Waterproof Wireless Speaker User's Manual

Introduction

Thank you for choosing the A1 as your source for entertainment. You can use this item with iPads, iPhones, iPods, and many types of smartphones to stream music and enjoy hands-free calling. To get the best results when using the device, please read this manual first before using.

Features

• Volume and song control directly on speaker unit
• Stunning sound clarity
• Ultra portable design
• Great for parties, indoor and outdoor
• Allows you to make and answer phone calls

Product Diagram and Controls

The A1 speaker features the following controls and indicators:

• 1. Next/Volume+: Press to advance to the next track or hold to increase volume.
• 2. ON/OFF/Play/Pause/Phone: Press and hold for 2 seconds to power on/off. Press once to play/pause music. Press once to answer/end calls. Press twice to redial the last number. Press and hold for 2 seconds to reject a call.
• 3. Previous/Volume -: Press to go to the previous track or hold to decrease volume.
• 4. Blue LED (Bluetooth): Indicates Bluetooth connection status. Flashes quickly when pairing, solid when connected, flashes slowly in Aux-In mode.
• 5. Red LED (Charging): Illuminates while charging and turns off when fully charged.
• 6. MIC: Built-in microphone for hands-free calls.
• 7. Micro USB Charging/AUX in Port: For charging the device and connecting via a 3.5mm audio cable.

Included in the Box

• 1 x Speaker
• 1 x USB Micro Charging Cable
• 1 x 3.5 mm Micro-USB Cable
• 1 x User Manual

Specifications

Operation

Powering On/Off

Press and hold the "ON/OFF" button (2) for 2 seconds to power the unit on. The Blue LED (4) will start to flash quickly. If an AUX cable is connected, the Blue LED will flash slowly, indicating Aux-In mode. Press and hold the "ON/OFF" button (2) for 2 seconds to power off.

Bluetooth Mode

Pairing

The unit automatically enters "Pairing Mode" when powered on. On your Bluetooth device, go to settings and search for "A1". Once paired and connected, the unit will automatically reconnect when powered on and the device is in range. Note: Bluetooth Timeout is 10 minutes.

Streaming Music

Press the [Play/Pause] button (2) to start playing music. Press and hold the [Next/Volume+] button (1) for 2 seconds to play the next track. Press and hold the [Previous/Volume -] button (3) for 2 seconds to play the previous track. Press the [Volume Up] or [Volume Down] buttons (1 or 3) for volume control.

Making and Receiving Phone Calls

When connected and paired to your device, the unit allows hands-free calls via its built-in microphone (6). Press the [Phone] button (2) to accept a call. To end a call, press the [Phone] button (2). To place a call, dial the number or select a contact from your device. To reject a call, press and hold the [Phone] button (2) for 2 seconds. Press the [Phone] button (2) twice to redial the last dialed number.

Aux-In Mode

Plug the supplied 3.5 mm audio cable into the unit's AUX in port (7) and connect the other end to your device. The Blue LED (4) will flash slowly, indicating "Aux" mode. Music playback and volume control are managed by your connected device.

Charging

Connect the USB Micro Charging Cable to the unit's Micro USB port (7) and plug into any USB charger. If the unit is completely discharged, it will take approximately 4 hours to fully charge. The Red LED (5) will illuminate during charging and turn off when charging is complete. A beep will sound when the battery is low and requires recharging.

LED Status

Troubleshooting

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.