User Manual for Shenzhen Chaowei Technology models including: V10MAX, 2A7N2-V10MAX, 2A7N2V10MAX, V10 Max Bluetooth Speaker, V10, Max Bluetooth Speaker
Shenzhen Chaowei Technology Co.,Ltd V10MAX Bluetooth Speaker 2A7N2-V10MAX 2A7N2V10MAX v10max
V10 Max
V10 Max Bluetooth Speaker
/ EQ TWS /// / / /
AUX TF Type-c 11 USB
TWS
5.2 18 8 10400mAhmAh Type-c 5v/3.0A 80W 60 2070% 1250% 4-5
AUX TF USB
-42dB 60HZ-18KHZ IPX6 MP3/SBC A2DP V1.3,ACRCP V1.4,HFP V1.6 3.5mm 64G U64G 260*106*86mm 1683g
2 2
BT,TF,AUX,U
38
EQ
EQ"EQ"3D
TWSTWS
///AUX
23
/
/
1 . Wireless 5.2, ios 2 .
1 . TF 64GB 2 . T F 3 . 3.5mm AUX 4 . "V 10 Ma x"M TF
1 . U USB 2 . UUSB
1 . 2 . " " 3 . 4 . 5. 6 . T WS TWS TWS 7 . T WS TWS 8 . TWS"M" 8
TWS
Power ON/OFF Mode Selection EQ Switch TWS Pairing Play/Pause/End the call/Redial /Answer or Reject Phone call Volume-/Previous Track Volume+/Next Track
AUX in TF port Type-c port 11 USB port
Wireless verston
5.2
Transmission range 18M(Open field)
TWS range
8M
Battery capacity
10400mAh
Input
Type-c 5V/3.0A
Rated power Standby time
80W Automatic shutdown after 60 minutes of inactivity
Talking time
20 hours(70% volume)
Playing time
12 hours(50% volume)
Charging time
4-5 hours
Sensitivity Freqency range Waterprrof Decoding format Support profile AUX mode TF mode USB mode Size Weight
-42dB 60HZ-18kHZ IPX6 MP3/SBC A2DP V1.3,ACRCP V1.4,HFP V1.6 3.5mm plug 64G max 64G max 260x106x86mm 1683G
EQ
Long press
Short press Long press
Short press Short press Short press Long press Double click
Press Press
Press for 2 second to power on and into wireless Search.(Blue light flashing) Pess for 2seconds to power off. Short press the mode to switch:Wireless,TF,AUX and USB Press 3 seconds to disconnect the wireless connection Press 8 seconds to restore the factory settings.
The default EQ is full-range,a short press of the"EQ"button is 3D (Blue linght on). and another short press is subwoofer(Green linght on). Short press to enter TWS (Yellow light flashing)or disconnect the TWS(Blue light flashing). Short press to play or pause music/answer or end the call Press for 2 seconds to reject the call.Press for 3 seconds to activate the voice assistant. Double click to redial the last number dialled. Short press to reduce the volume,long press for the previous song. Short press to increase the volume,long press for the next song.
1. Wireless version:Wireless 5.2,support for ios,Android and other devices. 2. Press the power button,then will enter Wireless mode,the speaker will emit Wireless tone,
entering pairing status,the phone will seach for the Wireless pairing name,click can be successfully connected.
1. Max support reading 64G Micro SD card,Insert any Micro SD card,the speaker will playing the audio files in the Micro SD card automatically.Inser the 3.5mm audio cable,the speaker will shift to AUX mode.
2. If the wireless of the mobile phone is connected to the"V10 Max"speaker, press the"M"mode button to switch TF card playback.
1. Insert the usb flash drive after booting and automatically enter the USB playback mode. 2. Pull out the USB flash drive, the USB mode end.
TWS means true wireless stereo. Let's say two Wireless speaker are able to be paired and playing music synchronously .
1. Please make sure these two speaker to be paired dicconnect from your Wireless device before you turn them on. Then
please turn on two speakers.
2. Short press the matching button"
"these will be voice prompt in the mean time, the yellow light will be shinning
to the matching mode.
3. When enter into the matching mode with the voice prompt, the yellow light on. Main unit blue light flashes waiting for
handest connection ,secondary unit blue light goes out.
4. Select searching mode on your device,finds" V8 Max ", select it and connect.
5. They will perform as the stereo sounding system.
6. When the TWS is connecd,press the"TWS"button to disconnect the TWS and the yellow light will go out.
7. Once the speakers are well paired an the first time, they will be automatically paired next time without the above
pairing operation.
8. If the speaker used to be paired,it is suggested to press the matching button" M "for 8 seconds,and restart the machine
after,cancel the automatic connection.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Adobe PDF library 10.01 Adobe Illustrator(R) 17.0