Toro 22in Recycler® Lawn Mower Parts Catalog
Form No. 3375-445 Rev B
Model No. 20334 — Serial No. 313000001 and Up
Register at www.Toro.com.
Ordering Replacement Parts
To order replacement parts, please supply the part number, the quantity, and the description of each part desired.
Understanding Reference Numbers
Each identified part in an illustration has a reference number. The reference number for a part also appears in the parts list, along with other information about the part.
This catalog uses two special reference number formats, one to indicate parts in a service assembly and another to indicate the quantity of a given part in an illustration.
Service Assembly Reference Numbers
Parts in service assemblies have reference numbers in the form a:b. The 'a' represents the reference number of the entire service assembly and the 'b' represents a sequential number unique to each part within the service assembly.
For example, a wheel assembly might be identified by reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1, 6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustrations and in parts lists.
Reference Numbers Indicating Quantity
In an illustration, if a reference number indicates more than one part, the reference number has the form nX y. The 'n' represents the quantity of the part, the 'X' is the multiplication symbol, and the 'y' represents the reference number.
For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated.
Contents
This document is organized into the following sections:
- Deck, Side Chute and Rear Door Assembly (Page 4)
- Rear Bag Assembly (Page 5)
- Engine and Blade Assembly (Page 6)
- Front Wheel and Height-of-Cut Assembly (Page 7)
- Transmission and Rear Wheel Drive Assembly (Page 8)
- Handle Assembly (Page 9)
- Electrical Assembly (Page 10)
- Attachments and Accessories (Page 11)
Deck, Side Chute and Rear Door Assembly
This section details the Deck, Side Chute, and Rear Door Assembly. The accompanying diagram visually represents the main deck structure of the lawn mower, showing how the front and rear baffles, side discharge chute, and rear door are attached. It also illustrates the placement of various decals, springs, and fasteners that hold these components together.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 117-1084 | 1 | Housing ASM |
| 1:2 | 94-8072 | 1 | Decal-Danger |
| 1:3 | 115-4676 | 1 | Decal-Recycler |
| 1:4 | 112-8867 | 1 | Decal-Port, Washout |
| 2 | 114-7963-01 | 1 | Baffle-Front |
| 5 | 114-7961 | 1 | Baffle-Rear |
| 6 | 114-7957 | 1 | Chute-Recycle |
| 7 | 46-8091 | 9 | Screw-HWH |
| 8 | 112-6416 | 1 | Bracket-Cover |
| 9 | 99-8445 | 2 | Screw-HWH |
| 10 | 99-5291 | 1 | Rod-Cover |
| 11 | 99-5293 | 1 | Spring-Torsion |
| 12 | 115-8449 | 1 | Deflector-Side |
| 13 | 115-8447 | 1 | Chute-Discharge, Side |
| 14 | 114-7960 | 1 | Deflector-Recycle |
| 15 | 114-7958 | 1 | Knob-Recycle |
| 16 | 114-7959 | 1 | Latch-Recycle |
| 17 | 117-1031 | 1 | Spring-Compression |
| 18 | 32104-120 | 2 | Screw-PPH |
| 19 | 121-5776 | 1 | Rear Door ASM |
| 19:2 | 114-7982 | 1 | Decal-Warning |
| 20 | 115-2859 | 1 | Spring-Torsion |
| 21 | 114-7924 | 1 | Spring-Torsion |
| 22 | 112-6400 | 1 | Port-Washout |
| 23 | 112-6401 | 1 | Coupling-Hose, Washout Port |
| 25 | 112-6438 | 1 | Washer-Seal, Washout Port |
| 26 | 3254-5 | 1 | Washer-Tooth, Internal |
| 27 | 3218-6 | 1 | Nut-Jam |
| 29 | 114-7987 | 1 | Bumper |
| 30 | 105-6849 | 2 | Screw-Forming, Thread |
| 34 | 117-5928 | 1 | Decal-Bag On Demand |
Rear Bag Assembly
This section covers the Rear Bag Assembly. The diagram shows the components that make up the grass collection system, specifically the frame that attaches to the mower and the bag itself, which collects grass clippings.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 114-2679-03 | 1 | Frame-Bag |
| 2 | 115-4673 | 1 | Grass Bag ASM |
Engine and Blade Assembly
This section focuses on the Engine and Blade Assembly. The diagram illustrates the primary power unit of the lawn mower, featuring the Briggs & Stratton engine, the blade, the blade driver, and the support structure. It also shows the belt guard, belt, and related screws and decals. Parts can be obtained from www.briggsandstratton.com.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 128M05-0026-F1 | 1 | Engine-Briggs |
| 5 | 106-3999 | 1 | Spacer-Driver |
| 6 | 106-3987 | 1 | Driver-Blade |
| 7 | 108-9764-03 | 1 | Blade-22 Inch |
| 8 | 108-3766-03 | 1 | Support-Blade |
| 9 | 125-2466 | 1 | Bolt-Blade |
| 10 | 105-3030-03 | 1 | Guide-Belt |
| 11 | 95-1726 | 3 | Screw-Taptite |
| 12 | 114-7937 | 1 | Cover-Belt |
| 13 | 46-8091 | 2 | Screw-HWH |
| 14 | 2210-316 | 1 | Stop-Rope |
| 16 | 121-2371 | 1 | Decal-Shroud |
| 19 | 117-2718 | 1 | Decal-Arrester, Spark |
Front Wheel and Height-of-Cut Assembly
This section describes the Front Wheel and Height-of-Cut Assembly. The diagram shows one of the front wheels and the mechanism used to adjust the lawn mower's cutting height. This includes pivot arms, knobs, bushings, and fasteners that allow for easy height adjustment.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 115-1956-03 | 2 | Plate-HOC, Front |
| 2 | 322-3 | 4 | Screw-HH |
| 3 | 3296-29 | 6 | Nut-Lock, NI |
| 4 | 105-1818 | 2 | Bushing-Mount, HOC |
| 5 | 105-1807 | 2 | Arm-Pivot, Front |
| 6 | 105-1809 | 2 | Arm-Spring |
| 7 | 110-0549 | 2 | Knob-HOC |
| 8 | 105-3048 | 2 | Washer-Flat |
| 9 | 322-6 | 2 | Screw-HH |
| 10 | 40-1940 | 2 | Washer |
| 11 | 614650 | 2 | Bolt-Shoulder |
| 12 | 115-2894 | 2 | 8 Inch Wheel ASM |
Transmission and Rear Wheel Drive Assembly
This section details the Transmission and Rear Wheel Drive Assembly. The diagram illustrates the components responsible for propelling the lawn mower, including the transmission unit, drive gears, rear wheel assemblies, and associated mounting plates, retainers, and fasteners.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 114-7955-03 | 1 | Plate-Rear, LH (HOC) |
| 2 | 114-7956-03 | 1 | Plate-Rear, RH (HOC) |
| 3 | 322-3 | 4 | Screw-HH |
| 4 | 3296-29 | 4 | Nut-Lock, NI |
| 5 | 108-9779 | 2 | Retainer-Bushing, HOC |
| 6 | 104-8699 | 2 | Bearing-Ball |
| 7 | 108-9782 | 2 | Bushing-Sleeve |
| 8 | 108-9781 | 2 | Arm-Pivot, Rear |
| 9 | 108-9780 | 2 | Arm-Spring |
| 10 | 110-0549 | 2 | Knob-HOC |
| 11 | 115-4652 | 1 | Transmission |
| 12 | 115-4669 | 1 | Belt-V |
| 13 | 114-7977-03 | 1 | Bracket-Transmission |
| 14 | 108-7476 | 3 | Screw-Plastite |
| 15 | 110-7191 | 2 | Washer-Thrust |
| 16 | 115-4668 | 2 | Gear-Pinion |
| 17 | 32151-61 | 2 | Ring-Retaining |
| 18 | 110-1792 | 2 | Wheel Cover ASM |
| 18:2 | 614426 | 1 | Washer-Stepped |
| 19 | 614650 | 2 | Bolt-Shoulder |
| 20 | 115-4695 | 2 | 8 Inch Wheel Gear ASM |
| 21 | 115-8406 | 2 | Anchor-Bag |
| 22 | 105-9437 | 2 | Screw-PPH |
| 23 | 120-7012 | 1 | Shield-Trailing |
| 24 | 117-1092 | 2 | Screw-PTH |
Handle Assembly
This section covers the Handle Assembly. The diagram shows the main handle structure, including the control bar, traction lever, brake bail, and associated cables and guides. It also depicts the handle control mechanism and fasteners.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 1 | 119-3810-05 | 1 | Handle |
| 2 | 3230-6 | 2 | Screw-CARR |
| 3 | 117-5976 | 2 | Knob-Handle |
| 4 | 114-7988 | 1 | Guide-Cable |
| 5 | 86-9671 | 1 | Guide-Rope |
| 6 | 3296-73 | 2 | Nut-Lock, NI |
| 7 | 3256-1 | 1 | Washer-Flat |
| 8 | 105-6842 | 1 | Guide-LH |
| 9 | 105-6841 | 1 | Guide-RH |
| 12 | 104-8678 | 1 | Handle-Control |
| 13 | 117-1019 | 1 | Decal |
| 14 | 99-1588 | 1 | Bar-Control, Traction |
| 15 | 3256-23 | 1 | Washer-Plain |
| 16 | 99-1589 | 1 | Lever-Traction |
| 17 | 121-9118 | 1 | Spring-Torsion |
| 18 | 104-8679-03 | 1 | Bail-Brake |
| 20 | 99-5239 | 1 | Anchor-Cable |
| 21 | 115-8435 | 1 | Cable-Traction |
| 22 | 115-8437 | 1 | Cable-Brake |
Electrical Assembly
This section details the Electrical Assembly. The diagram illustrates the mower's electrical system, including the battery tray, wet battery, battery cover, wiring harness, fuse, and various switches (housing, button, push button). It also shows the battery charger and associated fasteners.
| Ref. | Part Number | Qty. | Description |
|---|---|---|---|
| 5 | 125-5023 | 1 | Harness-Wire |
| 5:1 | 99-6124 | 1 | Fuse-40 Amp |
| 6 | 114-7936 | 1 | Tray-Battery |
| 7 | 106-8397 | 1 | Battery-Wet |
| 9 | 120-3329 | 1 | Cover-Battery |
| 10 | 32144-97 | 1 | Screw-PPH, Plastite |
| 12 | 104-7953 | 1 | Decal-Warning |
| 13 | 114-1588 | 1 | Charger-Battery |
| 15 | 614249 | 3 | Tie-Cable |
| 17 | 321-50 | 1 | Screw-HH |
| 19 | 125-2468 | 1 | Housing-Switch, LH |
| 20 | 125-2469 | 1 | Housing-Switch, RH |
| 21 | 125-2470 | 1 | Button-Switch |
| 22 | 121-9173 | 1 | Switch-Push Button |
| 23 | 94-4496 | 3 | Screw-PPH |
Attachments and Accessories
This section lists available attachments and accessories for the Toro 20334 22in Recycler Lawn Mower:
- Traction Assist Handle Kit: Model/Part 108-8120
- Loose Parts Kit: Model/Part 117-4134
- Toro WPM Maint Kit: Model/Part 20234
- Replacement Bag: Model/Part 59310
- Replacement Frame and Bag Kit: Model/Part 59312
- 22 Inch Atomic Blade: Model/Part 59534P
For further assistance, contact Toro at www.Toro.com.
