Instruction Manual for Amantii models including: CUBE-2025WM Cube Smart 20 Freestanding Electric Fireplace, CUBE-2025WM, Cube Smart 20 Freestanding Electric Fireplace, Freestanding Electric Fireplace, Electric Fireplace

New Outdoor Installation (Rev. 10.08.22)

a-che

Cube Smart Series Outdoor Installation

Amantii Cube Smart 20" Freestanding Electric Fireplace CUBE-2025WM – Flame Authority

Amantii Zero Clearance Series Outdoor Installation

Amantii Zero Clearance 31" Electric Fireplace ZECL-31-3228-STL – Flame Authority

Traditional Series Outdoor Installation

Amantii Traditional 33" Electric Fireplace TRD-33 – Flame Authority

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 180.24KB

Document Document

OUTDOOR INSTALLATIONS
Select electric fireplaces are suitable for outdoor areas protected from direct water impingement. The fireplace shall not be installed in a standalone structure, even if the following requirements are met. In addition to maintaining the listed mantel and combustible clearances, a rain protection overhang factor of½ shall be constructed to the front and to each side of the installed fireplace. See illustrations below. When installed, the fireplace shall be installed on the exterior of a main structure/building. All wiring connections to line power shall be in accordance with local building code requirements.
The overhang(A) must extend at least 1/2 the roof-line h eigh t. Height is measured from the base of the fireplace. For example: if the roof-line(B) is 8" above the base of the fireplace, the overhang(A) must be at 4"

=::;:::LIJ--A

least 4".