Yolin YL-BLE01 Bluetooth Module User Manual

User Manual for Tianjin Yolin models including: 2AYOI-YLBLE01, 2AYOIYLBLE01, ylble01, YL-BLE01 Bluetooth Module, YL-BLE01, Bluetooth Module, Module

离忧

User Manual

Tianjin Yolin Technology Co.,Ltd. YLBLE01 Bluetooth module 2AYOI-YLBLE01 2AYOIYLBLE01 ylble01

File Info : application/pdf, 7 Pages, 395.96KB

GetApplicationAttachment.html?id=7891211

YL-BLE01 User Manual

Contents YLBLE01 ..................................................................................................................................................................................... 1 User Manual.............................................................................................................................................................................. 1 1 -Product overview .................................................................................................................................................................. 1 2.1 Basic parameters .............................................................................................................................................................. 1 3 -Cation: ................................................................................................................................................................................... 2 Operational use conditions........................................................................................................................................................ 2 Antenna used............................................................................................................................................................................. 3 §15.19 Statement ...................................................................................................................................................................... 4 §15.21 Information to user........................................................................................................................................................ 4 RF Exposure compliance statement .......................................................................................................................................... 4

1 -Product overview YLBLE01 is a low-power embedded Bluetooth module developed by Tianjin Yolin Technology Co.,Ltd. It can be
widely applied in the field of E-bike wireless communication. The module has the characteristics of low power consumption, small size, long transmission distance, and strong anti-interference ability. The module is equipped with a high-performance serpentine antenna. The module adopts a hardware interface design in the form of a stamp half hole. This module can be used to develop consumer electronic products based on Bluetooth 4.2 (BLE, low-power Bluetooth). 2 -Module parameters
2.1 Basic parameters

Working voltage Working frequency band Receiver sensitivity Crystal frequency Packaging method Operation temperature Storage temperature

2.3~3.6VSuggest using 3.3V 2402MHz~2480MHz -94dBm 16MHz SMTStamp Half Hole -20 ~ + 80 -40 ~ + 125

2.2 Size packaging

Name

GND

3.3V

BLZ

RES

SLK

SWD

P15

BRTS

BCTS

Function Power module power supply

Notes GND 2.3~3.6VSuggest using 3.3V

Module reset, low level effective Module Enable Control End INPUT/OUTPUT.
INPUT/OUTPUT.
I/O

Serial wire clock signal. Can also be used as a GPIO (digital interface any
route is not supported). Serial wire data signal. Can also be used as a GPIO (digital interface any
route is not supported).

Module serial port sender Module serial port receiver

3 -Cation:
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Operational use conditions
2

Working voltage 3.3V. Working temperature range -20 ~80 .

Antenna used Antenna Type PCB Antenna

Brand/ manufacturer

Model No.

TianjinYolinTechnologyCo.,Ltd. YLBLE01

Max. Antenna Gain 1.84dBi

Notice to Host Product Manufacturer Any deviation(s) from the defined parameters of the antenna trace, as described by this instruction, host product manufacturer must notify us that you wish to change the antenna trace design. In this case, a Class II permissive change application is required to be filed by us, or you (host manufacturer) can take responsibility through the change in FCC ID (new application) procedure followed by a Class II permissive change application. Every new host configuration requires FCC Class II Permissive Change filing by the grantee.

Notice to Host manufacturer when installing our Limited Module and intend to use Contains FCC ID: 2AYOI-YLBLE01

Limited module procedure The module doesn't have its own RF shielding, The host should provide the RF shielding to the modular, which belong to Limited module. Standard requires: Clear and specific instructions describing the conditions, limitations and procedures for third parties to use and/or integrate the module into a host device (see Comprehensive integration instructions below). Supply example as follows: Installation Notes: (1). Power supply for the limited module with FCC ID: 2AYOI-YLBLE01 is DC 3.3V, when you use product with this module design, the power supply cannot exceed this value. (2). When connect the module to the host device, the host device must be powered off. (3). Make sure the module pins correctly installed. (4). Make sure that the module does not allow users to replace or demolish. Information on test modes and additional testing requirements Host manufacturer which install this modular with limit modular approval should perform the test of radiated emission and spurious emission according to FCC part 15C: 15.247 requirement and 15.209 requirement, only if the test result comply with FCC part 15.247 requirement, then the host can be sold legally.

Additional testing, Part 15 Subpart B disclaimer Host manufacturer is responsible for compliance of the host system with module installed with all other applicable requirements for the system such as Part 15B. Additional Testing and Grantee Evaluation for Host Product. The module is limited module and complies with the requirement of FCC Part 15.247. According to FCC Part Subpart C section 15.212, the radio elements must have the radio frequency circuitry shielded. However, Due to there is no shield for this module, this module is granted as a Limited Modular Approval. A C2PC is required for new host application. Only Grantees are permitted to make permissive changes. Please contact us for further process with Tianjin Yolin Technology Co.,Ltd. The OEM integrators should follow the following C2PC test plan, Base on Module RF report "SHCR240900186701 under FCC ID: 2AYOI-YLBLE01.

For the host product installed this module exactly according to this guide, and did not make any hardware or software modifications to this module or modified the software but does not affect the radio characteristics, The host product will need to evaluate according to FCC Part 15 Subpart C 15.247 for Bluetooth: (1). Maximum EIRP of channel 2402MHz-2480 MHz.
3

(2). Radiated spurious emissions and band edge on channel 2402 and 2480MHz with the other co-located transmitters. RF Exposure evaluation for the simultaneous transmission of the co-located transmitters. The host product shall be evaluation for ensuring the continuous compliance for the FCC rules that apply to the host product. Additional guidance for testing host products is provided in KDB Publication 996369 D02 and D04. This module was tested as a subsystem and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to final host. The host will still need to be reassessed for compliance to this portion of rule requirements. For the host product is not installed according to tis guide, the module certification will be invalid, and a new grant certification will be required for the host product.
Contact Information: Company Name: Tianjin Yolin Technology Co.,Ltd. Address: 52-1 Workshop,Yougu New Science Park,Jingfu Road E Pharmaceutical & Medical Devices Industrial Park BEDA, Beichen District, Tianjin, China Contact Email: eng@yolintech.com Contact Phone: 022-86838795
========================================
FCC&IC regulatory compliance statement
§15.19 Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
§15.21 Information to user Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF Exposure compliance statement This Module complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Labelling Instruction for Host Product Integrator Please notice that if the FCC and IC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. For FCC, this exterior label should follow "Contains FCC ID: 2AYOI-YLBLE01". In accordance with FCC KDB guidance 784748 Labeling Guidelines.
§ 15.19 Labelling requirements shall be complied on end user device. Labelling rules for special device, please refer to §2.925, § 15.19 (a)(5) and relevant KDB publications. For E-label, please refer to §2.935.
Installation Notice to Host Product Manufacturer The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module. The module is limited to installation in mobile application, a separate approval is required for all other operating
4

configurations, including portable configurations with respect to §2.1093 and difference antenna configurations.
Antenna Change Notice to Host manufacturer If you desire to increase antenna gain and either change antenna type or use same antenna type certified, a Class II permissive change application is required to be filed by us, or you (host manufacturer) can take responsibility through the change in FCC ID (new application) procedure followed by a Class II permissive change application.
FCC other Parts, Part 15B Compliance Requirements for Host product manufacturer This modular transmitter is only FCC authorized for the specific rule parts listed on our grant, host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification.
Host manufacturer in any case shall ensure host product which is installed and operating with the module is in compliant with Part 15B requirements. Please note that For a Class B or Class A digital device or peripheral, the instructions furnished the user manual of the end-user product shall include statement set out in §15.105 Information to the user or such similar statement and place it in a prominent location in the text of host product manual. Original texts as following: For Class B Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.
For Class A Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
=====================================================
5

Microsoft Word for Microsoft 365