User Guide for JENSEN models including: JC7DM Dash Mount 7 Inch Touchscreen Monitor with Wireless Apple CarPlay and Android, JC7DM, Dash Mount 7 Inch Touchscreen Monitor with Wireless Apple CarPlay and Android, Monitor with Wireless Apple CarPlay and Android, Apple CarPlay and Android, CarPlay and Android

110JC7DM

110JC7DM, Jensen JC7DM Dash Mount 7" Touchscreen, WWW.CRUTCHFIELD.COM

HNEWBERRY

Jensen JC7DM owner's manual

Jensen JC7DM 7" touchscreen monitor with wired or wireless Apple CarPlay and Android compatibility at Crutchfield


File Info : application/pdf, 8 Pages, 3.64MB

PDF preview unavailable. Download the PDF instead.

110JC7DM
JC7DM

QUICK START GUIDE
Dash Mount 7" Touchscreen Monitor with Wireless Apple CarPlay® and AndroidTM

Works with
Apple CarPlay

Compatible With
Android"' Phones

This Quick Start Guide gives you the basics to start using your JC7DM. Please visit https://www.jensenmobile.com. to download a complete owner's manual or call customer service at 1-888-921-4088 (Monday-Friday, 9AM-5PM EST).
Designed and Engineered in USA

Wiring Diagram - Inputs/Outputs

GPSANTENNA

Main Menu

Note: · ······· ······· ··· ····· ······· · · · · - - - - - - - -

[D) ~I

~

In main menu. press the desired icon to enter the corresponding mode: FM Transmitter/Apple CarPlay/ Android/BT Phone/BT Audio/USS/Settings.

SOURCES

FM l r,in, m iuer

U SB

98 .1 MH,
o,

A

Disconnected

rn ¢i ~
Ap plPL;rp l,iy Andro id

'*._ ·,

· ~~ cJ rum ru ~ miru m I

FM Transmitter

II II
fi· FM Transmitter

II

·OFF/ ON
--~

Transmit Freq uency

98.1 MHz

II

.. * [§1 ,) ({)

G) Main Menu (2) Current Mode Indicator

G

1

2

3

G) Keypad (D FM Transmitter On/Off

4

5

6

7

8

9

0

OK

12V POWER ADAPTER

USB INPUT

EXTERNAL MICROPHONE
Use to improve voice quaiity.

Audio Operation

Press the "Settings" icon on the main menu screen to adjust the Balance and Equalizer controls (16-Band Tone Control and 8 Presets EQ Settings).

':J EQ

S, '4 >) f 0

':) EQ

S, '4 >) f 0

\-/ 1-,

( CLl ss 1c Rock

Jazz

Electric

Pc )

< ' ' ' ' ' ' .1~,1ll - · -

·- ' -

'-

1 -

' -

·-- ' -

-

-

-·- -

-

-- -

-

Bala n,e

<

.;:

I

I >

~

~c;,=,,
{)

.':JJIJIJIJuJLLLIJ :

Rew t

·~

'" '" '" ···

~, ·'"

Re·, et

Installation
Before You Start · Avoid installing the unit where it would be subject to high temperatures from direct sunlight, dust,
dirt or excessive vibration.

SILICON COVER (Cover on the back)

WINDSHIELD / DASHBOARD MOUNT

Control Locations

1

2

3 4

The radio display features the following functions and displays:

01 POWER/MUTE 02 DIMMER

03 VOICE ACTIVATION BUTTON 04 INTERNAL MICROPHONE

USB Operation

From the main menu, touch the USB icon on the main screen.

··1 2

ff USB
Q
I
57 of 92

. * [

"'I
"?

,)

(>

Pau se

Win

Tee Grizzley

4

Win(Single) (Explicit)



I

:..:..x..:

00:02:05/00:04:51

EQ
1111111111111

3
· 4 · 5 · 6 ··7

01 Main Menu 02 Current Mode Indicator 03 List 04 Repeat 05 Random 06 Search 07 EQ 08 Track Up 09 Play/Pause 010 Track Down

10

9

8

Bluetooth Operation

Before using Bluetooth Before you can use a Bluetooth device to make hands-free calls or stream audio. it must be authenticated. This is also referred to as "pairing" a device.

Pairing a New Device The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner's manual for your device for more details. The device name is "JC7DM". The unit can be in any mode of operation when pairing is performed. On certain phones, pairing may need to be done more than once.

Connect

fl" BT Phone

The head unit will automatically connect to the last connected device when the connect feature is set to Auto connect On.

['J0 dddJn

If the connect feature is set to Auto Connect Off, the head unit

2

will not automatically connect to any device.

4

5

7

8

Bluetooth Phone

From the main menu. touch the Bluetooth on the screen.

0

Bluetooth icon will appear anytime a Bluetooth device is con-

+

(.

nected.

fl" BT Phone

. ... ~

,)

()

3 ...

6

9

I!

#

oJJ

<:x:J

(ii

. ~

,)

()

DPriaelsinsg···a······Nutomdbiseprlay keypad and dial a number.

['J0 dddJn
Dialing ..

Making and Ending a Call
l Press to connect a call, and press

to end a call.

Transferring Audio Press - to transfer andio between the head unit and mobile phone.

AAAAIPHONE
4006668800
t, S= !!!
f t BT Audio

-

.=_i-'J ,)

()

Streaming Audio Press  /I to play or pause the music. Press I  to skip to the previous track. Press  I to advance to the next track.

Q

Win
Tee Grizzley Win{Singl e) {Explicit)

I
57of92

II

I

00:02·06/00:04:51

EO
111111111111 1

Wired & Wireless CarPlay Operation
Wired connection 1. Connect an Apple CarPlay compatible device to this unit via USB. 2. Press the Apple CarPlay icon.
The Apple CarPlay home screen appears.
Wireless connection Before using Apple CarPlay wirelessly, turn on the Bluetooth/Wifi function on the Phone. 1. Press icon on the main menu; 2. Press " " to confirm to use wireless CarPlay; 3. Press " "icon to search phone device. The available devices appear on the list; 4. Find the desired device on the screen and press "Pair"; 5. A pass key will be displayed on the screen; 6. The same key appears on the iPhone, press "Pair" and then press "Allow" for the popups; 7. Press " " on the screen to confirm to connect; 8. Press "Use CarPlay" on the iPhone. The unit configures the connection then starts the application.
Tip: Press " ~ " icon. Displays CarPlay device list. This icon appears Only When CarPlay is connected and
two or more devices can be used as CarPlay Source.

Wired & Wireless Android Operation

Wired connection 1. Connect an Android compatible device to this unit via USB. 2. Press the Android icon.
The Android home screen appears.
Wireless connection Before using Android wirelessly, turn on the Bluetooth/Wifi function on the Android device.

h
I 0Maps
·Jensen
V

8
Waze
$
Setting s

0
Messages
EJ
Calendar

e
Phone
@
YT Music

1. Press icon on the main menu; 2. Press " " to confirm to use wireless Android;

[E

e@e·

.II I
12:35

3. Press " "icon to search phone device. The available devices appear on the list;

4. Find the desired device on the screen and press "Pair";

5. A pass key will be displayed on the screen;

6. The same key appears on the Android device, press "Pair" and then press "Allow" for the popups;

7. Press " " on the screen to confirm to connect;

The unit configures the connection then starts the application.

Tip: Press " " icon. Displays Android device list. This icon appears Only When Android is connected and

two or more devices can be used as Android Source.

General Operation
From the Main Menu screen, select Setup to access the Settings menu and select from categories represented by the icons on the right of the screen: General, Audio, Display, Others. Select the category, and adjust any of the available options using the touch screen.

i't Settings
Sync GPS Time Language Microphone Prog. Volume Right Hand Drive

[9 .. >) t ©

0

on IIIDIII

< > English

<?i
AUDIO

< > External

<"II

< > Off

DISPLAY

on IIIDIII

~ii
OT Htll':i

i't Settings
Source Level Control Equalizer Loudness

j .. >) t ©

··· 0

···

GENERAL

on IIIDIII

<?:

<"II
DISPLAY

~ii
OlHt ~)

Limited Three Year* Warranty
This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Jensen warrants this product to the original purchaser to be free from defects in material and workmanship for a period of three years from the date of the original purchase. Jensen agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed, or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period. What is covered? This warranty covers all defects in the material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair, or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.jensenmobile.com.
Warranty Coverage * Limited 3-year warranty. (Proof of purchase required) Jensen recommends professional installation of any electronics in your vehicle to ensure the best performance.
What to do? 1. Before you call for service, check the troubleshooting guide in your owner's manual. A slight adjustment of any custom controls may save you a service call. 2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center. 3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment. 4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods: · Call us toll-free at (888) 921-4088 (Monday-Friday, 9:00 am, to 5:00 pm, EST) · E-mail us at cs@jensenmobile.com Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company's negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental, or consequential damages.

FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
www.jensenmobile.com ©2023 Namsung America Inc. All rights reserved.
NSC0723-V01

Register your warranty
Scan to register, or visit: https://iensenmobile.com/register.html Upon registration you may also choose to be notified of product updates or special promotions.
Visit www.jensenmobile.com for detailed owner'smanuals on most products. If you need any assistance, please contact customer service at cs@iensenmobile.com or call 1-888-921-4088 M-F 9am - 5pm ET
Thank you for your purchase!



References

Adobe Acrobat Pro (32-bit) 23 Paper Capture Plug-in