LINKSYS WRT1200AC Dual Band Gigabit WiFi Router User Guide

User Guide for LINKSYS models including: WRT1200AC, WRT1200AC Dual Band Gigabit WiFi Router, Dual Band Gigabit WiFi Router, Gigabit WiFi Router, WiFi Router

Open in new tab

Linksys WRT1200AC Dual-Band Wi-Fi Router User Guide - ManualsDock

File Info : application/pdf, 15 Pages, 2.10MB

Linksys-WRT1200AC-Dual-Band-Wi-Fi-Router

USER GUIDE
1200AC
DUAL-BAND GIGABIT WiFi ROUTER

Contents
PRODUCT OVERVIEW
1 WRT1200AC
SETTING UP YOUR ROUTER
5 Where to Find More Help 5 How to Install Your Router
HOW TO USE LINKSYS SMART WI-FI
6 How to Connect to Linksys Smart WiFi 6 How to Change Router Settings
TROUBLESHOOTING
10 Your router was not successfully set up 11 Your Internet cable is not plugged in message 11 Cannot access your router message
SPECIFICATIONS
13 Linksys WRT1200AC

WRT 1200AC | Contents

Product Overview
WRT 1200AC

Front View

USB 2 Primary Indicator

Ethernet Primary Indicators

Front Panel

USB 2 Secondary Indicator

Ethernet Secondary Indicators

WRT 1200AC | Product Overview

FRONT PANEL INDICATORS
(White) The power LED is solid white while the router is powered on. It will blink when the router goes through its selfdiagnostic mode during every bootup.
Internet (White/Amber) The Internet LED is solid white when connected to the Internet. It blinks white while the router works to establish a connection. A solid amber LED indicates the connection is down due to configuration issues. Amber blinking indicates that the connection is down due to hardware issues.
2.4 GHz (White) The Wireless LED is solid white when one or more clients are connected to the 2.4 GHz network. If the LED is blinking white, the router is sending or receiving data over the 2.4 GHz network.
5 GHz (White) The Wireless LED is solid white when one or more clients are connected to the 5GHz network. If the LED is blinking white, the router is sending or receiving data over the 5 GHz network.
eSATA (White) When off, the USB/eSATA port is off or a USB device is connected. The LED is solid white when an eSATA device is connected. A blinking white LED indicates activity through the eSATA port.
USB 1 (White) When off, the USB /eSATA port is off or an eSATA device is connected. The LED is solid white when a USB device is connected. A blinking white LED indicates activity on the port.
USB2 Primary (White) When off, the USB 3.0 port is off. The LED is solid white when a USB device is connected. A blinking white indicates activity on the port.
USB2 Secondary (White) When off, a USB 1.0 or USB 2.0 device is connected. A solid white LED indicates a USB 3.0 device is connected.
ETHERNET 1 thru 4 (Primary) (White) These numbered LEDs correspond with the numbered ports on the router's back panel. If the white LED is solid, the router is connected to a device through that port. A flashing white LED indicates network activity over that port.
1

Product Overview
ETHERNET 1 thru 4 (Secondary) (White) If the white LED is off, the router is successfully connected to a device through that port at 10/100 Mbps. A solid white LED indicates that the router is successfully connected to a device at 1000 Mbps.
(White/Amber) The LED blinks slowly for up to two minutes during WiFi Protected Setup. It will be solid white for five seconds to indicate a successful connection. The LED blinks amber if the WiFi Protected Setup process fails. Make sure the client device supports WiFi Protected Setup. Wait until the LED is off, and then try again. The router supports one session at a time.
2x Adjustable External Antennas

Wi-Fi Protected Setup Button

Ethernet Ports

Back View

USB 3.0 Port

Reset Button

Internet Port

Combo USB 2.0/ eSATA Port

Power Port

Power Switch

Adjustable External Antennas This router ships with two adjustable external antennas that should be connected to the router before powering it on. To connect the antennas, twist the antenna connector clockwise onto the antenna port on the router.

WRT 1200AC | Product Overview

Note: For best performance, position the side antennas vertically as shown in the picture.
Wi-Fi Protected Setup button Press to easily configure wireless security on WiFi Protected Setupenabled network devices. Ethernet Ports Connect Ethernet cables to these blue gigabit (10/ 100/ 1000) ports, and to wired devices on your network.
Note: For best performance, use CAT5e or higher rated cables on the Ethernet ports.
Internet Port Connect an Ethernet cable to this yellow gigabit (10/ 100/ 1000) port, and to a broadband Internet cable/DSL or fiber modem.
Note: For best performance, use CAT5e or higher rated cables on the Ethernet ports.
USB 3.0 Port Connect and share a USB or eSATA drive on your network or on the Internet. USB 2.0/eSATA Combo Port Connect and share a USB or eSATA drive on your network or on the Internet. You can also connect a USB printer and share it across your network. Reset Button Press and hold for 10 seconds (until the power LED starts flashing) to reset the router to factory settings. You can also restore the factory settings using Linksys Smart WiFi on the Internet or mobile app. Power Port Connect the included AC power adapter. Power Button Press to turn on the router.
2

Product Overview

Avoid Overheating

Suggested Mounting Hardware 3 mm

6-7 mm

1.5-2 mm

Wall-Mounting Placement The router has wallmount slots on the bottom of each foot for flexibility in mounting the router on the wall. The distance between the slots on the short side is 104 mm. The distance between the slots on the longer side is 2 1 0 mm. Two screws are needed to mount the router.
210mm 8 1/4"
104mm 4 3/32"

Note: Linksys is not responsible for damages incurred by unsecured wallmounting hardware.
Mounting Instructions 1. Determine where you want to mount the router and which side you should use to
mount it. Make sure that the wall you use is smooth, flat, dry, and sturdy. Make sure the location is within reach of an electrical outlet.
2. Before drilling holes, choose the template (short side or long side) that fits your installation. Drill the holes using the correct template.
3. Insert a screw into each hole and leave 4 mm of its head exposed.
4. Position the router so the wallmount slots line up with the two screws.
5. Place the wallmount slots over the screws and slide the router down until the screws fit snugly into the wallmount slots.
Wall-Mounting Template (Short Side) Print this page at 100% size.
Cut along the dotted line, and place on the wall to ensure precise spacing of holes.

104 mm

WRT 1200AC | Product Overview

Product Overview
Wall-Mounting Template (Long Side) Print this page at 100% size. Cut along the dotted line, and place on the wall to ensure precise spacing of holes.
210 mm

WRT 1200AC | Product Overview

Setting Up Your Router

WHERE TO FIND MORE HELP
· Linksys.com/support/WRT1200AC (documentation, downloads, FAQs, technical support, live chat, forums)
· Linksys Smart WiFi help (connect to Linksys Smart Wi-Fi, then click Help at the top of the screen)

HOW TO INSTALL YOUR ROUTER
To Install Your Router: 1. If replacing an existing router, disconnect it.
2. Connect the antennas and power on your new router.
3. Power cycle your modem
4. Connect the Internet cable from your modem to the yellow Internet port on your router. Wait until the power light on the front of the router is solid.
5. Connect to the secure wireless network name shown in the Quick Start Guide that came with your router. (You can change the network name and password later.) If you need help connecting to the network, refer to your device documentation. Note: You will not have Internet access until router setup is complete.
6. Open a web browser and follow the instructions to complete setup. If instructions do not appear in the web browser, enter linksyssmartwifi.com in the address bar.
7. At the end of setup, follow the onscreen instructions to set up your Linksys Smart WiFi account. Use Linksys Smart WiFi to configure your router from any computer with an Internet connection.
Manage Your Router's Settings: · Change your router's name and password · Set up guest access · Configure parental controls · Connect devices to your network · Test your Internet connection speed
Note: As part of Linksys Smart WiFi account setup, you will be sent a verification email. Make sure that you open the email and click the provided link.

WRT 1200AC | Setting Up Your Router

How to Use Linksys Smart Wi-Fi
HOW TO CONNECT TO LINKSYS SMART WI-FI
To Open Linksys Smart Wi-Fi: 1. Visit linksyssmartwifi.com or myrouter.local (if not online) with a web browser. 2. Enter the email address and password you set up earlier, and click Log in.

HOW TO CHANGE ROUTER SETTINGS
Note: For additional help on any menu, click Help at the top of the screen.
1. Log into your Linksys Smart WiFi account by visiting linksyssmartwifi.com or myrouter.local (if not online) with a web browser.
2. In the menu on the left, click an option.

WRT 1200AC | How to Use Linksys Smart Wi-Fi

Network Map -- Lets you display and manage all network devices connected to your router. You can view devices on your main network and your guest network, disconnect devices, or display information about each device.
6

Guest Access -- Lets you configure and monitor a network that guests can use without accessing all of your network resources.
Media Prioritization -- Lets you set which devices and applications have top priority for your network traffic.

Parental Controls -- Lets you block web sites and set Internet access times.

WRT 1200AC | How to Use Linksys Smart WiFi

Speed Test -- Lets you test your network's Internet connection speed.

Connectivity -- Lets you configure basic and advanced network settings.

External Storage -- lets you access an attached USB drive or eSATA drive (neither drive is included) and set up file sharing, a media server, and FTP access.

Troubleshooting -- Lets you diagnose problems with your router and check the status of the network.

WRT 1200AC | How to Use Linksys Smart WiFi

Wireless -- Lets you configure your router's wireless network. You can change the security mode, password, MAC filtering, and connect devices using WiFi Protected SetupTM.

Security -- Lets you configure your router's wireless security. You can set up the firewall, VPN settings, and make custom settings for applications and games.

WRT 1200AC | How to Use Linksys Smart WiFi

Troubleshooting
This chapter can help you solve common setup issues and connect to the Internet. You can find more help from our awardwinning customer support at linksys.com/support.
YOUR ROUTER WAS NOT SUCCESSFULLY SET UP
If Linksys Smart Wi-Fi Did Not Complete The Setup: · Using a paperclip or pin, press and hold the Reset button until the power LED on the
front of the router starts flashing (about 10 seconds). Install the router again.
Your Router's Appearance May Vary · If that doesn't work, temporarily disable your computer's firewall (see the security
software's instructions for help). Install the router again. · If you still haven't set up the router, find another computer, and use that computer to
install the router again.

WRT 1200AC | Troubleshooting

Troubleshooting

YOUR INTERNET CABLE IS NOT PLUGGED IN MESSAGE
If you get a "Your Internet cable is not plugged in" message when trying to set up your router: 1. Make sure that an Ethernet or Internet cable (or a cable like the one supplied with your router) is securely connected to the yellow INTERNET port on the back of the router and to the appropriate port on your modem. This port on the modem is usually labeled Ethernet, but may be named Internet or WAN.
Back View of Router

2. Make sure that your modem is connected to power and is turned on. If it has a power switch, make sure that it is set to the ON or l position.
3. If your Internet service is cable, verify that the cable modem's CABLE port is con nected to the coaxial cable provided by your ISP.
4. Or, if your Internet service is DSL, make sure that the DSL phone line is connected to the modem's DSL port.
5. If your computer was previously connected to your modem with a USB cable, discon nect the USB cable.
Install the router again.
CANNOT ACCESS YOUR ROUTER MESSAGE
To access your router, you must be connected to your own network. If you currently have wireless Internet access, the problem may be that you have accidentally con nected to a different wireless network.
To Fix the Problem on Windows Computers: 1. On your Windows desktop, rightclick the wireless icon in the system tray.
Icon could be different depending on your version of Windows.

Back View of Cable Modem

2. Click View Available Wireless Networks. A list of available networks appears.

Back View of DSL Modem

WRT 1200AC | Troubleshooting

Troubleshooting

3. Click your own network name. Click Connect. In the example below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys ESeries network, BronzeEagle in this example, is shown selected.

To Fix the Problem on Mac Computers: 1. In the menu bar across the top of the screen, click the AirPort icon. A list of
wireless networks appears. Linksys Smart WiFi has automatically assigned your network a name.
2. In the example below, the computer was connected to another wireless network named JimsRouter. The name of the Linksys ESeries network, BronzeEagle in this example, is shown selected.

4. If you are prompted to enter a network key, type your password into the Network key and Confirm network key fields. Click Connect.

3. Click the wireless network name of your Linksys ESeries router (BronzeEagle in the example).
4. Type your wireless network password into the Password field. Click OK.

You should now be able to access the router. WRT 1200AC | Troubleshooting

Where to find more help · Linksys.com/support/WRT1200AC (documentation, downloads, FAQs, technical
support, live chat, forums) · Linksys Smart WiFi (linksyssmartwifi.com; click Help at the top of the screen)
Note: Licenses and notices for third party software used in this product may be viewed on http://support.linksys.com/enus/license. Please contact http://support.linksys. com/enus/gplcodecenter for questions or GPL source code requests.
12

Specifications

LINKSYS WRT1200AC

Model Name Description Model Number Switch Port Speed Radio Frequency # of Antennas Ports
Buttons Front Panel Indicators
UPnP Security Features Security Key Bits Storage File System Support Browser Support

Linksys DualBand Gigabit WiFi Router DualBand AC Router with Gigabit and 2×USB WRT1200AC 10/100/1000 Mbps (Gigabit Ethernet) 2.4 GHz and 5 GHz 2 external adjustable antennas Power, 1 x USB 3.0, 1 x combo USB 2.0/eSATA, Internet, Ethernet (14), RPSMA (2) Reset, WiFi Protected Setup, Power Power, INTERNET, 2.4 GHz, 5GHz, USB1, USB2, Ethernet (14), WiFi Protected Setup Supported WEP, WPA, WPA2, RADIUS Up to 128bit encryption FAT, NTFS, and HFS+ Internet Explorer 8 or higher, Firefox 4 or higher, Google Chrome 10 or higher, and Safari 4 or higher

Environmental Dimensions
Unit Weight Power Certifications
Operating Temp. Storage Temp. Operating Humidity Storage Humidity

9.68" x 7.64" x 2.05" without antennas (246 x 194 x 52 mm) 29oz. (833g) 12V, 2.5A FCC, IC, CE, WiFi a/b/g/n/ac, Windows 7, Windows 8, DLNA 32 to 104°F (0 to 40°C) 4 to 140°F (20 to 60°C) 10 to 80% relative humidity, noncondensing 5 to 90% noncondensing

Note:
For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support.
Specifications are subject to change without notice.
Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.

WRT 1200AC | Specifications

References

Adobe InDesign CS6 (Macintosh) iLovePDF