TopLux UFO Highbay LED Luminaire - User Manual

1. Safety Precautions

General Safety:

• Installation should only be performed by qualified electricians in accordance with local electrical codes and regulations.
• Ensure the power supply is switched OFF at the main circuit breaker before commencing any work.
• Do not operate the luminaire if it is damaged in any way.
• Avoid direct eye exposure to the light source.
• This luminaire is intended for indoor or covered outdoor use. Protect from direct water spray unless specified otherwise by the product model (e.g., IP65 rating).
• Ensure proper ventilation around the luminaire.

Electrical Safety:

• Verify that the mains voltage matches the voltage rating of the luminaire.
• All wiring connections must be secure and properly insulated.
• The luminaire must be earthed.

2. Product Overview

The TopLux UFO Highbay LED Luminaire series offers high-efficiency, long-lasting illumination for industrial and commercial spaces such as warehouses, factories, gymnasiums, and large retail areas. These luminaires are designed for superior light distribution and energy savings.

Key features include:

• High luminous efficacy (e.g., up to 150 lm/W).
• Durable construction with excellent heat dissipation.
• Various wattage options (e.g., 100W, 150W, 200W).
• Multiple color temperature choices (e.g., 4000K, 5000K).
• Wide beam angle options (e.g., 90°).
• Optional integrated sensors for motion detection and daylight harvesting.
• High IP rating (e.g., IP65) for dust and water resistance.

3. Specifications

Below are typical specifications for the TopLux UFO Highbay LED Luminaire series. Refer to the specific product label for exact details.

4. Installation Instructions

Unpacking and Inspection:

Carefully unpack the luminaire and check for any signs of damage incurred during shipping. Ensure all components listed in the package contents are present.

Mounting Options:

The TopLux UFO Highbay can be mounted in several ways:

• Suspension Mounting: Use the provided eye bolt or mounting bracket to suspend the luminaire from a ceiling structure using a chain or cable. A textual description of a diagram shows the eye bolt being screwed into the top of the luminaire, with a chain attached to it, ready for suspension.
• Surface Mounting: Some models may support direct surface mounting using appropriate brackets.

Wiring:

Follow these steps for electrical connection:

1. Ensure the power supply is completely disconnected.
2. Open the luminaire's junction box or access panel.
3. Connect the mains supply wires:
   • Live (L): Connect to the terminal marked 'L'.
   • Neutral (N): Connect to the terminal marked 'N'.
   • Earth (E): Connect to the green/yellow earth terminal.
4. If the luminaire features a sensor, refer to the sensor-specific wiring diagram for connecting control wires (e.g., for dimming or motion detection). A diagram illustrates the typical connections: AC input (L, N, E) to the driver, and then output wires from the driver to the LED module. Sensor wires are shown connecting to the driver or a dedicated sensor module.
5. Secure all connections and ensure no exposed wires.
6. Close the junction box or access panel.

Sensor Setup (if applicable):

For models equipped with sensors, refer to the sensor's specific manual or the integrated instructions within this manual for calibration and setting adjustments (e.g., sensitivity, time delay, lux level).

Final Check:

Double-check all wiring and mounting before restoring power.

5. Operation and Maintenance

Operation:

Once installed and powered on, the luminaire will operate according to its design. If equipped with a sensor, it will respond to motion or ambient light levels as configured.

Maintenance:

• Regular cleaning of the luminaire housing and lens is recommended to maintain optimal light output and prevent overheating. Use a soft, damp cloth. Avoid abrasive cleaners.
• Periodically inspect wiring and connections for signs of wear or damage.
• Ensure ventilation openings are clear of dust and debris.

6. Troubleshooting

If the luminaire does not operate correctly, consult the following table:

7. Warranty Information

TopLux provides a limited warranty for its LED luminaires. Please refer to the warranty card included with your product or visit the TopLux website for detailed terms and conditions.

Contact Information:

For technical support or warranty claims, please contact TopLux or your authorized distributor.