User Manual for ZOTAC models including: CI343 ZBOX edge Barebone, CI343, ZBOX edge Barebone, edge Barebone, Barebone
Zotac ZBOX edge CI343 (ZBOX-CI343-BE) | Porównanie cen Cenowarka Polska
Zotac ZBOX edge CI343 (ZBOX-CI343-BE) starting from £ 295.20 (2024) | Price Comparison Skinflint UK
File Info : application/pdf, 18 Pages, 4.04MB
DocumentDocumentZOTAC ZBOX User's Manual ZOTAC ZBOX No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ZOTAC. Products and corporate names mentioned in this manual may be registered trademarks or copyrights of their respective companies, and are used for identification purposes only. All trademarks are the property of their respective owners. Every effort has been made to ensure that the contents of this manual are correct and up to date. However, the manufacturer makes no guarantee regarding the accuracy of its contents, and reserves the right to make changes without prior notice. CAUTION: Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. 1 ZOTAC ZBOX Table of Contents Product specifications ----------------------------------------------------------------------------------------3 Safety information ----------------------------------------------------------------------------------------------4 Setting up your system-------------------------------------------------------------------------------------4 Care during use ----------------------------------------------------------------------------------------------4 Welcome -----------------------------------------------------------------------------------------------------------5 Package contents -------------------------------------------------------------------------------------------5 Getting to know your ZOTAC ZBOX ----------------------------------------------------------------------6 Front view -----------------------------------------------------------------------------------------------------6 Rear view ------------------------------------------------------------------------------------------------------7 Customizing the ZOTAC ZBOX ----------------------------------------------------------------------------8 Installing a memory module-------------------------------------------------------------------------------9 Removing the memory module --------------------------------------------------------------------------10 Installing M.2 PCIe x4 / SATA SSD module-----------------------------------------------------------11 Setting up your ZOTAC ZBOX ------------------------------------------------------------------------------12 Positioning the ZOTAC ZBOX ------------------------------------------------------------------------------14 Mounting the ZOTAC ZBOX to an LCD monitor ----------------------------------------------------14 Installing drivers and software -----------------------------------------------------------------------------16 Using your ZOTAC ZBOX ------------------------------------------------------------------------------------16 Configuring a wireless connection ----------------------------------------------------------------------16 Configuring audio output-----------------------------------------------------------------------------------16 2 Product specifications Processor · Intel Alder Lake N100 (quad core, 0.8 GHz, up to 3.4 GHz) Onboard graphics · Intel UHD Graphics · HDMI 2.0 (max resolution: 4096×2160 @60Hz) · DP 1.4 (max resolution: 4096×2160 @60Hz) · DP output via USB-C (max 3 output) Memory support · 1x DDR5-4800 SODIMM Slots · Up to 16 GB of memory USB ports · 1x USB 3.1 Type-C port · 2x USB 3.1 ports Storage support · 1x M.2 PCIe 3.0 x4 / SATA SSD slot (22/42, 22/80) · 1x micro SDHC/SDXC card reader Network support · Dual Gigabit (10/100/1000Mbps) LAN · IEEE 802.3 compatible Wi-Fi support · WiFi 6 · Bluetooth 5.2 Onboard Audio · Digital 8 Channel Audio (LPCM/bitstream via HDMI) · Analog audio combo (CTIA) for headphone output/Microphone input Operating System support · Windows 11 Power · 19V/40W Power Supply Product Dimensions · 147.2mm x 147.2mm x 32.1mm ZOTAC ZBOX 3 ZOTAC ZBOX Safety information Your ZOTAC ZBOX is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system Read and follow all instructions in the documentation before operating your system. Do not use this product near water or a heat source such as a radiator. Set up the system on a stable surface with the provided stand. Never use the system alone without the stand. Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure you leave plenty of space around the system for ventilation. Never insert objects of any kind into the ventilation openings. Use this product in environments with ambient temperatures between 0 and 35. Care during use Do not walk on the power cord or allow anything to rest on it. Do not spill water or any other liquids on your system. When the system is turned off, a small amount of electrical current still flows. Always unplug all power, modem, and network cables from the power outlets before cleaning the system. If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer. ¾ The power cord or plug is damaged. ¾ Liquid has been spilled into the system. ¾ The system does not function properly even if you follow the operating instructions. ¾ The system was dropped or the cabinet is damaged. ¾ The system performance changes. 4 ZOTAC ZBOX Welcome Congratulations on your purchase of the ZOTAC ZBOX. The following illustration displays the package contents of your new ZOTAC ZBOX. If any of the below items are damaged or missing, contact your retailer. Package contents · 1 x ZOTAC ZBOX · 2 x VESA mount bracket (w/ screws) · 1 x AC Adapter · 1 x Power Cord · 1 x Antenna · 1 x Quick Start Guide 5 ZOTAC ZBOX Getting to know your ZOTAC ZBOX Front view 4 1 2 3 5 Refer to the diagram below to identify the components on the front of the ZBOX. 1. Power button The power button turns the system ON and OFF. 2. MicroSD memory card slot The built-in memory card reader supports Micro SDHC/SDXC cards to expand the storage capabilities of the ZOTAC ZBOX. 3. USB 3.1 Type-C port The USB 3.1 type-C port supports the SuperSpeed USB 3.1 devices. Use this port for USB 3.1 devices for maximum performance with USB 3.1 compatible devices. It supports DisplayPort via USB-C to DisplayPort cable to broadcast high-definition video (cable not included). 4. USB 3.1 port The USB 3.1 port supports the SuperSpeed USB 3.1 devices and is backwards compatible with USB 3.0/2.0/1.1 devices. Use this port for USB 3.1 devices for maximum performance with USB 3.1 compatible devices. 5. Combo Headphone/Microphone jack (3.5mm) The combo headphone/microphone jack (3.5mm) is used to connect the system's audio out signal to amplified speakers, 3-pole headphones or 4-pole CTIA headphones. Note: The combo headphone/microphone jack does not support the traditional microphone. 6 Rear view 2 2 1 6 3 4 5 ZOTAC ZBOX Refer to the diagram below to identify the components on the back of the system. 1. WiFi antenna connector The WiFi antenna connector supports the included WiFi antenna. 2. Ethernet ports The eight-pin RJ-45 LAN port supports standard Ethernet cable for connections to local area networks (LAN) with speeds of 10/100/1000Mbps. 3. USB 3.1 port The USB 3.1 port supports the SuperSpeed USB 3.1 devices and is backwards compatible with USB 3.0/2.0/1.1 devices. Use this port for USB 3.1 devices for maximum performance with USB 3.1 compatible devices. 4. DisplayPort DisplayPort supports both external (box-to-box) and internal (laptop LCD panel) display connections. 5. HDMI port The HDMI (High Definition Multimedia Interface) port supports a UHD device such as an LCD TV or monitor to allow viewing on a larger external display. 6. Power input (DC19V) The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the PC. To prevent damage to the PC, always use the supplied power adapter. The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body. 7 ZOTAC ZBOX Customizing the ZOTAC ZBOX Before installing hardware, please follow the instructions below to remove the cover of your ZOTAC ZBOX . 1. Loosen the 4 screws securing the bottom cover. 2. Remove the bottom cover. 8 ZOTAC ZBOX Installing a memory module 1. Locate the SO-DIMM memory slots and insert a SO-DIMM memory module into the slot at a 45 degree angle. 2. Gently press down on the memory module until it locks into place by the arms of the memory slot. 9 ZOTAC ZBOX Removing the memory module 1. Locate the SO-DIMM memory slot and gently press the two arms securing the memory module outwards, as shown in the image below, to release the memory module. 2. Remove the memory module from the slot at a 45-degree angle. 10 Installing M.2 PCIe x4 / SATA SSD module 1. Locate the M.2 SSD slot and remove the screw. ZOTAC ZBOX 2. Attach the screw to the M.2 SSD module, and insert the M.2 SSD module into the slot. 3. Install the screw on board. Note: PLUS / Windows models include SSD pre-installed. 11 ZOTAC ZBOX Setting up your ZOTAC ZBOX Please connect your peripherals before using your ZOTAC ZBOX 1 232 4 56 1 2 3 4 6 5 1. Connecting the WiFi antenna Connect the WiFi antenna to the WiFi antenna connector. 2. Connecting to a network device Connect one end of a network cable to the LAN port on the system rear panel and the other end to a network hub, switch or router. 3. Connecting to USB 3.1 devices Connect USB 3.1 devices such as external hard drives, SSDs and flash drives to the USB 3.1 port on the system rear panel. 12 4. Connecting a DisplayPort display Connect the DisplayPort connector to the DP port of the monitor or display. ZOTAC ZBOX 5. Connecting to an HDMI display Connect one end of an HDMI cable to an HDTV or monitor, and the other end to the HDMI port on the system rear panel. 6. Connecting the power adapter and turning on the ZBOX Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press the power switch on the front panel to turn on the system. When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the AC outlet to conserve power. 13 ZOTAC ZBOX Positioning the ZOTAC ZBOX · Do not position the ZOTAC ZBOX where the ventilation holes are covered. To guarantee proper use, leave 4 inches (10 cm) of spacing in front of the ventilation holes. · ZOTAC ZBOX mini-PC systems provide ample connectivity in a tiny form factor, please choose connectors and cables in appropriate sizes to avoid interference. Mounting the ZOTAC ZBOX to an LCD monitor You can attach your ZOTAC ZBOX to the back of a VESA75/100 compliant monitor. 1. Secure the VESA mount brackets to the bottom cover using 4 screws. Disclaimer: ZOTAC cannot be held liable for damages resulting from an improper installation. 2. Install the VESA mount attachment pegs to the LCD monitor. 14 ZOTAC ZBOX 3. Align the ZOTAC ZBOX mounting holes to the VESA mount attachment pegs, and gently press down to secure the ZBOX to the mount. 4. Connect the ZOTAC ZBOX to your LCD monitor with an HDMI/DP cable. 15 ZOTAC ZBOX Installing drivers and software The ZOTAC ZBOX barebone version does not ship with an operating system preinstalled and driver. The user should download the devices driver from ZOTAC website. Using your ZOTAC ZBOX Configuring a wireless connection Please follow the instructions below to connect to a wireless network: 1. Click the icon on the right of wireless network icon 2. Select the wireless network you want to connect to from the list. Note 1: For security concerns, Do NOT connect to an unsecured network, otherwise, the transmitted information without encryption might be visible to others. Configuring audio output Follow the steps below to enable audio output when connecting the ZOTAC ZBOX to a TV or receiver via DP/ HDMI adapter. 1. Click the audio icon in the notification area. 2. Click the icon to manage audio devices. 3. Under Volume devices, click the display device that corresponds with your audio compatible display. Note 2: Enter the network security key if necessary. 16Adobe PDF Library 16.0.7 Adobe InDesign 17.2 (Windows)