User Manual for EDIMAX models including: EN-9320SFP V2 10 Gigabit Ethernet SFP PCIe Network, EN-9320SFP V2, 10 Gigabit Ethernet SFP PCIe Network, Ethernet SFP PCIe Network, PCIe Network
%product-title% - Conrad Electronic Suisse
EDIMAX EN-9320SFP V2 1 port PCI Express card SFP PCIe x4 EDIMAX EN-9320SFP V2 4717964704634
EDIMAX EN-9320SFP V2 1 port PCI Express card SFP PCIe x4 | Conrad.com
File Info : application/pdf, 12 Pages, 1.59MB
DocumentDocumentEN-9320SFP+ V2 Quick Installation Guide 05-2022 / v1.0 I. Product Information The EN-9320SFP+ V2 equipped with Marvel AQC100 controller delivers 10Gbps (Max.) data transmission and effectively prevents packet loss. I-1. Package Contents EN-9320SFP+ V2 QIG Low Profile Bracket I-2. LED Status Function SPEED (Link) Activity LED Status On (Amber) Off On (Green) Blinking (Green) Off Definition Link at 10Gbps / 1Gbps Port disconnected or link fail Link at 10Gbps / 1Gbps Data transmitting Port disconnected or link fail I-3. System Requirements* - Supported Operating System: Windows7/8/8.1/10/11 or Linux - Empty PCIe 2.0 Slot (x4 or Higher) *Additional version information may be announced on the EDIMAX website. 1 II. Hardware Installation 1. Turn off your computer, unplug the power, and remove the computer case panel. Refer to your computer's user manual if you are unsure how to remove the case panel and find the location of an availiable PCIe slot. 2. Insert the EN-9320SFP+ V2 Network Adapter into an available PCIe slot. An additioanal Low Profile bracket is also included in the package contents. 3. Secure the EN-9320SFP+ V2 in place by screwing the metal bay screw, and turn on the computer. 2 III. Driver Installation Please follow the instructions below to install the driver. III-1. Download the Driver Please access the link below. Search the model no. "EN-9320SFP+ V2" in the search box. Find the proper driver for your Operation System, click to download and save it your computer Desktop. https://www.edimax.com/download III-2. Unzip the Driver After you downloaded the proper driver for your Operating System, please unzip it from your computer Desktop for driver installation. III-3. Install the Driver Click on "Marvell_FastLinQ_Edge", and follow the steps of setup wizard to complete the driver installation. 3 4 III-4. Confirmation of Driver Installation To confirm the EN-9320SFP+ V2 is working properly with following steps. A. Right-click the Windows Start Manager". button, and select the "Device B. Double-click the "Network Adapter" to expend the list of Nework Adapter. C. Right-click on the Network adapter and select "Properties". EN-9320SFP+ v2 is working properly!! . 5 IV.More Information For more information, please visit our website with the following URL or scan the QR code: https://www.edimax.com/download Please search the model no. "EN-9320SFP+ V2" to enter the referred page. V. Safety Instructions The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage. Remember to consult the product user instructions for more details. This product is designed for indoor use only. Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal) before touching the product. The device contains no user serviceable parts. Do not attempt to service the product and never disassemble the product. Do not spill food or liquid on your product and never push any objects into the openings of your product. Do not use this product near water, areas with high humidity, or condensation. Keep the product away from radiators and other heat sources. This device is not designed to be operated by children. Always unplug the product from mains power before cleaning and use a dry lint free cloth only. 6 COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability, or fitness for any particular purpose. Any software described in this manual is sold or licensed as is. Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right to revise this publication and to make changes from time to time in the contents hereof without the obligation to notify any person of such revision or changes. The product you have purchased and the setup screen may appear slightly different from those shown in this QIG. The software and specifications are subject to change without notice. Please visit our website www.edimax.com for updates. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders. 7 FCC Caution This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment. EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland. EU Countries Not Intended for Use None 8 EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/30/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/30/EU. Cestina: Toto zaízení je v souladu se základními pozadavky a ostatními píslusnými ustanoveními smrnic 2014/30/EU. Polski: Urzdzenie jest zgodne z ogólnymi wymaganiami oraz szczególnymi warunkami okrelonymi Dyrektyw UE 2014/30/EU. Român: Acest echipament este în conformitate cu cerinele eseniale i alte prevederi relevante ale Directivei 2014/30/EU. : 2014/30/EU. Magyar: Ez a berendezés megfelel az alapvet követelményeknek és más vonatkozó irányelveknek (2014/30/EU). Türkçe: Bu cihaz 2014/30/EU. direktifleri zorunlu istekler ve dier hükümlerle ile uyumludur. : 2014/30/EU. Slovencina: Toto zariadenie spa základné poziadavky a alsie príslusné ustanovenia smerníc 2014/30/EU. Deutsch: Dieses Gerät erfüllt die Voraussetzungen gemäß den Richtlinien 2014/30/EU. Español: El presente equipo cumple los requisitos esenciales de la Directiva 2014/30/EU. Italiano: Questo apparecchio è conforme ai requisiti essenziali e alle altre disposizioni applicabili della Direttiva 2014/30/EU. Nederlands: Dit apparaat voldoet aan de essentiële eisen en andere van toepassing zijnde bepalingen van richtlijn 2014/30/EU. Português: Este equipamento cumpre os requesitos essênciais da Directiva 2014/30/EU. Norsk: Dette utstyret er i samsvar med de viktigste kravene og andre relevante regler i Direktiv 2014/30/EU. Svenska: Denna utrustning är i överensstämmelse med de väsentliga kraven och övriga relevanta bestämmelser i direktiv 2014/30/EU. Dansk: Dette udstyr er i overensstemmelse med de væsentligste krav og andre relevante forordninger i direktiv 2014/30/EU. suomen kieli: Tämä laite täyttää direktiivien 2014/30/EU. oleelliset vaatimukset ja muut asiaankuuluvat määräykset. ----------------------------------------------------------------------------------------------------------------------- WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal. 9 Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: 10 Giga SFP+ port PCIE NIC Model No.: EN-9320SFP+ V2 The following European standards for essential requirements have been followed: Directives 2014/30/EU EMC : EN 55032:2015/A11:2020 EN 55035:2017/A11:2020 AS/NZS CISPR 32:2015 Edimax Technology Europe B.V. Fijenhof 2, 5652 AE Eindhoven, The Netherlands Date & Place of Issue: 31/May/2022, Eindhoven Signature: Printed Name: David Huang Title: Director a company of: Edimax Technology Co., Ltd. No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan Date & Place of Issue: 31/May/2022, Taipei Signature: Printed Name: Hunter Chen Title: Director 10 Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the United Kingdom EMC and Safety directives. Equipment: 10 Giga SFP+ port PCIE NIC Model No.: EN-9320SFP+ V2 The following European standards for essential requirements have been followed: Electromagnetic Compatibility Regulations 2016 (S.I. 2016/1091) EMC : EN 55032:2015/A11:2020 EN 55035:2017/A11:2020 AS/NZS CISPR 32:2015 Edimax Technology Europe B.V. Fijenhof 2, 5652 AE Eindhoven, The Netherlands Date & Place of Issue: 31/May/2022, Eindhoven Signature: Printed Name: David Huang Title: Director a company of: Edimax Technology Co., Ltd. No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City, Taiwan Date & Place of Issue: 31/May/2022, Taipei Signature: Printed Name: Hunter Chen Title: Director 11
EDIMAX - Netwoking Solution Provider including SMB Wi-Fi Access Point, AP Controller, SMB and Industrial PoE++ L2+ Switch, Industrial Embedded Wirless (Wi-Fi, Bluetooth) USB Dongle (Adapter), Wi-Fi Smart Plug, IoT, Smart HomeEDIMAX - Netwoking Solution Provider including SMB Wi-Fi Access Point, AP Controller, SMB and Industrial PoE++ L2+ Switch, Industrial Embedded Wirless (Wi-Fi, Bluetooth) USB Dongle (Adapter), Wi-Fi Smart Plug, IoT, Smart HomeEDIMAX - Download