Increased Safety for Hazardous Locations
ATEX/IECEx Compliance: Zone 1 and 2, Zone 21 and 22 | Ex II 2 GD | IP66 - IK09/10
These plugs and receptacles are designed for use with portable or stationary electrical equipment in hazardous environments, including:
Specifically suited for corrosive atmospheres and installations in oil and gas industry zones (Zone 1, 2, 21, 22), such as:
Certification Type PCX (Plug, Socket, Mobile Socket):
Certification Type PCX/EN (Flush Socket):
Ambient Temperature: -40 °C ≤ Ta ≤ +55 °C (-40 °F ≤ Ta ≤ +131 °F)
Index of Protection: According to EN/IEC 60529: IP66
EURASEC Certification:
Other Certification:
INMETRO certification available on special request only. Contact your local sales representative for more information.
| Category | Breaking Capacity |
|---|---|
| AC 3 | 4 kW - 220 V 4.3 kW - 240 V 7.5 kW - 380 V 8.2 kW - 415 V |
| ICC | 20 kA |
Features three M20 threaded entries (one on the top and two on the bottom). Supplied with one M20 cable gland (Ø 6.5 to Ø 14.5 mm) and two M20 blanking plugs. Terminal capacity 2 x 4 mm². Can be through-wired. Fitted with three linked earth terminals.
Image Description: A robust, black wall-mounted socket with threaded entries for cable glands and blanking plugs, and connection terminals.
Features one PG16 integrated cable gland (Ø 6.5 to Ø 14.5 mm). Terminal capacity 2.5 mm².
Image Description: A black, cylindrical plug with a PG16 cable gland, designed for secure connection to a socket.
Features one PG16 integrated cable gland (Ø 6.5 to Ø 14.5 mm). Terminal capacity 2 x 4 mm².
Image Description: A black, compact socket designed for mobile applications, featuring a PG16 cable gland.
Terminal capacity 2 x 4 mm².
Image Description: A black, flush-mounted socket designed for integration into panels or surfaces.
The catalog number is constructed using the following format:
| Component | Description | Example |
|---|---|---|
| IECEx Series | PRE - PRE Series (Zone 1, 2, 21 and 22, ATEX / IECEx) | PRE |
| Pin Configuration | 2 - 2P 3 - 2P+E 4 - 3P+E 5 - 3P+N+E 6 - 3P |
2 |
| Amps | 16 - 16A | 16 |
| Equipment | P - Plug R - Receptacle (Wall Mounting) M - Mobile Socket F - Flush Socket |
R |
| Voltage | P - 20-25 Vac 50/60 Hz W1 - 20-50 Vdc W - 40-50 Vac 50/60 Hz Y - 100-130 Vac 50/60 Hz B - 200-250 Vac 50/60 Hz R - 380-415 Vac 50/60 Hz N - 480-500 Vac 50/60 Hz G - 50-500 Vac 300 to 500 Hz |
P |
Example: PRE216RP = PRE Series, 2-Pin, 16 Amp, Receptacle (Wall Mounting), 20-25 Vac.
The ATX™ PRE Series uses color coding for voltage identification:
ELV: Extra Low Voltage
LV: Low Voltage
| Description | Pin Configuration | Weight kg (lb) | Volume dm³ (in³) | Catalog Number |
|---|---|---|---|---|
| Extra Low Voltage: ELV | ||||
| 20/25 Vac 50/60 Hz - Purple | ||||
| Wall Socket | 2P | 0.6 (1.3) | 3.8 (231.89) | PRE216RP |
| Plug | 2P | 0.2 (0.4) | 0.6 (361.6) | PRE216PP |
| Mobile Socket | 2P | 0.4 (0.9) | 1.3 (79.33) | PRE216MP |
| Flush Socket | 2P | 0.2 (0.4) | 1.3 (79.33) | PRE216FP |
| 20/50 Vdc - White | ||||
| Wall Socket | 2P+E | 0.6 (1.3) | 3.8 (231.89) | PRE316RP |
| Plug | 2P+E | 0.2 (0.4) | 0.6 (36.61) | PRE316PP |
| Mobile Socket | 2P+E | 0.4 (0.9) | 1.3 (79.33) | PRE316MP |
| Flush Socket | 2P+E | 0.2 (0.4) | 1.3 (79.33) | PRE316FP |
| 40/50 Vac 50/60 Hz - White | ||||
| Wall Socket | 3P | 0.6 (1.3) | 3.8 (231.89) | PRE616RP |
| Plug | 3P | 0.2 (0.4) | 0.6 (36.61) | PRE616PP |
| Mobile Socket | 3P | 0.4 (0.9) | 1.3 (79.33) | PRE616MP |
| Flush Socket | 3P | 0.2 (0.4) | 1.3 (79.33) | PRE616FP |
| Low Voltage: LV | ||||
| 100/130 Vac 50/60 Hz - Yellow | ||||
| Wall Socket | 2P+E | 0.6 (1.3) | 3.8 (231.89) | PRE316RY |
| Plug | 2P+E | 0.2 (0.4) | 0.6 (36.61) | PRE316PY |
| Mobile Socket | 2P+E | 0.4 (0.9) | 1.3 (79.33) | PRE316MY |
| Flush Socket | 2P+E | 0.2 (0.4) | 1.3 (79.33) | PRE316FY |
| 200/250 Vac 50/60 Hz - Blue | ||||
| Wall Socket | 2P+E | 0.6 (1.3) | 3.8 (231.89) | PRE316RB |
| Plug | 2P+E | 0.2 (0.4) | 0.6 (36.61) | PRE316PB |
| Mobile Socket | 2P+E | 0.4 (0.9) | 1.3 (79.33) | PRE316MB |
| Flush Socket | 2P+E | 0.2 (0.4) | 1.3 (79.33) | PRE316FB |
| 200/250 Vac 50/60 Hz - Blue (Continued) | ||||
| Wall Socket | 3P+E | 1.5 (3.3) | 4.7 (286.81) | PRE416RB |
| Plug | 3P+E | 0.6 (1.3) | 0.6 (361.6) | PRE416PB |
| Mobile Socket | 3P+E | 0.6 (1.3) | 4.0 (244.09) | PRE416MB |
| Flush Socket | 3P+E | 0.2 (0.4) | 1.3 (79.33) | PRE416FB |
| Wall Socket | 3P+N+E | 1.6 (3.5) | 4.7 (286.81) | PRE516RB |
| Plug | 3P+N+E | 0.3 (0.7) | 1.3 (79.33) | PRE516PB |
| Mobile Socket | 3P+N+E | 0.6 (1.3) | 4.0 (244.09) | PRE516MB |
| Flush Socket | 3P+N+E | 0.2 (0.4) | 1.3 (79.33) | PRE516FB |
| 380/415 Vac 50/60 Hz - Red | ||||
| Wall Socket | 3P+E | 1.5 (3.3) | 4.7 (286.81) | PRE416RR |
| Plug | 3P+E | 0.2 (0.4) | 0.6 (361.6) | PRE416PR |
| Mobile Socket | 3P+E | 0.6 (1.3) | 4.0 (244.09) | PRE416MR |
| Flush Socket | 3P+E | 0.3 (0.7) | 1.3 (79.33) | PRE416FR |
| Wall Socket | 3P+N+E | 1.6 (3.5) | 4.7 (286.81) | PRE516RR |
| Plug | 3P+N+E | 0.3 (0.7) | 1.3 (79.33) | PRE516PR |
| Mobile Socket | 3P+N+E | 0.6 (1.3) | 4.0 (244.09) | PRE516MR |
| Flush Socket | 3P+N+E | 0.3 (0.7) | 1.3 (79.33) | PRE516FR |
| 480/500 Vac 50/60 Hz - Black | ||||
| Wall Socket | 3P+E | 1.5 (3.3) | 4.7 (286.81) | PRE416RN |
| Plug | 3P+E | 0.2 (0.4) | 0.6 (361.6) | PRE416PN |
| Mobile Socket | 3P+E | 0.6 (1.3) | 4.0 (244.09) | PRE416MN |
| Flush Socket | 3P+E | 0.3 (0.7) | 1.3 (79.33) | PRE416FN |
| 50/500 Vac 300/500 Hz - Green | ||||
| Wall Socket | 3P+N+E | 1.6 (3.5) | 4.7 (286.81) | PRE516RG |
| Plug | 3P+N+E | 0.2 (0.4) | 0.6 (361.6) | PRE516PG |
| Mobile Socket | 3P+N+E | 0.6 (1.3) | 4.0 (244.09) | PRE516MG |
| Flush Socket | 3P+N+E | 0.3 (0.7) | 1.3 (79.33) | PRE516FG |
Diagram shows a wall mounting socket with dimensions labeled in millimeters (inches) for height, width, depth, and mounting hole spacing.
| Dimension | Value (mm) | Value (in) |
|---|---|---|
| Height | 272.0 | 10.71" |
| Width | 120.0 | 4.72" |
| Depth | 82.5 | 3.25" |
| Mounting Hole Spacing (Vertical) | 202.0 | 7.95" |
| Mounting Hole Spacing (Horizontal) | 125.0 | 4.92" |
| Cable Entry Height | 65.0 | 2.56" |
| Blanking Plug/Gland Diameter | 5.5 | 0.22" |
Diagram shows a plug with dimensions labeled in millimeters (inches) for length and diameter.
| Dimension | Value (mm) | Value (in) |
|---|---|---|
| Length | 152.0 | 5.98" |
| Diameter | 49.5 | 1.95" |
Diagram shows a mobile socket with dimensions labeled in millimeters (inches) for length, width, depth, and mounting thickness. It indicates it can be mounted on a panel up to 3.0 mm (0.12") thick.
| Dimension | Value (mm) | Value (in) |
|---|---|---|
| Length | 130.0 | 5.12" |
| Width | 54.0 | 2.13" |
| Depth | 42.0 | 1.65" |
| Mounting Hole Diameter | 39.0 | 1.54" |
| Mounting Hole Clearance | 4.2 | 0.17" |
| Maximum Panel Thickness | 3.0 | 0.12" |
Diagram shows a flush socket with dimensions labeled in millimeters (inches) for length, width, depth, and mounting hole diameter.
| Dimension | Value (mm) | Value (in) |
|---|---|---|
| Length | 160.0 | 6.30" |
| Width | 54.0 | 2.13" |
| Depth | 46.0 | 1.81" |
| Mounting Hole Diameter | 39.0 | 1.54" |
| Mounting Hole Clearance | 4.2 | 0.17" |
Diagram shows a wall mounting socket for 3P+E and 3P+N+E configurations, with dimensions labeled in millimeters (inches).
| Dimension | Value (mm) | Value (in) |
|---|---|---|
| Height | 240.0 | 9.45" |
| Width | 145.0 | 5.71" |
| Depth | 97.0 | 3.82" |
| Mounting Hole Spacing (Vertical) | 140.0 | 5.51" |
| Mounting Hole Spacing (Horizontal) | 80.0 | 3.15" |
| Fixing Hole Diameter | 6.0 | 0.24" |
Diagram shows plugs for 3P+E and 3P+N+E configurations, with dimensions labeled A, B, C in millimeters (inches).
| Configuration | A (mm/in) | B (mm/in) | C (mm/in) |
|---|---|---|---|
| 3P+E | 66.0 (2.60) | 154.0 (6.06) | 55.5 (2.19) |
| 3P+N+E | 73.0 (2.87) | 166.0 (6.54) | 62.0 (2.44) |
Diagram shows a mobile socket for 3P+E and 3P+N+E configurations, with dimensions labeled in millimeters (inches). It indicates it can be mounted on a panel up to 3.0 mm (0.12") thick.
| Dimension | Value (mm) | Value (in) |
|---|---|---|
| Length | 150.0 | 5.91" |
| Width | 68.0 | 2.68" |
| Depth | 76.0 | 3.00" |
| Mounting Hole Diameter | 49.5 | 1.95" |
| Mounting Hole Clearance | 4.2 | 0.17" |
| Maximum Panel Thickness | 3.0 | 0.12" |
Diagram shows a flush socket for 3P+E and 3P+N+E configurations, with dimensions labeled in millimeters (inches).
| Dimension | Value (mm) | Value (in) |
|---|---|---|
| Length | 160.0 | 6.30" |
| Width | 56.0 | 2.20" |
| Depth | 60.0 | 2.36" |
| Mounting Hole Diameter | 49.5 | 1.95" |
| Mounting Hole Clearance | 4.2 | 0.17" |
Description: M5 earth stud with black neoprene sealing washer and green/yellow earth conductor, length 300 mm (11.8").
Catalog Number: PREESTM20
Description: M20 earth continuity adaptor with black neoprene sealing washer and green/yellow earth conductor, length 300 mm (11.8").
Catalog Number: PREECAM20
 |
Appleton ATX FNLED Series: Nonmetallic LED Luminaires for Hazardous Locations Discover the Appleton ATX FNLED Series, high-performance nonmetallic LED luminaires designed for standard and emergency lighting in hazardous environments. Featuring ATEX/IECEx certification for Zone 2 and 22, IP66/IK10 protection, and robust construction, these luminaires are ideal for industrial applications in refineries, petrochemical plants, and more. |
 |
Soluciones de Iluminación LED Appleton para Entornos Exigentes Descubra las luminarias LED Appleton de Emerson, diseñadas para ofrecer iluminación superior y fiabilidad en entornos industriales peligrosos y adversos. Explore la gama completa de productos, especificaciones y certificaciones. |