Instruction Manual for CEILING SAM models including: Tote Slide Pro Storage System, Slide Pro Storage System, Pro Storage System, Storage System

Download Installation Manual

Ceiling SAM Tote Slide PRO — Garage Craft Direct


File Info : application/pdf, 14 Pages, 10.86MB

PDF preview unavailable. Download the PDF instead.

Tote Slide Pro Installation Manual FINAL LOW removed ?v=1713026724
Tote slide pro storage SYSTEM
We highly recommend watching our installation
video before beginning your installation
INSTALLATION INSTRUCTIONS
CeilingSAM.com/installation IMPORTANT: READ THROUGH ENTIRE INSTRUCTIONS
BEFORE BEGINNING ANY INSTALLATION

Tote SIide Storage System
MISSING A PART? There is no need to return this unit to the seller. Please email: info@ceilingstorageandmore.com
We appreciate your purchase of the CeilingSAM Tote Slide Pro Storage System. CeilingSAM has made every effort to supply a quality product that ensures a lifetime of trouble-free service. In the event that you encounter any urgent problems, please call our toll-free number at 833-255-1122 BEFORE RETURNING THE UNIT TO THE SELLER.
CeilingSAM Heavy Duty Tote Slide Lifetime Limited Warranty
CeilingSAM warrants this ceiling storage system against defects in the material and workmanship for the life of the product. CeilingSAM agrees to either repair the product or replace it at the sole discretion of CeilingSAM . This warranty does not include the costs associated with the physical installation, removal, or return of the CeilingSAM Tote Slide Storage System.
This warranty is valid and enforceable provided that the maximum weight supported by each Heavy Duty Tote Slide Storage System does not exceed 150 lbs per row, evenly distributed. The customer, dealer, and/or installer releases CeilingSAM of all claims, which includes the CeilingSAM ceiling unit and the structure it is attached to.
This unit must also be installed according to the manufacturer's instructions (both written and/or by video). At no time should you install more than two Heavy Duty Tote Slide Pro Storage systems on any two ceiling rafters, trusses, or ceiling studs. All hardware and fasteners must be checked and tightened at least annually.
Only the original purchaser of this product is extended this warranty. No warranty work will be provided under this warranty without purchaser's original receipt or other proof of the date of the original purchase acceptable to CeilingSAM. There are NO other warranties expressed or implied except those stated herein as required by applicable law.
This CeilingSAM limited warranty covers product failure due to defects in materials or workmanship ONLY! It does not cover corrosion, rust or discoloration of it components, or product failure due to misuse, abuse, faulty installation, alteration, lack of reasonable care, or any other failure not related to the defects in materials or workmanship.
There are NO other warranties expressed or implied except those stated herein as required by applicable law.
CEILING SAM SHALL NOT BE LIABLE FOR INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL IMPLIED WARRANTIES, IF ANY, INCLUDING IMPLIED WARRANTIES OR MERCHANTABILITITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitation on how long an implied warranty lasts, so the above exclusions or limitation may not apply to you. No other warranty, written or verbal, will be honored for this product. This warranty gives you the specific legal right and you may also have other rights that vary from state to state.
CeilingSAM is not responsible for damages of merchandise in transit. Repaired or replaced products shall be subject to the terms of this warranty, to be inspected by CeilingSAM prior to return shipment. Damages incurred during transit should be reported at once to the carrier and a claim should be filed with them.
CeilingSAM - www.CeilingSAM.com Phoenix, AZ 85281

REQUIRED TOOLS:

Tote SIide Storage System
TOte Slide pro Storage System

18v Cordless Drill

Ladder

Stud Finder

Tape Measure

Safety Glasses

Marking Pencil

1/2" Socket

3/16" Drill Bit

Socket Extender (Optional)

Tote SIide Storage System STEP 1: UNBOX YOUR TOTE SLIDE STORAGE SYSTEM - Make sure all parts are included
parts included: TOte Slide pro
PARTS INCLUDED IN YOUR TOTE SLIDE STORAGE SYSTEM:

Support Rail (x4)
Channel Rail Connector (x4)
Washer (x8)

Channel Rail (x8) Lag Screw (x8) Hex-Bolt(x24)

Slide-Nut (x8)

Spare Parts

Tote SIide Storage System
CONFIGURATION OPTIONS

450Lb tote slide pro
Parallel with the Ceiling joists

perpendicular to the Ceiling joists

Tote SIide Storage System
MOUNT your support rails

STEP 2: MOUNT YOUR SUPPORT RAILS

- Use a Stud Finder to locate the Ceiling Joists.

- Pre-drill at the very center of the joists with a 3/16" Drill Bit before inserting the Lag Screws.

- Parallel with the ceiling joists: Mount two support rails 48" apart, using 4 Lag Screws with Washers.
48"

- Perpendicular to the ceiling joists: Mount two support rails 48" apart, using 4 Lag Screws with Washers.
48"

Lag Screw &
Washer

Tote SIide Storage System
ASSEMBLE AND MOUNT YOUR CHANNEL RAILS

STEP 3: ASSEMBLE AND MOUNT YOUR CHANNEL RAILS

- Connect the Channel Rails using Channel Rail Connectors.

- Fasten the Hex Bolts using a 1/2" Socket.

- Insert the Hex Bolts into the Channel Rails 48" apart, and loosely hand-tighten the Slide Nuts. Ensure the teeth are facing down.

- Mount the Channel Rails by rotating the Slide Nuts 90 degrees inside the Support Rails.

90°

Tote SIide Storage System
FASTEN YOUR CHANNEL RAILS

STEP 4: FASTEN YOUR CHANNEL RAILS
- Fasten the first Channel Rail using a 1/2" Socket.

- Use an empty Tote to align the second Channel Rail. Ensure a snug fit.

- Ensure the Channel Rails are in-line by measuring from the Support Rail to the tip of the Channel Rails. Adjust if necessary.

- Fasten the second Channel Rail using a 1/2" Socket.

LOADING

Tote SIide Storage System

STEP 5: LOADING
- We recommend no more than 35 lbs. per Tote. Each row has a load capacity of 150 lbs.

- ONLY use Totes with a thick reinforced "lip".

35 lbs. 35 lbs. 35 lbs. 35 lbs.

- The standard 27-gallon Totes require ~18" of clearance from the ceiling.

- The standard 17-gallon Totes require ~15" of clearance from the ceiling.

18" 27 gal.

17 gal.

15"

Tote SIide Storage System
extra storage

STEP 6: Extra Space - To maximize your storage, leave a 24" gap
between your Support Rails.

- Organize your totes in either direction.

- If you combine 2 systems, you will get an extra row of storage.

- The Tote Slide Pro holds 450 lbs. of distributed weight.

450 lbs.

Tote SIide Storage System
extra storage

STEP 6: Extra Space

- Purchase Hooks on our website for additional storage!

- Organize bikes, ladders, and more!

YOUR INSTALLATION IS NOW COMPLETE! Please visit our website for more information:
www.CeilingSAM.com



References

iLovePDF