RKROYAL RK71 KLUDGE Mechanical Keyboard User Manual

Product Overview

This document provides instructions for the RKROYAL RK71 KLUDGE Mechanical Keyboard.

Keyboard Features

The RKROYAL RK71 KLUDGE is a mechanical keyboard designed for versatile use, supporting both wired and wireless (Bluetooth) connectivity.

Wired Mode and Charging

Power Switch: Located on the keyboard, switch to 'ON' to power the device, 'OFF' to conserve battery.

Charging Indicator:

When charging, a red light is illuminated.
The red light turns off upon full charge.
A flashing blue light indicates low voltage.

Bluetooth Connection

Bluetooth Code Indicators

Q key: Red indicator
W key: Blue indicator
E key: Green indicator

Connecting Devices

Turn on the keyboard's power switch.
Pairing: Short press FN+Q, FN+W, or FN+E to initiate Bluetooth pairing for the respective indicator. Long press FN+Q/W/E for pairing mode.

Backlight Control

Backlight Modes and Adjustments

Toggle backlight color (RGB)
Increase backlight brightness
Decrease backlight brightness
Increase backlight speed
Decrease backlight speed

Custom Backlight Recording

To record custom backlight settings:

Press the FN key.
Press FN + Home to enter backlit recording mode.
Press the desired key (Q, W, or E) to select a profile for recording.
Press FN + Home again to save the recorded backlight mode.

Other keys mentioned for control: ScrLk, Pause, End.

Multimedia Keys

Windows Multimedia Functions

My Computer: FN + F7
Explorer: FN + F8
Mailbox: FN + F9
Calculator: FN + F10
Previous Track: FN + F7
Play/Pause: FN + F10
Next Track: FN + F9
Mute: FN + F8
Volume Down: FN + F11
Volume Up: FN + F12
Player: FN + F11 (Note: This appears to be a duplicate function for FN+F11)
Windows Mode Switch: FN + A (Functionality described as "Cut Windows", likely for OS switching)

MAC Multimedia Functions

MAC OS Mode Switch: FN + S (Functionality described as "CUT MAC OS" and "MAC OS AND ALT Key swap", likely for OS switching and key mapping)
Previous Track: FN + F7
Play/Pause: FN + F10
Next Track: FN + F9
Mute: FN + F8
Volume Down: FN + F11
Volume Up: FN + F12

System Requirements

Bluetooth Connectivity

Bluetooth 3.0, Bluetooth 5.1, or a later version of the device.

Computer Compatibility

PC: Windows 7 or higher.
Mac: macOS X 10.6 Snow Leopard or higher.
iOS: iPad/iPhone 5 or higher.
Android: Android 5.0 or higher.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.