AZZA PHOTON USER MANUAL
Specifications
| Model | PHOTON |
| Model Name | PHOTON |
| Model Number | CSAZ-225K02 |
General Specifications
| Type | ATX Mid Tower (Support EATX) |
| Color | Black/Black(interior) |
| Side Panel Window | Left side panel: Tempered glass |
| Max CPU Cooler Height | Up to 175mm |
| Max Video Card Length | Up to 400mm long video card |
| Power Supply | Not included |
| Motherboard Compatibility | ATX, Micro ATX, ITX, EATX<300MM |
Expansion
| External 5.25" Drive Bays | 0 |
| Internal 2.5" Drive Bays | Up to 4 |
| Internal 3.5" Drive Bays | Up to 2 |
| Expansion Slots | 7 |
| Top ports | Power Button / LED Button / HD Audio Combo / USB3.0 x 2 / Type-C x 1 |
Physical Specifications
| Case Dimension (HxWxD) | 475x225x475mm / 18.7x8.8x18.7 inches |
| Weight | Kg /lbs |
Features
- Tempered Glass Side Window: High-quality tempered glass side window allows for clear visuals to inner components.
- Addressable RGB Light Effects: ARGB fans are controlled using the LED button. All addressable RGB devices can sync with the motherboard, allowing the motherboard software to control lighting directly.
- Available Fan Ports:
- Top: 3x120mm or 2x140mm fan ports
- Front: 2x140mm fan ports (2x140mm LFO-5914D addressable ARGB fan included)
- Rear: 1x120mm or 1x140mm fan port (1x140mm LFO-5914D addressable ARGB fan included)
- Top of PSU Shroud: 2x120mm fan ports (2x120mm LFO-6012B black fan included)
- Water Cooling: Supports radiators up to 280/360mm on the top.
- Dust Filters: Removable (magnetic) dustproof net on the top, removable dust filter on bottom of chassis, dust filter under the right steel panel and the bottom fans.
- Power Supply Support: Front mounted ATX power supply.
- Others Features: Adjustable VGA holder mounted on the motherboard side.
Chassis Parts
The diagram illustrates the main components of the AZZA PHOTON PC case. The labeled parts are:
- A: Chassis
- B: Tempered glass panel
- C: Front panel
- D: Metal side panel
- E: Metal mesh side panel
- F: VGA Holder
- G: Dust filters under the bottom fans and chassis bottom
Control Panel Functions
The control panel features several connection ports and buttons:
- POWER SW: Power Switch
- RESET SW: Reset Switch
- USB 3.0: Two USB 3.0 ports
- HD AUDIO COMBO: Combined HD Audio port
- LED: Button for controlling RGB lighting
- Type C: USB Type-C port
3.5"/2.5" HDD/SSD Installation
The case supports the installation of storage drives. It offers two types of mounting solutions:
- A: 2.5" SSD metal tray supports, accommodating up to two 2.5" SSDs.
- B: Multifunctional hard disk bracket supports, capable of holding either two 3.5" HDDs or two 2.5" SSDs.
Max CPU Cooler Height
The maximum height for a CPU cooler that can be installed in this case is 175mm.
Max Video Card Length
The case supports video cards up to 400mm in length. It also accommodates E-ATX motherboards up to 300mm.
VGA Holder
The included VGA holder can be adjusted for optimal graphics card support using its thumb screws.
Cooling System Installation
The case supports radiator installations on the top panel, with support for 280mm and 360mm radiators. The maximum radiator length is 360mm.
Fan Installation
The AZZA PHOTON case supports fan installations in the following locations and configurations:
- TOP: Supports 3x120mm fans or 2x140mm fans.
- FRONT: Supports 2x140mm fans, with two 140mm LFO-5914D addressable ARGB fans pre-installed.
- REAR: Supports 1x120mm fan or 1x140mm fan, with one 140mm LFO-5914D addressable ARGB fan pre-installed.
- BOTTOM: Supports 2x120mm fans, with two 120mm LFO-6012B black fans pre-installed on the PSU shroud.
Fan Installation - Connectors and Wiring
The diagram illustrates the fan connectors and their corresponding connections. An adaptor cable is included in the tooling bag.
| CONNECTOR | CONNECTION |
|---|---|
| 1. Reset(LED) S/W (2pin) | LED Button |
| 2. ARGB LED 5V (3pin) female connector | The 5V/3pin ARGB socket of the motherboard |
| 3. Fan Connector | The master fan connects to the sub-fan, CHA_FANx socket of the motherboard |
| 4. Fan Connector PWM (4Pin) | Power Supply |
| 5. SATA | Power Supply |
| 6. ARGB LED 5V (3pin) male connector | Other 5V/3pin ARGB devices |
Important Notes:
- Before the fan starts, please ensure the PWM connector (4) and SATA connector (5) are connected.
- Press the LED button to cycle through different RGB lighting modes. All ARGB devices are controlled by the LED button. (Make sure the other 3pin ARGB device is connected with 6).
- Ensure connector (2) is inserted into the motherboard. Hold the LED button for 3 seconds to switch the RGB control function to the motherboard RGB sync software. Press the LED button for 1 second to switch the RGB control function to the LED button.
RGB Lighting Switching
To cycle through different RGB lighting modes, press the LED button.
