PeakTech Data Logger Software Installation
Software Installation (German)
Note: For new versions from SN 230324, no driver installation is required as the data logger is recognized as an external drive and automatically installed with system drivers. Data can only be evaluated via the software.
To put the data logger into operation, first copy the contents of the enclosed CD to your PC. Alternatively, you can download the software from our homepage as a zip archive and extract the software folder.
Download links:
- https://www.peaktech.de/article/P+5185
- https://www.peaktech.de/article/P+5186
- https://www.peaktech.de/article/P+5187
The Software DE folder on the CD or in the zip archive corresponds to the German version. Languages that are not required do not need to be copied.
In the Software DE folder, double-click the file Setup.exe
and follow the setup instructions. The extracted folder can be deleted after a successful installation.
- program files
- 0x0409.ini
- Datenlogger.msi
- setup.exe
- Setup.ini
Software Installation (English)
Note: No driver installation is required for the new version from SN 230324, as the data logger is recognized as an external drive and automatically installed with system drivers. However, data can only be analyzed via the software!
To put the data logger into operation, first copy the contents of the enclosed CD to your PC. Alternatively, you can download the software from our homepage as a zip archive and unzip the software folder.
Download links:
- https://www.peaktech.de/article/P+5185
- https://www.peaktech.de/article/P+5186
- https://www.peaktech.de/article/P+5187
The Software EN folder on the CD or in the zip archive corresponds to the English version. Languages that are not required do not need to be copied.
Double-click the Setup.exe
file in the Software EN software folder and follow the setup instructions. The unpacked folder can be deleted after a successful installation.
- program files
- 0x0409.ini
- Datenlogger.msi
- setup.exe
- Setup.ini
Installation du logiciel (Français)
Remarque : Avec la nouvelle version à partir de SN 230324, il n'est pas nécessaire d'installer de pilote, car l'enregistreur de données est reconnu comme un lecteur externe et installé automatiquement avec des pilotes système. Les données ne peuvent toutefois être analysées que via le logiciel !
Pour mettre en service l'enregistreur de données, il faut d'abord copier le contenu du CD joint sur votre PC. Vous pouvez également télécharger le logiciel sur notre site Internet sous forme d'archive zip et décompresser le dossier du logiciel.
Liens de téléchargement :
- https://www.peaktech.de/article/P+5185
- https://www.peaktech.de/article/P+5186
- https://www.peaktech.de/article/P+5187
Le dossier Software FR sur le CD ou dans l'archive zip correspond à la version allemande. Les langues non utilisées ne doivent pas être copiées.
Dans le dossier du Software FR, double-cliquez sur le fichier Setup.exe
et suivez les instructions du programme d'installation. Le dossier du logiciel décompacté peut être supprimé après une installation réussie.
- program files
- 0x0409.ini
- Datenlogger.msi
- setup.exe
- Setup.ini