Instructions for ffe models including: 0044119, TalentumTT2 Diffuser Replacement, TalentumTT2, Diffuser Replacement

TalentumTT2 Diffuser Replacement - FFE UK

5 days ago — The diffuser assembly is held in the Shroud with magnets. 2. Insert a screwdriver (or similar) in the front of the Calibration Shroud and release the ...

TalentumTT2 Diffuser Replacement User Guide (English)

TalentumTT2 - FFE UK

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 3 Pages, 210.06KB

TalentumTT2 Diffuser Replacement
EN Document No: 0044119
www.ffeuk.com

Procedure:
The Calibration Shroud has a light diffuser fitted. The diffuser can be replaced simply by following the instructions below.
1. The diffuser assembly is held in the Shroud with magnets. 2. Insert a screwdriver (or similar) in the front of the Calibration Shroud and release the diffuser. 3. Remove the old diffuser from the Shroud. 4. Insert the new diffuser into the Shroud. 5. Ensure the new diffuser is placed correctly within the Shroud and, if necessary, adjust its
position until it fits securely to the magnetic mounting points.
You will need:
1x2mm Allen key



References

• Home - FFE UK