Buy musical instruments online from the market leader – United States
User Manual for Harley Benton models including: DB01 Electric Upright Bass, Electric Upright Bass, Upright Bass, DB02
2 mai 2022 — Unbalanced transmission is mainly used in semi-professional environment and in hifi use. Instrument cables with two conductors (one core plus shielding) are ...
Harley Benton DB02-SB Electric Double Bass – Thomann France
Harley Benton DB01-BK Electric Double Bass – Thomann France
File Info : application/pdf, 24 Pages, 2.10MB
DocumentDocumentDB01, DB02 Electric Upright Bass User Manual Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 02.05.2022, ID: 451963, 451975, 451966, 451976, ... (V2) Table of Contents Table of Contents 1 General information.............................................................................................................. 5 1.1 Further information........................................................................................................ 5 1.2 Notational conventions................................................................................................. 5 1.3 Symbols and signal words........................................................................................... 6 2 Safety instructions................................................................................................................. 7 3 Scope of delivery..................................................................................................................... 8 4 Assembly instructions.......................................................................................................... 9 4.1 Setting the height......................................................................................................... 10 4.2 Body support mounting............................................................................................. 11 4.3 Mounting the bridge................................................................................................... 11 4.4 Tuning the strings......................................................................................................... 12 5 Connections and controls................................................................................................ 13 5.1 Connecting and inserting the battery................................................................... 13 5.2 Connecting the instrument cable........................................................................... 14 5.3 Connecting audio devices......................................................................................... 14 5.4 Connecting headphones........................................................................................... 14 5.5 Adjusting Volume and SubBass............................................................................... 15 6 Maintenance........................................................................................................................... 16 6.1 Changing strings........................................................................................................... 16 6.2 Battery change............................................................................................................... 16 7 Technical specifications.................................................................................................... 17 8 Plug and pin assignments................................................................................................ 19 9 Cleaning.................................................................................................................................... 20 10 Protecting the environment........................................................................................... 21 3 DB01, DB02 Electric Upright Bass 4 DB01, DB02 Electric Upright Bass General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future refer- ence. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development. We therefore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de. 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download Keyword search Online guides Personal consultation Service This manual is also available as PDF file for you to download. Use the search function in the electronic version to find the topics of interest for you quickly. Our online guides provide detailed information on technical basics and terms. For personal consultation please contact our technical hotline. If you have any problems with the device the customer service will gladly assist you. 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. 5 DB01, DB02 Electric Upright Bass General information Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: 1. Switch on the device. 2. Press [Auto]. ð Automatic operation is started. 3. Switch off the device. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word DANGER! CAUTION! NOTICE! Meaning This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. This combination of symbol and signal word indicates a possible dangerous situation that can result in minor injury if it is not avoided. This combination of symbol and signal word indicates a possible dangerous situation that can result in mate- rial and environmental damage if it is not avoided. Warning signs Type of danger Warning danger zone. 6 DB01, DB02 Electric Upright Bass Safety instructions 2 Safety instructions DANGER! Danger for children Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke! Never let children play unattended with the product. CAUTION! Possible hearing damage Using headphones for a prolonged period and at high volume can cause hearing damage. Avoid using the device at high volume, especially when using headphones. NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter `Technical specifications' of this user manual. Avoid heavy temperature fluctuations and do not switch the device on immediately after it was exposed to temperature fluctuations (for example after transport at low outside temperatures). Dust and dirt inside can damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be main- tained by qualified service personnel at regular intervals to prevent overheating and other malfunction. NOTICE! Possible damage by leaking batteries Leaking batteries can cause permanent damage to the device. Take batteries out of the device if it is not going to be used for a longer period. NOTICE! Possible property damage by magnetic fields Loudspeakers produce a static magnetic field. Therefore, maintain an appropriate distance to devices that can be adversely affected or damaged by an external magnetic field. NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if necessary, i.e. felt-pad floor protectors or similar. 7 DB01, DB02 Electric Upright Bass Scope of delivery 3 Scope of delivery Keep the original packaging. To optimally protect the instrument against vibration, dust and moisture during transportation or storage use the suitable carrying bag. The package includes the following components: n 1 × electric upright bass with active pickup system and 9 V battery supply n 1 × endpin (pre-assembled) n 1 × height-adjustable bridge n 1 × strings set (pre-assembled) n 1 × body support n 1 × carbon bow n 1 × bow rosin n 1 × suitable transport bag Assembling and tuning your instrument are described in detail in the following sec- tions. 8 DB01, DB02 Electric Upright Bass 4 Assembly instructions Overview A B C ö ' Assembly instructions , ( ) *+ # D C $ - . % D & A (front side) B (rear side) C (operating ele- ments) 1 Nut 2 Body support 3 Bridge 4 Tailpiece 5 Endpin with wing screw 6 Machine heads C Operating elements D Connections 7 [Volume] Volume control 8 [SubBass] Bass control 9 DB01, DB02 Electric Upright Bass Assembly instructions D (connections) 9 [Mp3in] Input socket for audio devices such as MP3 players (3.5 mm jack socket, stereo) 10 [Phone] Output socket for headphones (3.5 mm jack socket, stereo) 11 [Power ball] Status LED for the battery condition. The status LED only works when an instrument cable is con- nected. 12 Connector for instrument cable (1/4" jack socket, mono) 13 Battery compartment for 9 V block battery (not included) 4.1 Setting the height The endpin to adjust the height of the instrument is fully retracted in delivery condi- tion and fixed with one wing nut. Turn the wing nut counterclockwise to loosen the fixation and the endpin. Drag out the endpin so far that the instrument can be played at the desired and for you ergonomically correct and comfortable height. Then tighten the wing nut clockwise to fix the endpin in this position. 10 DB01, DB02 Electric Upright Bass Assembly instructions 4.2 Body support mounting Take the body support from the transport bag of the instrument and insert their ends into the openings provided on the side of the body. Make sure that the curvature of the body support points to the rear and that it sits tension-free on the body. Tighten the bracket screws by turning them clockwise. 4.3 Mounting the bridge On delivery, the strings of the instrument have minimum string tension between the machine heads and the tailpiece on the fretboard. Remove the cable tie that secures the strings for transportation. Place the bridge in the holder provided on the top of the instrument body and set the desired height using the two screws. NOTICE! Possible deformation When adjusting the height of the bridge, excessive pretension can over- stretch the strings or damage the bridge or the top of the body. On excessive tension, reduce the pretension of the strings or the height of the bridge to avoid damaging the strings, the bridge or the top of the body. Make sure that all strings run correctly in the grooves of the bridge (the E string has to run in the biggest groove). You can then tune all strings with the machine heads using a tuner device to the cor- rect pitch (usually E, A, D and G). 11 DB01, DB02 Electric Upright Bass Assembly instructions 4.4 Tuning the strings Tune all strings with the pegs using a tuner device to the correct pitch (usually E-A-DG). 12 DB01, DB02 Electric Upright Bass Connections and controls 5 Connections and controls CAUTION! Possible hearing damage Using headphones for a prolonged period and at high volume can cause hearing damage. Avoid using the device at high volume, especially when using head- phones. NOTICE! Risk of breakage, possible deformation When placing the instrument with the fretboard down, there is a risk of damaging the fingerboard and the tailpiece. Avoid any compressive load on the rear of the instrument, if it is placed for the assembly or for service work with the fretboard down on a solid surface. Before connecting amplifiers or headphones, the volume controls of the cello and the equipment to be connected must be set to "minimum". This avoids loud crack noises when switching on. 5.1 Connecting and inserting the battery The instrument is operated with a 9 V block battery. The battery is not included in the scope of delivery. Open the battery compartment cover on the back of the instrument. Clamp the power cable with the correct polarity to the battery. Insert the battery into the bat- tery compartment and close the battery compartment cover. It must audibly click into position. 13 DB01, DB02 Electric Upright Bass Connections and controls NOTICE! Risk of fire due to incorrect polarity Incorrectly inserted batteries may destroy the device or the batteries. Ensure that proper polarity is observed when inserting batteries. NOTICE! Possible damage by leaking batteries Leaking batteries can cause permanent damage to the device. Take batteries out of the device if it is not going to be used for a longer period. 5.2 Connecting the instrument cable The connector for the instrument cable (1/4" jack, mono) is located on the back of the instrument. 5.3 Connecting audio devices The [Mp3in] connection for audio devices (3.5 mm jack socket, stereo) is located at the side of the instrument body. 5.4 Connecting headphones Connection [Phone] connection for headphones (3.5 mm jack socket, stereo) is located at the side of the instrument body. When using headphones with 1/4" jack, you need an appropriate adapter. 14 DB01, DB02 Electric Upright Bass Connections and controls 5.5 Adjusting Volume and SubBass The controls to adjust the [Volume] and [SubBass] are located at the side of the instru- ment body. 15 DB01, DB02 Electric Upright Bass Maintenance 6 Maintenance 6.1 Changing strings Proceed as follows to change the strings: Strings are subject to a natural aging process, which is also affected by the frequency of use of the instrument. Changing the strings is recommended if the sound quality of the instrument decreases audibly. Always replace the complete set of strings (strings of 3/4 length) and always go string by string. In this way you avoid a strong temporary bending of the neck due to reduced string tension. The bridge also remains in the correct position and does not have to be readjusted. 1. For example, loosen the run-down E string from the capstan of the machine head and from the tailpiece. 2. Thread the new E string into the tailpiece, pull it over the bridge into the cap- stan bore of the machine head. 3. Hook the string end to the capstan and tighten the string tension slowly. At the first windings, pay particular attention that the string is taut to the mechanics. 4. Make sure that the string is running correctly through the grooves of bridge and nut at the upper end of the neck. 5. Slowly increase the string tension until the correct pitch is reached. Use a tuner or a pitch pipe for reference. 6. Proceed in the same way with the A, D and G strings and then tune all strings again successively to the correct pitch. Note that the string tension will drop a little and the instrument needs to be retuned several times until the strings stay in tune. 6.2 Battery change 1. Replace the inserted battery if necessary (weak output signal) or at regular intervals. 2. Open the battery compartment cover on the back of the instrument. Remove the battery and unplug the connection cable from the battery terminals. 3. Clamp the power cable with the correct polarity to the new battery. Insert the battery into the battery compartment and close the battery compartment cover. It must audibly click into position. NOTICE! Risk of fire due to incorrect polarity Incorrectly inserted batteries may destroy the device or the batteries. Ensure that proper polarity is observed when inserting batteries. 16 DB01, DB02 Electric Upright Bass Technical specifications 7 Technical specifications Input connections Output connections Scale Body material Fretboard material Neck material Pick-up Machine heads Operating supply voltage Dimensions (B × H × T), incl. body support Weight Ambient conditions 1 × 3.5 mm phone socket 1 × 3.5 mm phone socket 1 × 1/4" jack socket 105 cm Paulownia Birch (Betula albosinensis) Maple active pickup system Machine heads 9 V block battery 32.5 cm × 169.5 cm - 201.1 cm × 15.5 cm 5.3 kg Temperature range Relative humidity 0 °C...40 °C 20 %...80 % (non-condensing) DB01 Harley Benton DB01-AM Electric Double Bass, amber Harley Benton DB01-BK Electric Double Bass, black Harley Benton DB01-CB Electric Double Bass, carbon Harley Benton DB01-RD Electric Double Bass, red Harley Benton DB01-SB Electric Double Bass, sunburst Harley Benton DB01-WH Electric Double Bass, white Item number 539184 Item number 451963 Item number 451975 Item number 539183 Item number 451966 Item number 539182 DB02 Harley Benton DB02-AM Electric Double Bass, amber Harley Benton DB02-BK Electric Double Bass, black Harley Benton DB02-CB Electric Double Bass, carbon Harley Benton DB02-RD Electric Double Bass, red Harley Benton DB02-SB Electric Double Bass, sunburst Harley Benton DB02-WH Electric Double Bass, white Harley Benton DB02-BEM Electric Double Bass, birds eye maple Item number 539178 Item number 451976 Item number 451978 Item number 539179 Item number 451977 Item number 539175 Item number 511889 17 DB01, DB02 Electric Upright Bass Technical specifications Harley Benton DB02-LH/BK Elec. Double Bass, black Harley Benton DB02-LH/SB Elec. Double Bass, sunburst Further information Number of strings 4 Bag included yes Case included no Bow included yes Stand included no Endpin included yes height-adjustable bridge yes Item number 539468 Item number 539469 18 DB01, DB02 Electric Upright Bass Plug and pin assignments 8 Plug and pin assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equipment in such a way that a perfect sound experience is ensured. Please note these advices, because especially in `Sound & Light' caution is indicated: Even if a plug fits into the socket, an incorrect connection may result in a destroyed power amp, a short circuit or `just' in poor transmission quality! Balanced and unbalanced transmis- sion Unbalanced transmission is mainly used in semi-professional environment and in hifi use. Instrument cables with two conductors (one core plus shielding) are typical rep- resentatives of the unbalanced transmission. One conductor is ground and shielding while the signal is transmitted through the core. Unbalanced transmission is susceptible to electromagnetic interference, especially at low levels, such as microphone signals and when using long cables. In a professional environment, therefore, the balanced transmission is preferred, because this enables an undisturbed transmission of signals over long distances. In addition to the conductors `Ground' and `Signal', in a balanced transmission a second core is added. This also transfers the signal, but phase-shifted by 180°. Since the interference affects both cores equally, by subtracting the phase-shifted signals, the interfering signal is completely neutralized. The result is a pure signal without any noise interference. 1/4" TS phone plug (mono, unbal- anced) 1 2 Signal Ground, shielding Three-pole 1/8" mini phone jack (stereo, unbalanced) 1 Signal (left) 2 Signal (right) 3 Ground, shielding 19 DB01, DB02 Electric Upright Bass Cleaning 9 Cleaning Clean the instrument and especially the strings after playing with a dry, soft, lint-free cloth. Stubborn dirt can be removed with a slightly dampened cloth. Never use cleaners containing alcohol or thinner. 20 DB01, DB02 Electric Upright Bass Protecting the environment 10 Protecting the environment Disposal of the packaging material For the packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging. Disposal of batteries Batteries do contain some hazardous chemicals so they should not be thrown away with the normal household waste. They should be returned to the manufacturer for disposal or recycled elsewhere in accordance with your local regulations. Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste. Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. 21 DB01, DB02 Electric Upright Bass Notes 22 DB01, DB02 Electric Upright Bass Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de