Metra Online | Welcome to Metra Auto Parts Online Warehouse
Installation Guide for MeTra models including: JP-1015, JL Wrangler Gladiator Soundbar Speaker Adapter, JT Wrangler Gladiator Soundbar Speaker Adapter
Removal. 1. It is highly reccommonded that the sound bar be removed for install of this speaker adapter kit. 2. Remove all panels along the top trim.
Metra Electronics Corp. Metraonline.com COPRIGHT 2021 METRA EECTRONICS CORPORATION REV. 04/27/2021 INSTP-1015 Attention Wen testing te atermarket euipment ensure tat all actory euip - ment is connected beore cycling te key to ignition. JP-1015 INSTALLATION INSTRUCTIONS
File Info : application/pdf, 8 Pages, 2.05MB
DocumentDocumentJP-1015 INSTALLATION INSTRUCTIONS Jeep Wrangler JL 2018-up* & Gladiator JT 2020-up* Soundbar Speaker Kit Visit Metraonline.com for more detailed informatuon about the product and up-to-date vehicle specific applications. Part Components Product Features · Designed to adapt the factory 4" to 6.5" with a tweeter option · Speaker depth 3 5/8" · Mounting plate/cutting template included · Hardware included · Harness included (12") A) Speaker covers B) Mounting/Cutting Template C) Harness and Hardware TABLE OF CONTENTS Soundbar Removal................................................2 Template cutting................................................ 3-4 Re-assembly ..........................................................5 Speaker install........................................................6 In box components and measurements...........7-8 TOOLS REQUIRED · 3/16 Allen bit · Phillips bit · Reciprecating saw or other cutting device A B C Attention! When testing the aftermarket equipment, ensure that all factory equip- ment is connected before cycling the key to ignition. Metra Electronics Corp. ® Metraonline.com ©COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 04/27/2021 INSTJP-1015 SOUNDBAR REMOVAL Removal 1. It is highly reccommonded that the sound bar be removed for install of this speaker adapter kit. 2. Remove all panels along the top trim of the vehicle to gain access to the soundbar. (Figure A) 3. Remove all the screws holding the sound bar to the vehicle. Please be careful and have access to help if needed to not break or damage the vehicle or soundbar. (Figure B) 4. Unplug the harness and remove soundbar from the vehicle. Figure A Figure B 2 386-257-1187 | Metraonline.com TEMPLATE CUTTING 1. Remove the screws holding the grill in place. 2. Remove the speakers from the soundbar. 3. Carefully hide the harness in the soundbar as to not cut the wiring while cutting the interior structure of the soundbar. 4. Place the template in place and secure with the provided (9) screws. (Figure A) 5. Trace the area highlighted in Figure B and remove template, this will be the area that needs to be cut. NOTE: Only trace and cut the smaller circle if a tweeter is being used. Figure A Figure B REV. 04/27/2021 INSTJP-1015 3 TEMPLATE CUTTING (CONT.) 5. Remove the template and cut the traced area carefully. Be sure not to cut through to the back of the soundbar and not to cut through the wiring in the bar. Also be careful not to cut the 4 outter most threaded holes as those will be used to secure the grill. 6. Figure D is with the section cut out and removed. Re-install the metal cutting template. This will be used as a mounting surface for the grill. Figure C 4 Figure D 386-257-1187 | Metraonline.com Assembly 1. After re-installing the metal cutting template using the ( 9 ) provided screws, line up the grille and check the cut made previously. (Figure A) 2. Make sure the speaker fits properly and the depth is good. Depth is 3 5/8". 3. If everything is good, attach grille using the provided (6) screws. (Figure B) RE-ASSEMBLY Figure A Figure B REV. 04/27/2021 INSTJP-1015 5 SPEAKER INSTALL Install 1. Install the desired speaker, attach harness to speaker pod wiring and speaker. Mount the speaker using the mounting holes that are provided. Not all holes are needed for mounting. (Figure A) 2. Use with desired speaker grille provided with speaker. This adapter will also work with our Metra speaker grille BC-SPG. (Figure B) 3. Repeat previeous steps on opposite side of soundbar. Figure A Figure B 6 386-257-1187 | Metraonline.com IN BOX COMPONENTS Grille Replacement (2) Cutting Template/grille support (2) Sound deadening padding included, not pictured (2) Speaker mounting screws (8) Grille replacement mounting screws (12) Cutting template/grille support screws (20) Speaker Harness (2) REV. 04/27/2021 INSTJP-1015 7 JP-1015 INSTALLATION INSTRUCTIONS Depth: 3 5/8" Mouting hole diameter: 5 5/8" Overall diameter: 7 1/4" Having difficulties? We're here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra Recommends MECP certified technicians Metra Electronics Corp. ® Metraonline.com ©COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 04/27/2021 INSTJP-1015