Modern Home T207-WH Lamp Instruction Manual
Product Model: T207-WH
Manufactured by: Modern Home
Country of Origin: Made in China
Assembly & Installation Instructions
Dear Customer:
Thank you for your business! If you have any questions or problems, please send us an email to support@4modernhome.com or call us at 469-312-6428. We will do everything possible to make you completely satisfied with your purchase. Product reviews help future customers to make their purchase decision. You are encouraged to share your experience by leaving a short product review on the platform where you bought this product. Thank you!
4Modern Home
Important Safety Information & Warnings
NEC Compliance: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
California Proposition 65 Warning: This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Installation Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s).
Technical Specifications
Applicable Bulb Type: A19, A60, T45, ST58... (Excluding bulb)
Wire Connection Diagram
Wires meeting safety standards are required to connect the electrical circuit.
CAUTION: Risk of fire ?
Please read all instructions carefully. Before you proceed to install, make sure that the power supply is turned off and remains off until installation is completed.
[Diagram Description: The diagram shows electrical connections with terminals labeled L (Live) and N (Neutral). Wires are shown connecting to these terminals.]
Parts Included
| Code | Part Description | QTY |
|---|---|---|
| A | Body | 1 |
| B | Lamp socket | 1 |
| C | Harp | 1 |
| D | Shade | 1 |
| E | Finial | 1 |
Assembly Steps
- Unpack all parts from cartons carefully.
- Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
- Tighten the lamp socket(B) into the body(A) until tight.
- Place the harp(C) onto the lamp socket(B).
- Place the shade(D) onto the harp(C).
- Tighten the finial (E) into the harp(C) until tight.