User Manual for Allegra models including: T21, T22, T24, T25, T21 Wall Mounted Touch Panel, Wall Mounted Touch Panel, Touch Panel, Panel
Juhtimispaneel SKYDANCE T21 (4 tsooni) patareitoide must IP20
SkyDance LED Group Control RGB CCT (FullColor) elemes fali LED szabályzó panel, T25 White - Ár: 12 690 Ft - ANRO
Wall Mounted Touch Panel Model No.: T21,T22,T24,T25 4 Zone/1-5 color/Glass touch panel/Color slide/Wireless remote 30m distance/AAA x 2 battery Mechanical Structures and Installations Installation rack Battery compartments T21,T22,T24,T25 Wall Mounted Touch Panel 86.00 mm 20.50 mm 61.00 mm 86.00 mm T21 4 Zone dimming T22 4 Zone CCT T24 4 Zone RGB/RGBW T25 4 Zone RGB+CCT Features Touch panel 4 zone 1-5 color RF remote. Each zone can remote control multiple RF 2.4G LED controllers. Ultra sensitive high strength glass touch panel with touch color slide in the middle. Smooth and accurate color adjustment by touching the color slide. Touch keys with chord tones and LED indicator. Free installation, no wiring, removable. AAA x 2 battery powered. White & Black glass panel available. Technical Parameters LVD RED Input and Output Output signal Working voltage Working current Standby current Standby time Remote distance RF(2.4GHz) 3VDC(AAA x 2) 5mA(Without tune) 20mA(with tune) 20A 1 year 30m (Barrier-free space) Environment Operation temperature Case temperature (Max.) IP rating User Manual Ver 1.1.0 Ta: -30 OC ~ +55 OC T c: +65OC IP20 Safety and EMC EMC standard (EMC) Safety standard(LVD) Radio Equipment(RED) Certification ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 ETSI EN 300 328 V2.2.2 CE,EMC,LVD,RED Warranty Warranty Weight Net weight Gross weight 5 years 156g 192g Installation diagram: 61.00 mm Typical base as below: Uninstall Touch panel Baseplate Base European style 86 size To fix the panel, two options are offered for selection: Option 1: fix it on the wall with two screws. Option 2: adhere it to the wall with paster. Match with RF LED controller (two match ways) End user can choose the suitable match/delete ways. Two options are offered for selection: Use the controller's Match key Match: Short press match key, immediately press zone key of the touch panel. The LED indicator fast flash a few times means match is successful. Delete: Press and hold match key for 5s to delete all match. The LED indicator fast flash a few times means all matched remotes were deleted. Use Power Restart Match: Switch off the power of the receiver, then switch on power, repeat again. Immediately short press zone key 3 times on the touch panel. The light blinks 3 times means match is successful. DS. welietcteh: off the power of the receiver, then switch on power, repeat again. Immediately short press zone key 5 times on the touch panel. The light blinks 5 times means all matched remotes were deleted. Page 1 Key function T21 Single color panel Turn on/off all zone light. Power ZONE POWER Brightness slide. ZONE SCENE Short press recall scene. Long press 2s to save the current state into 1/2/3. Scene Scene Scene ZONE SCENE Zone Zone Zone Zone Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light. ZONE SCENE Short press multiple zone key fastly, will select multiple zone synchronously. 4 zone control seperately or synchronously, each zone could control multiple receivers. T22 Dual color panel ZONE ZONE ZONE ZONE POWER BRIGHT BRIGHT S SCENE Turn on/off all zone light. Power Color temperature. + Brightness +,10 levels. Brightness -,10 levels. S Short press recall scene. Long press 2s to save the current state into the scene. SCENE Zone Zone Zone Zone Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light. Short press multiple zone key fastly, will select multiple zone synchronously. 4 zone control seperately or synchronously, each zone could control multiple receivers. T24 RGBW panel Zone Zone Zone Zone Power Mode Brt/Speed W White Turn on/off all zone light. Power Color slide. Short press play 10 built-in mode, long press run mode-cycle. Mode Adjust dynamic mode speed or static color brightness,10 levels. Brt/Speed W Short press turn on/off W channel, long press adjust W channel brightness. White Zone Zone Zone Zone Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light. Short press multiple zone key fastly, will select multiple zone synchronously. 4 zone control seperately or synchronously, each zone could control multiple receivers. T21,T22,T24,T25 Wall Mounted Touch Panel T25 RGB+CCT panel Turn on/off all zone light. 1 ZONE Power POWER RGB color / Color temperature slide. 2 M Switch between RGB color / Color temperature slide. ZONE MODE SWITCH 3 Short press play 10 built-in mode, long press run mode-cycle. Mode ZONE BRT/SPEED Adjust dynamic mode speed or static color brightness,10 levels. Brt/Speed 4 ZONE SWITCH Zone Zone Zone Zone Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light. Short press multiple zone key fastly, will select multiple zone synchronously. 4 zone control seperately or synchronously, each zone could control multiple receivers. Note: After touch power key to turn off light, long press power key for 5 seconds will turn on or turn off tone. Safety information 1. Read all instructions carefully before you begin this installation. 2. When installing batter y, pay attention to the batter y positive and negative polarity. A long time without the remote control, remove the batter y. When remote distance becomes smaller and insensitive, replace the batter y. 3. If no response from the receiver, please re-match the remote. 4. Gently handle remote, beware of falling. 5. For indoor and dr y location use only. User Manual Ver 1.1.0 Page 2Corel PDF Engine Version 16.1.0.843 CorelDRAW X6