Welcome to Pepperl+Fuchs Corporate Website
Welcome to Pepperl+Fuchs Corporate Website
Owner's Manual for PEPPERL FUCHS models including: FB9295B, FB9295B Bus Termination Module, Bus Termination Module, Termination Module
FB9295B | PEPPERL FUCHS | Bus Termination Module
Pepperl Fuchs-FB9295B, Bus Termination Module-542138 | ISC Sales
File Info : application/pdf, 2 Pages, 557.17KB
DocumentDocumentBus Termination Module FB9295B < Terminated bus, service bus < Installation in suitable enclosures in Zone 1 < Module can be exchanged under voltage in Zone 1 (hot swap; be aware bus operation may be affected) Bus termination module, bus and service bus termination Function The device acts as a bus termination resistor to ensure signals are not reflected at the end of the line. It must be used in each last station of a bus line. Connection Release date: 2022-06-29 Date of issue: 2022-06-29 Filename: 542138_eng.pdf Technical Data Supply Connection Directive conformity Electromagnetic compatibility Directive 2014/30/EU Conformity Electromagnetic compatibility Degree of protection Environmental test Shock resistance Vibration resistance Damaging gas Relative humidity Zone 1 backplane bus EN 61326-1 NE 21 IEC 60529 EN 60068-2-14 EN 60068-2-27 EN 60068-2-6 EN 60068-2-42 EN 60068-2-78 Refer to "General Notes Relating to Pepperl+Fuchs Product Information". Pepperl+Fuchs Group www.pepperl-fuchs.com USA: +1 330 486 0002 pa-info@us.pepperl-fuchs.com Germany: +49 621 776 2222 pa-info@de.pepperl-fuchs.com Singapore: +65 6779 9091 pa-info@sg.pepperl-fuchs.com 1 Bus Termination Module Technical Data FB9295B Ambient conditions Ambient temperature -20 ... 60 °C (-4 ... 140 °F) Storage temperature -25 ... 85 °C (-13 ... 185 °F) Relative humidity 95 % non-condensing Shock resistance shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 Vibration resistance frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance Damaging gas designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 Mechanical specifications Degree of protection IP20 (module) , a separate housing is required acc. to the system description Mass approx. 350 g Dimensions 28 x 107 x 132 mm (1.1 x 4.2 x 5.2 inch) Data for application in connection with hazardous areas EU-type examination certificate PTB 97 ATEX 1074 U Marking 1 II 2 G Ex d IIC Directive conformity Directive 2014/34/EU EN 60079-0:2009 EN 60079-1:2007 EN 60079-11:2007 EN 60079-26:2007 EN 61241-11:2006 International approvals Marine approval Bureau Veritas Marine 22449/B0 BV General information System information The module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate. Supplementary information EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Assembly Front view Release date: 2022-06-29 Date of issue: 2022-06-29 Filename: 542138_eng.pdf Refer to "General Notes Relating to Pepperl+Fuchs Product Information". Pepperl+Fuchs Group www.pepperl-fuchs.com USA: +1 330 486 0002 pa-info@us.pepperl-fuchs.com Germany: +49 621 776 2222 pa-info@de.pepperl-fuchs.com Singapore: +65 6779 9091 pa-info@sg.pepperl-fuchs.com 2