Instruction Manual for RSSLO models including: E412 Electro Locomotive, E412, Electro Locomotive, Locomotive
E 412 Electro locomotive © Copyright Fastmake d.o.o., all rights reserved Version 1.0 Train Simulator Classic E 412 1. Rolling stock ............................................................................... 3 1.1. E 412 ............................................................................................................................................. 3 2. Cab controls ............................................................................... 4 2.1. Picture 1: Right side...................................................................................................................... 4 2.2. Picture 2: Left side ........................................................................................................................ 5 2.3. Picture 3: Panel............................................................................................................................. 6 2.4. SIFA ............................................................................................................................................... 7 2.5. 3 kV - 15 kV System ...................................................................................................................... 7 2.6. LZB ................................................................................................................................................ 8 3. Keyboard.................................................................................... 9 4. Scenarios.................................................................................. 10 4.1. E412 Brenner morning ............................................................................................................... 10 4.2. E412 Loco train ........................................................................................................................... 10 4.3. E412 Wood for Brenner.............................................................................................................. 10 © Copyright 2023 Fastmake d.o.o., all rights reserved 2 Version 1.0 Train Simulator Classic E 412 1. Rolling stock 1.1. E 412 Model name in Train simulator is: E 412 3Kv, E412 15kV © Copyright 2023 Fastmake d.o.o., all rights reserved 3 Version 1.0 Train Simulator Classic E 412 2. Cab controls Picture 1: Right side 2.1. Picture 1: Right side Horn (1) Cruise control (2) Train brake (3) Headlights (4) High beam light (5) Cab light (6) Desk light (7) Wipers (8) Instrument light (9) © Copyright 2023 Fastmake d.o.o., all rights reserved 4 Version 1.0 Train Simulator Classic E 412 Picture 2: Left side 2.2. Picture 2: Left side Loco Brake (1) PZB Override (2) Release spring brake (3) Apply spring brake (4) PZB Release (5) PZB Acknowledge (6) Throttle/Dynamical brake lever (7) Train brake (8) Sander (9) Reverser (10) © Copyright 2023 Fastmake d.o.o., all rights reserved 5 Version 1.0 Train Simulator Classic E 412 2.3. Picture 3: Panel Pantograph control (1) Main switch off (2) Main switch on (3) System select (3Kv-15Kv) (4) Picture 3: Panel © Copyright 2023 Fastmake d.o.o., all rights reserved 6 Version 1.0 Train Simulator Classic E 412 2.4. SIFA The SIFA is disabled on startup, but can be activated with »SHIFT + NUM ENTER«. You can choose between basic SIFA and advance SIFA. Basic SIFA You must confirm SIFA within 30 seconds from your last confirm. If it was not confirmed in 30 seconds then the emergency brake will be applied. Before the emergency brake will be applied the warning voice will turn on. Advance SIFA You can hold the SIFA button down for max. 30 seconds but if you hold it more than 30 seconds, the emergency brake will be applied, before this happens the warning voice will turn on. When the SIFA button is not hold, then the emergency brake will be applied after 5 seconds. If the emergency brake is applied, then you must press SIFA button again and release the train brake. 2.5. 3 kV - 15 kV System The name of the locomotive (3 kV or 15 kV) tells you the starting system. If you want to start on a route that has the 3 kV system, then select the 3 kV locomotive and 15 kV if you start on a route that has the 15 kV System. Changing the system: 1. Turn off main switch 2. Lower the pantograph 3. Change system 4. Raise the pantograph 5. Turn on the main switch When you drive on a station where the system is changed, then you will need to lower the pantograph and select the right system (Picture 3 - number 4). If the system is not selected correctly on the locomotive, then you cannot turn on main switch on. The locomotive is checking the system every time, when the pantograph is up. © Copyright 2023 Fastmake d.o.o., all rights reserved 7 Version 1.0 Train Simulator Classic E 412 2.6. LZB The locomotive hat the LZB system and you can't turn it off! Picture 4: LZB If the locomotive comes in the track sections with LZB, then the LZB will be automatically turn on and the "Ü" light will turn on (1). On the display, you can see now how far it is to the next speed limit (2), also the next speed limit is showed under the speed pointer (4). If you drive too fast the indication (3) will turn on. When the brake indication starts flashing, then you have 5 seconds to reduce the speed. If you don't reduce the speed the emergency brake will be applied. If emergency brake is applied, then you must wait until the train stops! When the yellow indicator starts flashing "ENDE", you have 10 seconds to confirm it with PZB Acknowledge button. If you don't confirm it in 10 seconds, then emergency brake will be applied. The "ENDE" indicator tells you that LZB will be off after about 1.7 km. When LZB is turned on the PZB will be automatically turned off. © Copyright 2023 Fastmake d.o.o., all rights reserved 8 Version 1.0 Train Simulator Classic E 412 3. Keyboard Function Increase / Decrease - Throttle / dynamical brake Increase / Decrease Reverser Increase / Decrease Train Brake Increase / Decrease Cruise control Horn 1 PZB on/off PZB mode PZB override PZB release PZB acknowledge SIFA on / off Confirm SIFA SIFA Basic/Advance Headlights Wipers Sander Pantograph Desk lights Cab light Main Switch Cruise control on/off Keyboard A / D W / S `' / ; Y/C Space Ctrl + Num Enter Shift + 7 Delete End Page down Shift + Num enter Q Shift + S H (SHIFT + H) V X P I L Z Shift + A © Copyright 2023 Fastmake d.o.o., all rights reserved 9 Version 1.0 Train Simulator Classic E 412 4. Scenarios 4.1. E412 Brenner morning 1. Rating: **** 2. Duration: 45min 3. Scenario type: Carrer scenario 4. Route: Tirol Austria 4.2. E412 Loco train 1. Rating: * 2. Duration: 15min 3. Scenario type: Carrer scenario 4. Route: Tirol Austria 4.3. E412 Wood for Brenner 1. Rating: ***** 2. Duration: 30min 3. Scenario type: Carrer scenario 4. Route: Tirol Austria © Copyright 2023 Fastmake d.o.o., all rights reserved 10 Version 1.0Microsoft Word for Microsoft 365