COUGAR OmnyX PC Case
Your Build. Your Vision. Any Side You Like.
Features
- Perfectly symmetrical design allows for omnidirectional placement.
- Quad 160mm fan support with flexible intake modes.
- Integrated cable management compartment under the base completely eliminates cable clutter.
- Sliding rail system allows for IO module relocation and expanded port array.
- Support for vertical GPU mounting without needing an additional bracket.
- Accommodates a maximum GPU length of 380mm.
- Compatible with reverse connector motherboards.
- Magnetic dust filter panel and quick release cable management compartment covers make maintenance a breeze.
Specifications
| Product Name | OmnyX / 双擎X |
| Case Form Factor | Mid Tower / 中塔机箱 |
| Motherboard Type | Mini ITX / Micro ATX / ATX |
| Dimension (WxHxD) | 300 x 520 x 470 (mm) / 11.8 x 20.5 x 18.5 (in) |
| I/O Panel | USB 3.2 Gen 2 Type-C x 2, USB 3.0 Type-A x 4, 4 Pole Headset Audio Jack x 1 |
| 2.5" Drive Bay | 2 |
| 3.5" Drive Bay | 2 |
| Expansion Slots | 7 (horizontal slots can be converted into vertical slots) |
| Cooling Fan Support | Front: *120mm x 2 / *140mm x 2 / 160mm x 2 M/B Side: 120mm x 3 Rear: *120mm x 2 / *140mm x 2 / 160mm x 2 |
| Maximum Number of Fans | 7 |
| Water Cooling Radiator Support | Front: *280mm / *240mm M/B Side: 360mm / 240mm Rear: *280mm / *240mm |
| Max. Graphics Card Length | 380(mm) / 15(in) |
| Max. CPU Cooler Height | 170(mm) / 6.7(in) |
| Max. PSU Length | 200(mm) / 7.9(in) |
Specifications might vary depending on the country or region of sale.
*A dedicated bracket is required for installing 120mm / 140mm fans and water cooling. The bracket may not be included in some regions. Please check with the retailer before purchasing.
Assembly Drawing
An exploded view illustrating the components of the COUGAR OmnyX PC case.
Component List:
- A: Power button / USB 3.2 Gen 2 Type-C x 2 / USB 3.0 Type-A x 4 / 4 Pole Headset Audio Jack
- B: Tempered glass side panel
- C: Top glass panel
- D: Metal mesh side panel
- E: Metal mesh panel
- F: Detachable fan / radiator bracket (packed separately)
- G: Detachable fan bracket
- H: Metal decorative panel
- I: Metal top cover decorative panel
- J: Plastic magnetic I/O cord cover
- K: Plastic magnetic cable cover (a)
- L: Plastic magnetic cable cover (b)
- M: Metal cable cover
- N: Plastic Cable Management Bracket (a)
- O: Plastic Cable Management Bracket (b)
- P: Expansion slots (Reversible)
- Q: Detachable PSU bracket
- R: Detachable 2.5" SSD and 3.5" HDD bracket
Installing The I/O Connectors
Diagrams show the rear I/O panel layout and the corresponding cables for USB 3.0, USB-C, HD AUDIO, LED SW, F_PANEL, and HDD LED connectors.
Accessory Kit
A list of included accessories and their quantities:
- 3.5" HDD screws (x10)
- Motherboard screws & 2.5" SSD screws (x19)
- Stand-off for motherboard (x1)
- Countersunk head screws (long) (x4)
- Countersunk head screws (short) (x10)
- Round head screws (x2)
- Expansion slot bezel screws (x1)
- Stand-off socket attachment (x2)
- Cable ties (x10)
Metal Mesh Panel Removal Instructions
Diagram shows how to remove the front metal mesh panel by gently pulling it outwards from the bottom edge.
Glass Panel Removal Instructions
Diagrams illustrate the removal of the side glass panel:
- Step 1: Shows the glass panel attached to the chassis.
- Step 2: Indicates pulling the glass panel outwards from the top edge, utilizing a finger slot. The instruction reads: "Please remove the glass panel through the finger slot." ➡️
- Step 3: Shows the glass panel successfully removed.
Metal Mesh Side Panel Removal Instructions
Diagrams detail the removal of the metal mesh side panel:
- Step 1: Shows the removal of a plastic magnetic cable cover first. The instruction reads: "Please remove the plastic magnetic cable cover first." ➡️
- Step 2: Illustrates pulling the metal mesh side panel outwards from the bottom edge, using a finger slot. The instruction reads: "Please remove the metal mesh side panel through the finger slot." ➡️
Magnetic Cable Cover Removal Instructions
Diagrams show the process of detaching magnetic cable covers from the case.
Metal Decorative Panel Removal Instructions
Diagrams illustrate the removal of decorative metal panels from the front of the PC case.
Installing Water Cooling Radiators & Cooling Fans
Diagrams show various mounting locations and dimensions for water cooling radiators and fans:
- Front/Rear/M/B Side: Specifies compatible radiator sizes (e.g., 240mm, 280mm, 360mm) and fan configurations (e.g., 120mm, 140mm, 160mm).
- Illustrations depict mounting fans on the front, rear, and side mounts, with a note that a dedicated bracket is required for 120mm/140mm fans and water cooling, and this bracket may not be included in all regions.
Fan Installation Instructions
Instructions for installing fans:
160mm Fan Installation
- Diagram shows routing fan cables through the fan bracket before mounting. Text: "Please route the fan cables through the fan bracket first." ➡️
- Diagram shows the 160mm fan being mounted.
General Fan Installation
- Diagram shows routing fan cables through a designated cable hole before securing the fan bracket. Text: "Please route the fan cables through the cable hole first, then secure the fan bracket." ➡️
Side Water Cooling Installation Instructions
Diagrams illustrate the installation of a side-mounted water cooling radiator and fans.
- Illustrations show routing fan cables through the fan bracket first, followed by securing the bracket.
- A recommendation is provided for the orientation of water cooling tubes. Text: "It is recommended to install the water cooling tubes in this direction." ➡️
10 Module Location
Instructions for reconfiguring the front I/O module's position:
- Mode A: The case is configured for right-side placement of the I/O module. The diagram shows the I/O module on the right side.
- Mode B: The case is configured for left-side placement of the I/O module. The diagram shows the I/O module on the left side.
PSU Installation Instructions
Diagrams show the step-by-step process for installing the Power Supply Unit (PSU) into the case, including securing it with screws.
3.5-inch HDD Installation Instructions
Diagrams illustrate the installation of a 3.5-inch Hard Disk Drive (HDD) into the designated drive bay, using screws for mounting.
2.5-inch SSD Installation Instructions
Diagrams show the process of installing a 2.5-inch Solid State Drive (SSD) into the case's drive bay, secured with screws.
Graphics Card Installation Instructions
Instructions for installing a graphics card:
Installation Direction A
Diagram shows the vertical installation of a graphics card.
Installation Direction B
Diagram shows the horizontal installation of a graphics card. Text advises: "Please lay the case flat at a 90° angle for easier installation." ➡️
Note: The vertical graphic card and the PCI-E riser cable are not included in the package and must be purchased separately.
Motherboard Installation Instructions
Diagrams show the correct placement of the motherboard within the PC case.
Instruction: "Please install the motherboard with the rear panel connectors facing downward." ➡️
I/O Cable Connection Installation Instructions
Diagrams illustrate how to connect the front panel I/O cables, specifically USB-A and USB-C, to the motherboard's rear panel connectors.
Instruction: "Please connect the USB-A and USB-C cables to the rear panel connectors of the motherboard." ➡️
Cable Management Bracket Usage Instructions
Diagrams demonstrate the application of cable management brackets:
- Front and Rear Cable Management Bracket: Shows how these brackets are used for organizing cables at the front and rear of the case.
- Side Cable Management Bracket: Shows the placement and function of side-mounted cable management brackets.
Cable Management Bracket Position Adjustment
Diagrams illustrate how to adjust the positioning of the cable management brackets within the case for optimal cable routing.
Controlling Lighting Modes
Instructions for managing the RGB lighting effects:
- PWM Function: A note clarifies that for PWM functionality, the 4-pin PWM fan connector must be connected to a corresponding 4-pin header on the motherboard.
- Connector Identification: Diagrams identify various connectors, including 5V/3 Pin Addressable RGB connectors and fan speed control connectors.
- Mode 1: 20 Default Lighting Effects: Instructions state to connect the power cable to the PSU and short-press the RGB SW button to cycle through the 20 preset lighting effects.
- Mode 2: Motherboard Synchronization: To enable motherboard synchronization, use the provided adapter to connect to a compatible motherboard's 3-pin 5V Addressable RGB header. The lighting will then be controlled by the motherboard's software. The synchronization mode persists after PC restarts as long as the header is connected.
- Switching Modes: Guidance is provided on switching between modes: a short press of the RGB button cycles through default effects, while pressing and holding the RGB button for 6 seconds turns off the lighting.
Global Warranty Policy
Warranty Periods for COUGAR Gaming Devices:
- Product: COUGAR OmnyX Series / X
- Warranty: 1 Year for electrical components.
Contact Information:
- Official website: www.cougargaming.com
- COUGAR USA Technical Service: Tel: (833) 256-3778, Mail: rma@compucaseusa.com
Manufacturer: Compucase Enterprise Co., Ltd.
Manufacturing Location: Made in China
Serial Number Information: Details are provided on how to interpret serial numbers (e.g., S/N: H2504000001 for the main unit, S/N: DBE04REVI000001 for the revision) to determine warranty validity, with examples showing year codes (e.g., BE = 25 = 2025).
Home :: COUGAR Global - COUGAR
