Mibro Watch C4 User Manual

Product Description

Packing list: Mibro Watch GS Active (Including Silicone strap) X 1, User manual X 1, Magnetic charger X 1, Woven strap X1.

Watch Components:

• 1. Home button: Long press for 2 seconds to turn on, long press for 2 seconds to turn off. Click to return.
• 2. Full touch display
• 3. Shortcut Button
• 4. Charging port (Positive)
• 5. Charging port (Negative)
• 6. Heart rate sensor
• 7. Barometer bore

Connect the watch

1. Please scan the QR code to download the “Mibro Fit" App.
2. Please use "Mibro Fit" to scan the QR code for pairing.

Untie a watch

1. Android system: Select "Delete current device" in the App to unbind the device.
2. iOS system: Select "Delete current device" in the App, and navigate to the Bluetooth interface of the mobile phone system. Follow the prompt to select "Ignore Current Device" to unbind the device.

Charging Instructions

1. Do not charge in a humid environment.
2. Ensure the metal contact on the watch body and magnetic charger are clean and not corroded.
3. Clean the metal contact on the back of the watch and the magnetic charger regularly with a clean flannel to ensure full contact for normal charging.
4. This product does not include a power adapter. Use a computer USB port or a power adapter with an output not exceeding 5V-1A for charging. Purchase power adapters through formal channels and avoid low-quality or fake adapters.

Features

Troubleshooting and After-Sales Regulations

Non-Warranty Regulations

1. Wear and tear, scratches, color changes, damage from chemical reagents, sharp objects, falling, extrusion, and deformation.
2. Unauthorized maintenance, collision, misuse, negligence, abuse, water ingress, accidents, and failures caused by non-standard accessories.
3. Tearing or altering labels, forging anti-counterfeiting marks.
4. Damage caused by force majeure.
5. Non-compliance with performance faults listed in the performance fault table.

Attention Instructions

1. Measurement results are for reference only and not for medical purposes. Follow doctor's instructions and do not self-diagnose or treat based on results.
2. The waterproof grade is 5ATM, but it is not resistant to seawater, deep diving, or prolonged soaking. Steam can affect the watch.
3. The company reserves the right to modify manual contents without notice. Some functions may differ based on software version.

Disposal of Electrical and Electronic Equipment

The symbol of the crossed-out wheeled garbage can on the product, battery, or packaging indicates that electronic products and batteries must be disposed of separately from household waste at the end of their life. Users are responsible for disposing of the device at an official collection point or service for recycling, in accordance with applicable local legislation (WEEE - Waste of Electrical & Electronic Equipment).

Options for Returning Old Devices: Owners can return or collect old devices through public waste management authorities. For a list of collection and return points, visit: https://www.ear-svstem.de/ear-verzeichnis/sammel-und-ruecknahmestellen.

Data Protection

End users are responsible for deleting personal data on waste electrical and electronic devices before disposal.

Declaration of Conformity

Zhenshi Information Technology (Shenzhen) Co., Ltd. declares that this device complies with essential requirements and provisions of European Directives 2015/53/EU and 2011/65/EU. For the full EU Declaration of Conformity, visit: https://www.mibrofit.com/?doc/.

FCC Statement

This equipment has been tested and found to comply with limits for a Class B digital device, per part 15 of FCC Rules. It is designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If interference occurs, try to correct it by:

• Reorienting or relocating the receiving antenna.
• Increasing separation between the equipment and receiver.
• Connecting the equipment to a circuit different from the receiver's.
• Consulting a dealer or experienced radio/TV technician.

Caution: Modifications not explicitly approved by the manufacturer may void the user's authority to operate this equipment. This device complies with part 15 of FCC Rules, subject to two conditions: (1) it must not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

The device has been evaluated to meet general RF exposure requirements and can be used in 0mm exposure conditions, complying with exposure requirements.

Specifications

• Name: Mibro Watch C4
• Model: XPAW021
• Size: ⌀47x11.8mm
• Operational Frequency: 2400-2483.5MHz
• Signal transmission: ≤20dBm
• Battery capacity: 400mAh
• Nominal voltage: 3.8V
• Charging cut-off voltage: 4.35V
• Input: 5V-1A Max.
• FCC ID: 28AYW-XPAW021
• Compatible with: Android 5.0 or iOS 10.0 and above

Contact Information

• After-sales service Email: service@mibrofit.com
• Manufacturer: ZhenShi Information Technology (Shanghai) Co., Ltd, Address: Room 4015, Building 2, No.588 Zixing Road, Minhang District, Shanghai
• Exporter: ZhenShi Information Technology (Shenzhen) Co., Ltd, Address: RM1401-1403,1408, Tower E, Galaxy World, Minzhi Street, Longhua District, Shenzhen, China

Certifications: ROHS, FC, TELEC