GE Universal Remote User's Manual

Setup

Your universal remote requires two (2) AA batteries (not included). Alkaline batteries are recommended.

Battery Installation

1. Press and slide battery cover downward to remove.
2. Insert the batteries making sure to match the (+) and (-) polarity inside the compartment.
3. Slide battery cover back into place.

Note: If your remote is not operating properly, replace the batteries with new ones.

Battery Precautions

• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (Ni-Cd, Ni-MH, etc.) batteries.
• Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with local and national regulations.

Battery Saver

Your remote automatically turns off if the buttons are held down for more than 8 seconds. This saves battery life if your remote gets stuck in a place where the buttons remain depressed (e.g. between the sofa cushions).

Code Saver

You have up to 10 minutes to change the batteries in your remote without losing the codes you have programmed.

Button Functions

• 1. Power: [power button] - Turns devices ON/OFF
• 2. Input: [input button] - Selects video input
• 3. Device buttons: [TV button], [CBL button], [DVD button], [AUD button] - Select the device to control
• 4. Playback Controls: [record button], [play button], [stop button], [rewind button], [fast forward button], [pause button]
• 5. Setup: [setup button] - Used to program the remote
• 6. ABCD: [ABCD buttons] - Access additional features for DVDs, cable and satellite receivers
• 7. Home: [home button] - Access streaming or Guide on cable and satellite receivers
• 8. Menu: [menu button] - Display on-screen menu
• 9. OK: [OK button] - Accesses menu for selected device
• 10. Navigation: [up arrow], [down arrow], [left arrow], [right arrow]
• 11. Exit: [exit button] - Exits the on-screen menu
• 12. Info: [info button] - Displays on-screen content information
• 13. Mute: [mute button] - Mutes sound
• 14. Volume: [volume up], [volume down]
• 15. Channel: [channel up], [channel down]

Direct Code Entry

Direct code entry is recommended for quick and easy programming.

1. In the Code List (included with remote), circle the 4-digit codes for the type and brand of device you wish to control.
2. Press and hold down [setup button] until the remote's red light turns on.
3. Press and release the chosen device button (for example [TV button], [CBL button], [DVD button], [AUD button]). The red light will blink once and remain on.
4. Enter the first 4-digit code circled in Step 1. The red light will turn off.
5. Point the remote at the device and test the buttons. If they don't work as expected, repeat Steps 2-5 with the next circled code.
6. Repeat the process for each device you wish to control.

Troubleshooting

Remote does not operate your device

• Make sure the batteries are fresh and installed correctly.
• Aim the remote directly at your device and make sure there are no obstructions between the remote and the device.
• Make sure you select the appropriate device on the remote you wish to control (TV for TV, CBL for cable box, etc.).
• Try programming the remote with a different code. See Direct Code Entry section.
• Remote may not be compatible with your device.

Remote does not operate some features of your device

• Sometimes a particular code might operate a few features but not all. Try programming the remote with a different code from the Code List. See Direct Code Entry section.

Device Code Lists

DVD Player

Blu-ray Player

Sound Bar

TV

Streamer