Home - Homcloud
User Manual for HOMCLOUD models including: WL-RFPS, Wireless PIR Detector, WL-RFPS Wireless PIR Detector
Manuals - Homcloud
Index of /wp-content/uploads/2022/07
Alarm current: ≤20mA Detection range: 8M/110° Wireless distance: ≤150m in open area Frequency: 433mhz±75khz Material: A S plastic Working humidity: ≦80% (No condensation)
File Info : application/pdf, 3 Pages, 161.05KB
DocumentDocumentFeatures Wireless RF Homcloud PIR detector Wireless PIR detector adopt digital infrared dual-corefuzzy logic control processing technology and intelligent analysis algorithms, distinguish interference signals with human motion signals to prevent false alarms effectively. Built-in helical high frequency antenna, longer launch distance, environmental saving, reliable, easy to install, support low battery remind function and so on. Homcloud code: WL-RFPS Model n°: WL-808W Pilot lamp LED lamp flash one time: alarm Installation Installation location need to avoid the place temperature changing fast and air flowing fast lies window, air conditioning, fluorescent lamp, electric heating, fridge, stove and so on. Don't install two detectors in same place to avoid interference with each other. Detection range Fix detector to bracket, adjust the angle of detector and the mounting height of bracket. Mounting 2 meters from floor is best. PIR motion detector is more sensitive for lateralmovement than longitudinalmovement, please install the probing direction perpendicular to the walking direction of the human. Test A. Finished installing, switch power to the ON position, walking in the detecting range ( from left to right or otherwise) and observe whether pilot lamp work normal. B. LED lamp flash one time when detect people movement. C. Adjust angle ofdetector to best detection range Configuration 1. (recommended) For the complete configuration of the sensors read the manual of the Homcloud Alarm Controller. When you have inserted the batteries and the sensor has the LED light on, enter the App in the Homcloud Alarm Control Unit already configured and select the "Add Detectors / Sensors" section, then subsequently: Method A: Move your hadn in front of the PIR sensor The LED light will flash again, a beep will sound (control unit) and the sensor will appear on the App ready to be positioned within a zone or room. Technical parameters Power: 3V Lithium Battery Standby Current: 25uA Alarm current: 20mA Detection range: 8M/110° Wireless distance: 150m in open area Frequency: 433mhz±75khz Material: ABS plastic Working humidity: 80% (No condensation) Per maggiori info www.homcloud.com Imported by: Life365 Italy S.p.A. - European General Agency Viale Roma 49/a, 47122 Forlì, Italy - Made in China