DAEWOO KOC-8H4T Microwave Oven: Parts and Assembly Guide
Introduction
This document provides a comprehensive parts list and detailed disassembly and assembly instructions for the DAEWOO KOC-8H4T microwave oven. It is intended to guide users through the identification and handling of various components.
Parts List - Door Assembly
| REF NO. | PART CODE | PART NAME | DESCRIPTION | Q'TY |
|---|---|---|---|---|
| A01 | 3516601400 | DOOR-PLATE | SBHG-1A T0.7 | 1 |
| A02 | 3513101310 | HOOK | POM | 1 |
| A03 | 3515101310 | SPRING HOOK | HSW-3 | 1 |
| A04 | 3512209910 | FRAME DOOR | ABS SR0320 | 1 |
| A05 | 3511616300 | DECORATOR DOOR | STS430 T0.5 HL | 1 |
| A06 | 3517009500 | BARRIER-SCREEN *O | MIRROR T3.2 | 1 |
| A07 | 3510610600 | SUPPORTER BRACKEK GLASS | SBHG T0.8 | 1 |
| A08 | 7122401211 | SCREW TAPPING | T2S TRS 4X12 MFZN | 2 |
| A09 | 3512606700 | HANDLE DOOR | AL | 1 |
| A10 | 7001401211 | SCREW MACHINE | PAN M4XL12 MFZN | 2 |
| A11 | 3512301310 | GASKET DOOR | PP | 1 |
| A12 | 3515203600 | STOPPER HINGE *T AS | KOC-970T1S | 1 |
| A13 | 712140061 | SCREW TAPPING | T2S PAN 4X6 MFZN | 1 |
Disassembly Instructions - Door Assembly
- Remove the gasket door from the door plate.
- Remove screws from the door plate.
- Remove the door frame from the door plate.
- Remove screws from the door frame.
- Remove the handle from the door frame.
- Remove the decorator door from the door frame.
Parts List - Control Panel Assembly
| REF NO. | PART CODE | PART NAME | DESCRIPTION | Q'TY |
|---|---|---|---|---|
| B07 | 3516734500 | CONTROL-PANEL | ABS SG-076OD SG-175 | 1 |
| 3511616200 | DECORATOR C-PANEL | STS430 T0.5 HL | 1 | |
| 3516006400 | SPEICAL DOUBLE TAPE | KOC-8H4T7S | 1 | |
| 3515502500 | WINDOW DISPLAY | PMMA IF-850 | 1 | |
| 3516915000 | BUTTON FUNCTION-A | ABS SG-076OD SG-175 | 1 | |
| 3516915100 | BUTTON FUNCTION-B | ABS SG-076OD SG-175 | 1 | |
| B07 | 3513408900 | KNOB VOLUME | ABS SG-076OD SG-175 | 1 |
| B08 | 7122401211 | SCREW TAPPING | T2S TRS 4X12 MFZN | 4 |
| 7621301011 | SCREW TAPPING | T2 PAN 3X10 PW MFZN | 8 | |
| B10 | PKMPMSGG00 | PCB MAIN MANUAL AS | KOC-8H4T7S | 1 |
| B11 | PKBPMSGG00 | PCB BUTTON MANUAL AS | KOC-8H4T7S | 1 |
Disassembly Instructions - Control Panel Assembly
- Remove the screw which secures the control panel, push up two snap fits and draw forward the control panel.
- Remove four screws (B08) which secure the PCB Main ASS°ØY.
- Attach the Main PCB assembly (B10).
- Remove eight screws (B09) which secure the PCB Sub ASS°ØY.
- Attach the Sub PCB assembly (B11).
- Remove the Knob volume (B07) from the Sub PCB assembly.
- Remove ten buttons from the control panel.
- Remove Decorator control panel (B01) from the control panel.
- Remove Window display (B04) from the control panel.
- Reverse the above steps for reassembly.
Parts List - Heater Assembly
| REF NO. | PART CODE | PART NAME | DESCRIPTION | Q'TY |
|---|---|---|---|---|
| 1 | 3512805800 | HEATER MIRACLON | 230V 800W 270MM | 1 |
| 2 | 3512806900 | HEATER REFLECTOR | STS430 T0.5 | 1 |
| 3 | 7113400814 | SCREW TAPPING | T1 BIN 4X8 MFNI | 2 |
| 4 | 3511412400 | COVER HEATER *T | SA1D-80 T0.4 | 1 |
| 5 | 3510610500 | BRACKET COVER HEATER | SECC T0.5 | 1 |
| 6 | 7112401011 | SCREW TAPPING | T1 TRS 4*10 MFZN | 1 |
| 7 | 3512523600 | GUIDE AIR OUTLET | SBHG T0.5 | 1 |
| 8 | 7112401011 | SCREW TAPPING | T1 TRS 4*10 MFZN | 1 |
Disassembly Instructions - Heater Assembly
- Remove a screw (8) and pull out Guide air outlet (7).
- Remove screws (6) and pull out bracket cover heater (5).
- Pull out heater miraclon (1).
- Remove two screws (3).
- Pull out the heater reflector (2) from cover heater *T (4).
- Reverse the above steps for reassembly.
Parts List - Convection Assembly
| REF NO. | PART CODE | PART NAME | DESCRIPTION | Q'TY |
|---|---|---|---|---|
| 3514330 | MOTOR SHADED POLE | 230V 50HZ MW10CA-T03 | 1 | |
| 3507310 | HEATER QUARTZ | 115V 500W 240MM A | 2 | |
| 3503900 | INSULATOR HEATER *B | SBHG-1 T0.6 | 1 | |
| 711400811 | SCREW MACHINE | PAN 4X8 PW MFZN | 2 | |
| 711400814 | SCREW TAPPING | T1 BIN 4X8 MFNI | 3 | |
| 711104011 | WASHER PLAIN | PW-1-4 MFZN | 1 | |
| 711800700 | FAN CONVECTION | SA1D-80 T0.5 | 1 | |
| 7117W40X1 | SPECIAL SCREW | NUT FLANGE M4 MFZN | 1 | |
| 351800900 | FAN | PBT | 1 | |
| 351782600 | HARNESS CONVECTION *A | KOC-8H5T7S | 1 | |
| 351782610 | HARNESS CONVECTION *B | KOC-8H5T7S | 1 | |
| 711704600 | RING C | CR-5 SK5 | 1 | |
| 711400611 | SCREW TAPPING | T2S TRS 4X6 MFZN | 4 | |
| 351412600 | COVER *B | SBHG-3 T0.4 | 1 | |
| 351410500 | COVER MOTOR *B | SA1D-80 T0.5 | 1 | |
| 711400811 | SCREW TAPTITE | TT3 TRS 4X8 MFZN | 1 | |
| 711401011 | SCREW TAPPING | T1 TRS 4*10 MFZN | 1 |
Disassembly Instructions - Convection Assembly
- Remove screw (17) and pull out Cover motor *B (16).
- Remove screw (18) and pull out Cover *B (15).
- Disconnect Harness convection-A (11) and Harness convection-B (12).
- Remove screws (14) and then pull out the Rear heater assembly.
- Pull out the Fan convection (8).
- Reverse the above steps for reassembly.
Exploded View Diagram
The exploded view diagram (VUE E) illustrates the overall assembly of the DAEWOO KOC-8H4T microwave oven. It shows how various components, such as the door, control panel, heater elements, and convection fan, are interconnected and fitted together. Each part is typically assigned a reference number that corresponds to the parts lists and instructions provided in this document, aiding in identification during disassembly and reassembly processes.
