Instruction Manual for DPA MICROPHONES models including: D-FINE In Ear Broadcast Headset Microphone, D-FINE, In Ear Broadcast Headset Microphone, Broadcast Headset Microphone, Headset Microphone, Microphone
DPA D-FINE (03) PDF MANUAL - MANUAL-HUB.COM
d:fineTM In-Ear Broadcast Headset Microphone dpamicrophones.com https://manual-hub.com/ Place the in-ear plug in the ear one of two ways Wind excess cable around the in-ear plug. https://manual-hub.com/ Lengthen headset mount: 1. Shorten headset mount: 1. 2. 2. https://manual-hub.com/ 1. Hold cable lock and draw cables to create excess: 2. Draw the ear hooks away from each other to the desired sizes: 1. Draw small coils on headset mount away from each other to the desired size 2. Hold the cable lock and draw the cables back to fit the shape of the headset mountmounts: DPI-DIM The microphone cable can be changed independently of the headset mount. Dismount the microphone boom and open the cable lock to release the microphone cable. Specifications, In-Ear Connector 3.5 mm stereo Mini-Jack. Single In-Ear: Signal at Mini-Jack Tip Dual In-Ear: Signal at Mini-Jack Tip (Left microphone boom side) and Ring (Right) Type Dynamic earplug Sensitivity 107 dB Nominal impedance 18 Two sizes ear-adapters are included https://manual-hub.com/