[Holtek Logo]

BP45F0102 EOL Notification

EOL Notification

Holtek hereby formally gives End Of Life (EOL) notification that the BP45F0102 will be phased out of production with a latest purchase date of February 07, 2026.

The following shows the phase out schedule for the BP45F0102 and the cross references between the phased out device and the replacement device.

Last time buy date: February 07, 2026
Order placement deadline
Production stops: May 07, 2026

Cease production
Last delivery
Product reaches end of life status

Suggested replacement device: N/A
MOQ (Minimum order quantity): 25 wafers / lot
The ordered quantity should be in units corresponding to multiples of 25 wafers / lot.

General Information

This EOL notification announces the cessation of manufacture of the devices mentioned herein. The process of product discontinuation will be implemented in accordance with Holtek's product EOL procedure. The device EOL information is supplied prior to cessation of manufacture to enable related customers to make the necessary adjustments to their present and future purchasing plans. Users of these devices should review this material carefully and ensure that final purchases are made within the schedule as defined in the following terms and conditions.

Last Purchase Date

This is the final date at which orders will be accepted for deliveries of the mentioned devices. After this date Holtek cannot enter into negotiations regarding the purchase of these phased out devices.

Production Stops

After this specified date no more devices will be manufactured and last deliveries made. At this point the device can be said to have reached their end of life status.

Suggested Replacement Device

The alternative devices are the recommended replacement devices for the phased-out devices. The suggested devices should functionally replace the original device however this is offered as reference information only. Holtek offers no guarantee that the suggested replacement device will have exactly the same form, function or specification of the phased-out device.

Device Pricing

The subject of pricing for the specified devices under notice of phase-out is one that must be discussed with the Holtek Sales Department. Quotations for devices will depend on several factors and can only be given upon individual requests.

Limited Warranty

All devices under notice of phase-out shall be subject to the Holtek Standard Limited Warranty.

Phased-out Device Future Manufacture

Holtek reserves the right to re-introduce at any time in the future the manufacture of devices that may have gone through the full phase-out procedure. All new re-introductions of previously phased-out devices will be announced on the Holtek website.

	Holtek HT6221/HT6222 End of Life (EOL) Notification and Replacement Guide Official End of Life (EOL) notification from Holtek for the HT6221 and HT6222 devices, detailing the phase-out schedule, last purchase dates, and suggested replacement devices (HT6221A/HT6222A).
	Holtek HT66F317 End of Life Notification and Phase-Out Schedule Official notification from Holtek regarding the End of Life (EOL) for the HT66F317 device, including phase-out schedule, last purchase date, production stops, and general information for customers.
	Holtek HT79171 10QFN End of Life Notification Official End of Life (EOL) notification from Holtek for the HT79171 10-pin QFN package type, detailing the phase-out schedule, last purchase date, production stops, and suggested replacement information.
	Holtek HT79181 End of Life (EOL) Notification and Production Phase-Out Schedule Official End of Life (EOL) notification from Holtek for the HT79181 device, detailing the production phase-out schedule, last purchase date, production stops, and information on suggested replacement devices.
	Holtek BC66F2332 Easy DEV User's Guide: Development and Programming Comprehensive user guide for the Holtek BC66F2332 Easy DEV board, covering setup, on-chip debugging (OCDS) with HT-IDE3000, and in-circuit programming (ICP) with HOPE3000. Includes pin assignments and schematics.
	Jumper Configuration Guide for HOLTEK CADPSOP28B Series Provides detailed jumper selection settings for HOLTEK CADPSOP28B series ICs, including models like CADPSOP28A, HT46R46E, HT46R47E, HT45R04E, HT46R48E, and HT46R49E. Explains jumper configurations for 'short' and 'open' states.
	Holtek Recommended Footprints for QFP, LQFP, TQFP Series User Guide Detailed footprint recommendations and specifications for Holtek's QFP, LQFP, and TQFP series semiconductor packages, including dimensions and pin configurations for PCB layout.
	HT-IDE3000 User's Guide: A Comprehensive Guide to Holtek's Integrated Development Environment Explore the HT-IDE3000 User's Guide for detailed information on Holtek's Integrated Development Environment, covering installation, quick start, menu options, debugging, simulation, and programming.