Support Home | Dell US
Installation Guide for DELL models including: OptiPlex 7000 Micro Desktop Computer, OptiPlex 7000, Micro Desktop Computer, Desktop Computer, Computer
DELL OptiPlex 7000 i512500 SFF Intel Core™ i5 8 GB DDR4SDRAM 256 GB 7000 i5-12500 SFF Intel Core™ i5 8 GB DDR4-SDRAM 256 GB SSD Windows 10 Pro PC Black DELL OptiPlex 7000 i5-12500 SFF Intel Core™ i5 8 GB DDR4-SDRAM 256 GB SSD Windows 10 Pro PC Black Information Leaflet
DELL OptiPlex 7000 i5-12500 SFF Intel Core™ i5 8 GB DDR4-SDRAM 256 GB SSD Windows 10 Pro PC Black / YH22V / / DELL Digitotaal
File Info : application/pdf, 15 Pages, 2.71MB
DocumentDocumentOptiPlex Antenna Installation Guide April 2022 Rev. A00 Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell Technologies, Dell, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. Contents Chapter 1: Before you begin ......................................................................................................... 4 Chapter 2: Recommended tools.....................................................................................................5 Chapter 3: OptiPlex Tower Antenna.............................................................................................. 6 Chapter 4: OptiPlex Small Form Factor Antenna............................................................................8 Chapter 5: OptiPlex Micro Antenna..............................................................................................10 Chapter 6: Antenna Placement.....................................................................................................12 Chapter 7: SMA antenna.............................................................................................................. 14 Chapter 8: Getting help............................................................................................................... 15 Contacting Dell................................................................................................................................................................... 15 Contents 3 1 Before you begin Steps 1. Save and close all open files and exit all open applications. 2. Shut down your system: Click Start > Power > Shut down. NOTE: If you are using a Linux operating system, see the documentation of your operating system for shut-down instructions. 3. Disconnect your system and all attached devices from their electrical outlets. 4. Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your system. CAUTION: To disconnect a network cable, first unplug the cable from your system and then unplug the cable from the network device. 5. If the system unit or the adapter is being installed on the monitor: a. Disconnect the power and all the display cables from the monitor. b. Remove the stand from the monitor and place the monitor on a clean and soft surface. 4 Before you begin 2 The procedures in this document may require the following tool: Phillips screwdriver #2 Recommended tools Recommended tools 5 3 OptiPlex Tower Antenna Steps 1. Follow the instructions in Before you begin. 2. Align and connect the antenna cables to the SMA connectors on the chassis. 3. Tighten the bolts to secure the antenna cables to the SMA connectors on the chassis. 4. Slide the SMA cover over the antenna cables. 5. Align the tabs on the SMA cover with the slots on the chassis. 6. Push the SMA cover towards the chassis until it clicks into place. 7. Tighten the captive screw to secure the SMA cover to the chassis. 6 OptiPlex Tower Antenna OptiPlex Tower Antenna 7 4 OptiPlex Small Form Factor Antenna Steps 1. Follow the instructions in Before you begin. 2. Align and connect the antenna cables to the SMA connectors on the chassis. 3. Tighten the bolts to secure the antenna cables to the SMA connectors on the chassis. 4. Slide the SMA cover over the antenna cables. 5. Align the tabs on the SMA cover with the slots on the chassis. 6. Push the SMA cover towards the chassis until it clicks into place. 7. Tighten the captive screw to secure the SMA cover to the chassis. 8 OptiPlex Small Form Factor Antenna OptiPlex Small Form Factor Antenna 9 5 OptiPlex Micro Antenna Steps 1. Follow the instructions in Before you begin. 2. Align and connect the antenna cables to the SMA connectors on the chassis. 3. Tighten the bolts to secure the antenna cables to the SMA connectors on the chassis. 4. Slide the SMA cover over the antenna cables. 5. Align the tabs on the SMA cover with the slots on the chassis. 6. Push the SMA cover towards the chassis until it clicks into place. 7. Tighten the captive screw to secure the SMA cover to the chassis. 10 OptiPlex Micro Antenna OptiPlex Micro Antenna 11 Place the antenna in a suitable location. 6 Antenna Placement 12 Antenna Placement Antenna Placement 13 7 SMA antenna For SMA antenna removal and installation procedures, search for OptiPlex Service Manual at www.dell.com/support. 14 SMA antenna 8 Getting help Contacting Dell Prerequisites NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. About this task Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Steps 1. Go to Dell.com/support. 2. Select your support category. 3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page. 4. Select the appropriate service or support link based on your need. Getting help 15