Please read the entire manual before starting to assemble and/or using this product. Follow the manual thoroughly and keep it for further reference.
Avoid Scratches! In order to avoid scratching, this furniture should be assembled on a soft layer, such as a rug.
Improve Efficiency! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time.
Anti-Topple Warning! Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure to use the wall attachment, if not included with this product. Please purchase the wall attachment that fits your wall. If unsure, seek professional advice. Please read and follow each step of the instructions carefully.
Important! It is important that any product assembled using any kind of screw is re-tightened 2 weeks after assembly, and once every 3 months, to assure stability throughout the lifespan of the product.
For regular maintenance and cleaning of the product: for the frame, use a rag dipped in neutral detergent to fully wipe it, and then dry it with a clean rag. For glass materials, wipe with a rag dampened with water glass cleaner, and then dry with a dry rag. Do not use an electric screwdriver, and do not use too much force when installing, as the board is easy to break.
An exploded view diagram shows the main components of the TV table. The main top panel is labeled '1'. The bottom panel is labeled '2'. Side panels are labeled '3'. Internal vertical dividers are labeled '4', '5', '6', '7', '8', '9'. The doors are labeled '10' and feature slatted designs labeled '11'. Various connecting pieces and legs are also shown with labels '12' through '18'.
The following parts are included:
Please prepare the following tools:
[Tape Measure] [Pencil] [Screwdriver (Phillips)] [Screwdriver (Flathead)] [Power Drill]
When installing, please carefully confirm whether each screw corresponds to the manual; accessories with similar shapes can be distinguished by size.
Screw cam bolts (B) into the designated holes on panels (2), (14), (15), and (18).
Diagram Description: Shows cam bolts (B) being screwed into panels. Two sub-diagrams illustrate panels (15) and (14) with multiple cam bolts inserted. A note indicates that cam bolts and insert nuts should be assembled together.
(Attention: Cam bolt & Insert nut need to be put together)
Attach panels (14) and (15) to panel (18) and secure using cam bolts (A).
Attach panels (12) and (17) to panels (14), (15), and (18), securing them with cam bolts (A) and wood dowels (C).
Diagram Description: Illustrates the assembly of the base frame. Panels (14) and (15) are connected to panel (18) using cam bolts (A) and dowels (C). Subsequently, panels (12) and (17) are attached to this structure, also secured with cam bolts (A) and dowels (C).
Attach the bottom panel (2) to the assembled structure (panels 12, 14, 15, 17, 18) and secure with cam bolts (A) and wood dowels (C).
Attach the rear support panel (16) to the bottom panel (2) and secure with cam bolts (A).
Diagram Description: Depicts the attachment of the bottom panel (2) to the main frame using cam bolts (A) and dowels (C). Following this, panel (16) is affixed to panel (2) using cam bolts (A).
Apply the pads (K) to the bottom of the furniture legs.
Screw the adjustable foot (J) into the designated hole on panel (16).
Diagram Description: Illustrates pads (K) being attached to the feet. An adjustable foot (J) is shown being screwed into panel (16).
Attach the vertical divider panels (3), (4), (5), and (6) to the bottom panel (2), securing them with cam bolts (A) and wood dowels (C).
Apply the keyhole covers (L) to the corresponding keyholes.
Diagram Description: Shows the internal vertical panels (3, 4, 5, 6) being connected to the bottom panel (2) using cam bolts (A) and dowels (C). Keyhole covers (L) are also shown being placed over specific holes.
Insert the horizontal shelf panels (13) into the pre-cut grooves.
Diagram Description: Illustrates the insertion of horizontal shelf panels (13) into the grooves of the vertical dividers.
Screw cam bolts (B) into the top panel (1).
Adhere the LED strip to the top panel (1).
Fasten the LED strip securely using the provided buckles.
Diagram Description: Shows cam bolts (B) being installed on the top panel (1). An LED strip is then shown being attached to this panel, followed by securing it with buckles. A note reiterates that cam bolts and insert nuts should be assembled together.
(Attention: Cam bolt & Insert nut need to be put together)
Attach the top panel (1) to the vertical dividers (3), (4), (5), and (6), securing it with cam bolts (A) and wood dowels (C).
Apply the keyhole covers (L) to the corresponding keyholes.
Diagram Description: Depicts the top panel (1) being fitted onto the main structure and fastened with cam bolts (A) and dowels (C). Keyhole covers (L) are also shown being applied.
Insert the layer pins (H) into the pre-drilled holes on the inner sides of panels (3), (4), (5), and (6).
Place the shelf panels (7), (8), and (9) onto the inserted layer pins as illustrated.
Diagram Description: Shows layer pins (H) being inserted into the vertical panels. Shelf panels (7), (8), and (9) are then positioned onto these pins.
Install the feet (E) onto the back of the door panels (10) using screws (G).
Install the feet (F) onto the slatted door panels (11) using screws (G).
Diagram Description: Illustrates the attachment of feet (E) to door panels (10) and feet (F) to slatted panels (11), both using screws (G).
Attach the door panels (10) and slatted panels (11) to the main unit's frame (panels 3, 4, 5) using screws (G).
Diagram Description: Shows the doors (10) and slatted panels (11) being mounted onto the main structure using screws (G).
Install the handles (D) onto the door panels (10) and slatted panels (11) using the provided bolts.
Diagram Description: Illustrates the attachment of handles (D) to the doors (10) and slatted panels (11) using bolts.
Insert the buckles (I) into the designated back slots of the unit.
Secure the buckles (I) in place using screws (G) as shown.
Diagram Description: Depicts buckles (I) being inserted into the rear slots of the TV table and then fastened with screws (G).
The LED strip kit (M) includes the LED strip, a power adapter, and a control box.
Diagram Description: Shows the components of the LED strip kit (M): the LED strip, power adapter, and control box, ready for connection.
The LED lamp has an effective remote control distance of 5 meters.
Diagram Description: The process involves removing a protective gasket from the remote control, then demonstrating how to point the remote at the control box to change settings.
- Installation complete.
The controller offers:
Important Notes:
| Dynamic mode | 22 modes |
| Static Color | 20 colors |
| PWM Grade | 256 levels |
| Brightness Grade | 5 levels |
| Speed Grade | 10 levels |
| Demo mode | Yes |
| Direct color Select | Yes |
| Output Color Swichable | Yes, 6 options |
| Working Voltage | DC5~24V |
| Output Current | 3x2A constant |
| Remote frequency | 433.92MHz |
| Remote distance | >15m at open area |
 |
TV Table DJ0468BK Assembly Instructions Assembly instructions for the TV Table DJ0468BK, including parts list, tool requirements, and step-by-step assembly guide with safety warnings. |