DRONE 3-IN-1

CAUTIONS:

1. Safety Information
   This product is a high precision device and integrates mechanics, electronics, aero-mechanics and HF transmit etc., and only accurate assembly and debugging can avoid any possible accident. The owner of the device should operate in a safe way and any personal injury or property loss caused by inappropriate operation shall be beyond Jupiter Creations' responsibilities, as Jupiter Creations will not control, assemble and operate the device.
   This product is applicable to the population over 14 years old, with certain model operation experience.
   The airdrome should be locally legal for model operation.
   Jupiter Creations will not take any responsibility related to safety in terms of operation, use and control upon the sale of the product.
   Please contact the local specified distributor entrusted by Jupiter Creations for any problem to operation and maintenance.
2. Cautions
   The drone is a high-risk product, please keep it away from the crowd while playing. It might cause damage of the drone or personal injury by improper assembly, poor control or unfamiliar operation, please be cautious.
   
   • Keep away from obstacles and the crowd. The drone has uncertain flying speed and various states, which bring about potential danger. Keep away from the crowd, high building and high-voltage wire etc., and avoid severe weather to ensure the safety of the operator, surrounding crowd and property.
   • Keep away from humid conditions. The drone consists of many precise electronic components and mechanical elements which should be kept away from humid conditions or water in case of malfunction.
   • Safe operation. Pay attention to the operator's state and operation skill, and avoid fatigue operation with lassitude or improper operation which would bring about possible danger.
   • Keep away from the parts of high-speed revolution. The operator, surrounding crowd and any objects should keep away from the components of high-speed revolution in case of danger or damage.
   • Keep away from heat source. The drone is made of metal, fiber, plastic and electronic elements etc., which should be kept away from heat in case of deformation or damage due to high temperature. This product is using Li-Po battery. Li-Po battery differs from the common batteries, which contains the chemical materials by means of thin tinfoil. This design can reduce the weight of the battery but also make it more brittle to rough or improper operation. Like other batteries, any incorrect operation would cause fire or explosion.
   • Do not charge the battery when putting it inside the drone, which might cause fire and damage.
   • Please keep the drone with 50% power if you do not play it for a long time, to extend the battery life. In that case, charging for the next time needs only half time for a full charging.
   • Please use the original charger.
   • Do not charge the battery on the carpet to avoid fire.
   • Please recharge the Li-po battery if it is stored more than 3 months for the sake of normal lifetime.

CONTENTS AND SPECIFICATIONS:

Product Size: DRONE: 9x9x3 cm; GLIDER: 23.5x14x4.5 cm; SWITCHING: 12.5x11.5x5.5 cm

Product Battery: Li-Polymer 3.7V 300 mAh

Flight duration: DRONE MODE About 7 minutes; GLIDER MODE About 10 minutes; SWITCHING MODE About 8 minutes

Remote Battery: 4 x 1.5v AAA

Remote control distance: 50m

REMOTE CONTROL:

• ① Switch
• ② Left stick (Accelerator)
• ③ Right Stick
• ④ Drone mode
• ⑤ Glider mode.
• ⑥ Airship mode
• ⑦ Speed control button
• ⑧ Forward and backward trimming
• ⑨ Left and right fly fine tuning
• ⑩ HEADLESS MODE (Drone mode only)
• ⑪ 360° Stunt (Drone mode only)
• ⑫ Light switch

MODE SWITCHING:

1. Drone flight mode: Default upon aircraft power-on. Drone indicator light is green.
2. Gliding flight mode: Press the gliding mode button on the remote control. The drone indicator light turns red, and the aircraft switches to gliding mode.

PREPARING TO FLY:

1. Match the 2.4G frequency: Turn on the drone, place it on a flat surface. The drone signal light will flicker. Turn on the remote control, then push the left stick forward and backward.
2. Reset operation: When the frequency is matched, pull back both the left and right joysticks and hold for at least three seconds. The aircraft's indicator light will flash and then remain constantly lit, indicating a successful reset.

REMOTE BATTERY SETTING:

Place batteries according to (+/-) markings.

DRONE BATTERY CHARGING:

Remove the battery

Power socket

Charging batteries

Install battery

Take out the aircraft battery, then connect the charging head of the USB charging cable to the battery charging socket, and connect the USB terminal to the power supply for charging.

Pay attention to the following when charging:

• Do not leave the charged battery in a hot place, such as an open flame or electric heater, otherwise it may be damaged or explode.
• Do not immerse the battery in water. The battery should be stored in a dry place.
• Do not disassemble the battery.
• Do not leave when charging.

ASSEMBLY OF GLIDER AND HOVERCRAFT:

1. GLIDER ASSEMBLY
   Diagram showing drone in drone mode, then attaching glider wings.
   Diagram showing the back two spirals turning up 45 degrees, then attaching to the drone with glider wings.
2. HOVERCRAFT ASSEMBLY
   Diagram showing drone in drone mode, then attaching hovercraft base.
   Diagram showing the back two spirals turning up 90 degrees, then attaching to the drone with hovercraft base.

CONTROLLING YOUR VEHICLE:

1. DRONE MODE
   • Flies up; Flies down
   • Turn left; Turn right
   • Forward; backward
   • Left side fly; Right side fly

   Diagrams illustrating drone controls for flying up/down, turning left/right, forward/backward, and side-to-side movement.

2. GLIDER MODE
   • Flies up; Flies down
   • Turn left; Turn right
   • Forward; backward

   Diagrams illustrating glider controls for flying up/down, turning left/right, and forward/backward movement.

3. HOVERCRAFT MODE

   Diagrams illustrating hovercraft controls for forward movement.

4. 360° STUNT FLIP FUNCTION (DRONE MODE ONLY):
   When familiar with basic actions, explore stunt actions. Fly the drone to a height of above 3 meters above the ground, press the Stunt Flip Button on the remote control, and then push the right joystick to the farthest position of Front/Back/Left/Right. The drone will execute the Front/Back/Left/Right stunt flip function.
   Diagram showing drone performing a stunt flip.
5. HEADLESS MODE:
   When headless mode is on, the drone uses the remote control as a reference for direction. Push forward on the right stick, the drone flies away; push backward, the drone flies back.
   Diagram illustrating the concept of headless mode.
   Flying direction setting: Place the drone directly in front of you, point the remote towards the back of the drone, then press one-key takeoff.
   Press the right joystick of the remote control to make a "Bi" sound; the aircraft lights flash quickly to enter headless mode. Press the remote button again to make a "flute" sound and exit headless mode.
6. LIGHT SWITCH
   Press the light button on the remote control to turn on the light effects on the aircraft.
   Diagram showing the light switch button.
7. SPEED CHANGE
   Press the left joystick down to adjust the speed for forward, backward, left, and right steering. The speed has three gears: default is first gear. Press "di" for two sounds for the second gear, then press "di, di" for three sounds for the third gear. Pressing "di" again returns to the first gear.
   Diagram showing speed control indicator.

FINE TUNE YOUR DRONE:

After taking off, if the drone body inclines backward, press the forward micro-adjustment button.

After taking off, if the drone body inclines to the right side, press the left micro-adjustment button.

After taking off, if the drone body inclines to the left side, press the right micro-adjustment button.

After taking off, if the drone body inclines forward, press the backward micro-adjustment button.

NOTE: Tidy the power line of the battery when under the drone mode to keep stable flight as the following figure shows.

Diagram showing proper battery power line management for stable flight.

Diagram showing a checkmark symbol.

FOR MORE DETAILED INSTALLATION AND CONTROL INSTRUCTIONS, PLEASE SCAN THE QR CODE.

QR Code image.