Pro1 T601-2 Thermostat Operation Manual

Introduction

⚠️ Equipment damage hazard. Do not operate the cooling system if the outdoor temperature is below 50 °F (10 °C) to prevent possible compressor damage.

This manual provides essential information for operating your Pro1 T601-2 thermostat. A Spanish version of this manual is available for download on the company website.

Thermostat Operation

The Pro1 T601-2 thermostat allows you to control your home's heating and cooling system. The main components are:

• LCD Display: Shows current temperature and setpoint.
• Fan Switch: Controls the fan operation. Options are 'ON' for continuous fan operation or 'AUTO' to cycle the fan only when the heating or cooling system is active.
• System Switch: Selects the operating mode of your HVAC system. Options include 'HEAT' to activate heating, 'COOL' to activate cooling, and 'OFF' to disable both heating and cooling.
• Temperature Setpoint Buttons: Use the '+' and '-' buttons to adjust the desired room temperature.
• Easy change battery door: Located at the bottom, provides access to the battery compartment.

The thermostat features a digital LCD display showing 'Temperature' and 'Set At' values. Below the display are controls labeled 'FAN' with options 'ON' and 'AUTO', and 'SYSTEM' with options 'COOL', 'OFF', and 'HEAT'. To the right of the display are '+' and '-' buttons for adjusting the set temperature. A small panel at the bottom is labeled 'Easy change battery door'.

Thermostat Quick Reference

Battery Door Information

The battery compartment is accessed by a finger bevel on the lower portion of the thermostat. It requires 2 AA Alkaline Batteries. High-quality alkaline batteries are recommended.

Simple operating instructions are also found on the back of the battery door.

Important Battery Notes

⚠️ When the battery icon ? appears, replace your AA batteries immediately. Failure to do so may result in your heating & cooling system becoming inoperable. Freezing or overheating can occur.

Low Battery Indicator: Replace batteries when the indicator is shown.

The low battery indicator is displayed when the AA battery power is low. If the user fails to replace the battery within 21 days, the screen will only show the low battery indicator but maintain all functionality. If the user fails to replace the batteries after an additional 21 days (days 22-42 since first "low battery" display), the setpoints will change to 55°F (Heating) and 85°F (Cooling). If the user adjusts the setpoint away from either of these, it will hold for 4 hours then return to either 55°F or 85°F. After day 63, the batteries must be replaced immediately to avoid freezing or overheating because the thermostat will shut the unit off until the batteries are changed.

System Operation Indicators

The 'ON' indicator will display when the COOL or HEAT system is active.

Display Indicators

The thermostat display shows the current room temperature on the left side. The right side displays the selected setpoint temperature.

Warranty Information

Warranty Registration

Your new thermostat has a 5-year limited warranty. You must register your thermostat within 60 days of installation. Without this registration, the warranty period will begin on the date of manufacture.

For warranty issues, please contact the HVAC professional that installed this product.

You can register your new thermostat in 2 ways:

Online Registration

Go to the company website, select 'warranty registration', and fill out a short registration form.

Mail Registration

Complete the form below and mail it to the address shown.

Warranty Registration Form:

Complete form and mail to:

Thermostat Warranty Registration
PO Box 3377
Springfield, MO 65804

[Cut out this section for Warranty Registration] ✂️