouTube, and Prime Video. It also features a USB port.
Color specifications for the remote control include PANTONE Black C, PANTONE Trans. White, and PANTONE 185 C for specific elements, and PANTONE Process Blue C for the browser button.
Remote Control Code Value Diagram
The remote control utilizes specific code values for its functions. The NEC infrared code mode is used, with System code 0x007F and PID 0x1600, VID 0x2b54. Various buttons are mapped to hexadecimal values, such as 15, 16, 53, 17, 0C, 0F, 10, 0E, 0D, 13, 12, 42, 1B, 4C, 1A, 52, 4F, 4E, 1C, 50, 30, E2, 6C, 6B, 96, 88, 8E, 41, 8F, 8B, 98, 97, 223, E9, 6A, 63, EA, 69, 21F, 209, 62, and 61. The NEC code is specified as 007F.
Technical Specifications and Standards
Remote Control Usage Instructions
- Bluetooth Device Name: Smart BLE Remote
- Key Value of Remote Control: System code: 0x007F Infrared code mode: NEC, PID 0x1600, VID 0x2b54
-
Pairing (Management Function):
- Press the "left+right" button for over 3 seconds simultaneously. The indicator light will flash. Send pairing or clear pairing broadcast (30s).
- Successful pairing: Indicator light changes from flashing to slow flash for 2 seconds, then turns off.
- Unsuccessful pairing/clearing: Press "left+right" again to continue.
- Pairing failed: Indicator light flashes for 30 seconds then turns off. Pressing any key will cause the indicator light to flash a few times, emitting infrared code value.
-
Indicator Light Status:
- Infrared Status: Red light, button press causes LED to flash twice. LED turns off when button is released.
- Bluetooth Status: When activated, button press keeps LED on. LED turns off when button is released.
-
Hibernation:
- No action after power-on: Enter deep sleep after 8 seconds.
- No pairing info and Bluetooth not connected: Press button to enter deep sleep after 8 seconds.
- Pairing info exists, Bluetooth not connected: Enter deep sleep 60 seconds after pressing the button.
- Connected to Bluetooth: Enters shallow sleep mode without operation, with average standby power consumption less than 200uA (maximum ~500uA).
- RF: VOL - Power on
- Low Power: Below 2.2V ± 0.05V, LED flashes for 10 seconds.
CAUTION: Modifications not expressly approved by the responsible party may void the user's authority to operate the equipment.
Electrical Characteristics
| Entry Name | Parameter Range | Notes |
|---|---|---|
| 4.2.01 Ambient Temperature | -25°C - 60°C | |
| 4.2.02 Relative Humidity | < 90% | |
| 4.2.03 Storage Temperature | -10-50°C | |
| 4.2.04 Atmospheric Pressure | 86-106KPa | |
| 4.2.05 Operating Voltage Range | DC2.3V - DC 3.3V | |
| 4.2.06 Transmission Frequency | 2400~2483.5MHz | |
| 4.2.07 Quiescent Current | <3uA | |
| 4.2.08 Working Current | <15mA | |
| 4.2.09 Transmitting Power | <10dBm(3.6V) | |
| 4.2.10 PCB Circuit Board Material | CEM-3 | |
| 4.2.11 Key Load Life | 50000 times | |
| 4.2.12 Electrostatic Environment Test | 15KV | |
| 4.2.13 Free Fall Test | 80cm 6 times | |
| 4.2.14 PCB Wiring Line Width and Spacing | ≥0.3mm | |
| 4.2.15 Modulation | OOK/ASK | |
| 4.2.16 Antenna Type | Onboard Antenna | |
| 4.2.17 Antenna Gain | 10dBm | |
| 4.2.18 Battery | 2 No. 7 batteries | |
| 4.2.19 Shell Temperature Resistance | ≤60°C |
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.