Instruction Manual for WISFOR models including: XM183B96US, XM183B96US Luvodi LED Bathroom Mirrors, Luvodi LED Bathroom Mirrors, LED Bathroom Mirrors, Bathroom Mirrors
Shenzhen Lanbaosi Technology Co.,ltd XM183B96US 2BGP6-XM183B96US 2BGP6XM183B96US xm183b96us
4 4
4 4
Short press for On/Off; long press to adjust brightness; After all the lights are off, long press to turn off the screen, then short press to restore the display.
Short press to switch three color temperature (Cold White, Neutral, Warm Light).
Short press to turn on/ off the defog function. Long press to enter Settings mode, short press to select the next menu, then press and hold again to adjust it. While playing music, double-click to switch to the previous song.
4
Long press to turn on/ off the Bluetooth function, short press to play or pause. Double click to switch to the next song.
Four-Button Digital Display Switch + Wireless Bluetooth Audio Touch Button Description
1.
1.Mode
PAGE/04
22. .Specifications
}2.1~ Input: DC12V }2.2~Strip output: less than 3.3A }2.3~Fog removal output: less than 4.0A }2.4~Input: 100-277V }2.5~ Rated power: 24W-100W
3.Key Icon
}3.1~ The key is defined from left (outlet end) to right: æLight control ç Color temperature control è Anti-fog control é Bluetooth control
æ
ç
è
é
4. Keys operation
}4.1~Key functions
2. Button: Short press to switch three color temperature (Cold White - Neutral - Warm Light).
3. Button: 3.1 Short press
for defog function of on/off, (The little defog icon will appear on the right side of after clicking the on/off button, otherwise the function is in off state.
3.2 Long press to enter Settings mode, short press to select the next menu, then press and hold again to adjust it.
3.3 While playing music, double-click the to switch to the previous song.
4. Button: The little Bluetooth icon will flicker on the right side of the on/off button, otherwise the function is in off state.
4.1Long press the to turn on/ off the Bluetooth function. 4.2Short press the to play or pause. 4.3Double click the to switch to the next song.
after clicking
Settings Description
}1.1~Time Setting The Settings are in the following order: Date(Month), Month(Date), Year, Time, Minute
Long press to enter the Settings mode, then short tap to set the time, the digits on the screen flashing Tap the to change the digits, long tap it to switch to the next option
}1.2~Date Setting (Date - Month - Year or Month - Date - Year) Long press to enter the Settings mode, short press once for date setting option, then long tap to set the date USA: Month - Date - Year EUR: Date - Month - Year }1.3~Hour System Setting (12/24 Hours) Long press to enter the Settings mode, short press twice for hour system setting option, then long tap the to set the hour system, short tap the to switch to 12H or 24H, "AM" and "PM" will display on the screen, then long press the to save and exit. }1.4~Temperature Unit Setting(OF/OC) Long press to enter the Settings mode, short press three times for temperature unit setting option, long tap to enter, then press the to choose Fahrenheit (OF) / Celsius (OC), the unit value on the screen will be changed according to your choice, then long press the to save.
5. Remarks
}5.1~Please use your mobile phone to adjust the volume if you need to adjust it while playing the music.
Detailed Parameters
PAGE/06
06
24w-100w -30¥ to 75¥ 3000k to 6500k
100-277V 12V PSE IP56
80RA
07
Recommend Height
1.When installing the bathroom mirror, please first pick up the bathroom mirror and confirm the best installation height for marking, then punch for installation
2.Make sure your face is in the middle of the mirror for a better image.
Extend the line of the bathroom mirror from the grooves on the side and plug it in to use.
Cut off the plug of bathroom mirror with scissors and connect the reserved thread.
PAGE/08
1.Measure the distance of the bathroom mirror hook.
2.Lidt the bathroom mirror up to confirm the best mounting height.
3.Mark the wall with a pencil.
4.Drill the marks with an electric drill.
5.Drive a screw and an expansion plug into the hole.
6.Hang up the bathroom mirror.
1.Measure the distance of the bathroom mirror hook.
2.Lidt the bathroom mirror up to confirm the best mounting height.
3.Mark the wall with a pencil.
4.Drill the marks with an electric drill.
5.Drive a screw and an expansion plug into the hole.
6.Hang up the bathroom mirror.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
RF Exposure Statement
To maintain compliance with FCC'S RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Adobe Acrobat Pro DC 18.11.20038 Adobe Acrobat Pro DC 18.11.20038