User Manual for EDCO models including: BTSPK166, BTSPK166 Wireless LED Speaker, Wireless LED Speaker, LED Speaker, Speaker
Edco Electronics Inc. SPK1288 WIRELESS LED SPEAKER 2AJMW-SPK1288 2AJMWSPK1288 spk1288
SPEAKER USER MANUAL MODEL NO.: BTSPK166 PMN:WIRELESS LED SPEAKER HVIN:BTSPK166 ACCESSORIES Power supply cable: 1PCS Unser manual: 1PCS SPECIFICATIONS Operation range: 10M Battery: built-in rechargeable 1200mAh Lithium-ion Output power: 5W*2 Input voltage: DC 5V Frequency response: 100Hz-20KHz Loudspeaker: 3inch 5W Distortion: 10% S/N ratio: 80dB Multimedia input: Micro SD/USB FM frequency range: 87.5-108.0Mhz DESCRIPTION OF PARTS 1. Power ON/OFF 2. Micro SD(TF) card slot 3. USB slot 4. Charging port 5. LED button 6. M button 7. Previous track / Vol8. Play/Pause 9. Next track / Vol+ WIRELESS Turn on the speaker and it will come into the wireless mode directly. After pairing the device, it can play the music. Press "ll" button to Play/Pause. Short press " " or " " button to be previous track or next track, long press " " or " " button to increase or decrease the Volume. USB/TF Card Insert the U flash memory or Micro-TF card into the USB/TF slot, KTX-1475 will read the MP3 format music automatically. Press ll button to Play/Pause, press " " or " " button to previous track and next track. FM RADIO Press ll to search FM channels automatically. This operation will scan all FM stations and Pre-record them to memory. The scan procedure will take several minutes and cannot be interrupted. Once completed, you can short press " " or " button to move forward or backward. Long press " " or " button to increase or decrease the Volume. TWS Two same unit speakers, turn on them first, choose one unit and long press its "M'' button for several seconds, when you listened the sound of "Ding-tong'', that is to say the two units have already paired well. Please ensure before pairing the two units have not connected with other devices. CHARGING Plug the USB cable into the speaker's charging port and connect to the power source. The red LED indicator on panel will be lit when the unit is charging. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC Warning -English: This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES 003 (B)/NMB 3(B). - French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditionssuivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateurde l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi lebrouillageest susceptible d'encompromettre le fonctionnement. L'appareil numérique est conforme à la canadienne CAN ICES 003 (B)/NMB 3(B). This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Ce matériel est complété par une exposition de rayonnements ISED pour un environnement naturel. Ce matériel doit être installé et se faire avec une distance minimale de 20cm entre les radiateurs et les autresYour body shop.WPS 文字 PDFsharp 1.50.5147 (www sharp.com)