工业注射泵_多通道切换阀_鲁尔接头_南京润泽流体控制设备有限公司
Instruction Manual for RUNZE FLUID models including: RZ1030B Peristaltic Pump, RZ1030B, Peristaltic Pump, Pump
Resources - Nanjing Runze Fluid Control Equipment Co., LTD.
File Info : application/pdf, 8 Pages, 625.30KB
DocumentDocumentV 1.0 Table of Content Chapter 1 Product Introduction.....................................................................................................3 1.1 Product Characteristics............................................................................................................................... 3 1.2 External and Mounting Dimensions (Unit: mm)...................................................................................... 3 1.2.1 Pump Head External and Mounting Dimension......................................................................... 3 1.2.2 Pump External and Mounting Dimension....................................................................................3 Chapter 2 Technical Parameters of Peristaltic Pump............................................................. 4 2.1 Flow Curve Chart......................................................................................................................................... 4 2.1.1 RZ1030B Maximum Reference Flow Curve for 0.8mm WT Pump Tube.............................. 4 2.1.2 RZ1030B Maximum Reference Flow Curve for 1.0 mm WT Pump Tube............................. 5 2.2 Motor Parameters........................................................................................................................................ 5 2.2.1 Motor Features.................................................................................................................................5 2.2.2 Motor Wiring..................................................................................................................................... 5 2.2.3 Motor Reliability............................................................................................................................... 6 2.2.4 Motor Dimension..............................................................................................................................6 Chapter 3 Hose Assembly.............................................................................................................. 7 Chapter 4 Technical Service.......................................................................................................... 8 www.runzeliuti.com 2 Chapter 1 Product Introduction 1.1 Product Characteristics PPS Housing, excellent structural performance, moderate 4 rotor pulse With flexible upper pressure block, self-adapting to different hoses, easy to change the tube Mainly used for medical devices and various small flow liquid transfer analysis instruments OEM support Outlet pressure at 0.2-0.3 MPa, Hydraulic head (pressured water approx. 20m) Suction range = atmospheric pressure (standard 10.33m) - cavitation margin of the pump - inlet tube loss - safety margin (0.5) - cavitation pressure of the medium 1.2 External and Mounting Dimensions (Unit: mm) 1.2.1 Pump Head External and Mounting Dimension 57 47 Mounting Hole 57 47 24.9 1.2.2 Pump External and Mounting Dimension www.runzeliuti.com 3 Chapter 2 Technical Parameters of Peristaltic Pump 2.1 Flow Curve Chart Model WT (mm) ID (mm) Max Flow Rate ml/min WT (mm) RZ1030B 0.8 0.64 0.76 0.89 1.02 1.14 1.30 1.42 1.52 1.65 1.85 2.06 2.29 2.54 2.79 12 15 18 25 32 38 47 50 56 70 87 94 113 128 1.0 ID (mm) 1.0 2.0 3..0 Max Flow Rate 24 74 183 ml/min 2.1.1 RZ1030B Maximum Reference Flow Curve for 0.8mm WT Pump Tube Flow Model RPM 1rpm 50rpm 100rpm 150rpm 200rpm 250rpm 300rpm 350rpm 400rpm Pharmed BPT0279-008 1 ml/min 18 ml/min 33 ml/min 46 ml/min 63 ml/min 79 ml/min 93 ml/min 109 ml/min 128 ml/min Figure 2-1-1 RZ1030B Flow-Speed Curve www.runzeliuti.com 4 2.1.2 RZ1030B Maximum Reference Flow Curve for 1.0 mm WT Pump Tube Flow Model RPM Pharmed BPT0279-008 1rpm 50rpm 100rpm 150rpm 200rpm 250rpm 300rpm 350rpm 400rpm 1 ml/min 23 ml/min 46 ml/min 70 ml/min 94 ml/min 119 ml/min 141 ml/min 165 ml/min 183 ml/min Figure 2-1-2 RZ1030B Flow-Speed Curve 2.2 Motor Parameters 2.2.1 Motor Features Description Rated Voltage Rated Current Maximum Output Power Motor Step Angle° Angle Error Input Impedance Operating Temperature Motor Weight 2.2.2 Motor Wiring Properties A+ AB+ B- Parameters 24V 1.1A 10.1W 1.8° 1.8°±0.09° 4.2±0.42 -10~+50 350g Wiring color RED YELLOW BLUE ORGANGE www.runzeliuti.com 5 2.2.3 Motor Reliability No. Test Project 1 Low temperature setting (cold resistance) 2 High temperature setting (heat resistance) High temperature and 3 high humidity setting (humidity resistance) 4 Hot and cold operation (temperature change) 5 Vibration 6 Dropping Test Conditions Temperature: -40±3 Test time: 96h Temperature: 85±2 Test time: 96h Temperature: 60±2 (40±2) Humidity: 93%+2/-3% Test time: 96h Temperature: low temperature test -40±31h (Temperature change time: within 5min) High temperature test: 85%±2 1h Cycle index: 25 times Range of vibration number: 10Hz~55Hz~10Hz Amplitude: 1.5mm] Vibrating direction: X.Y.Z Time: 2h in each direction 981 acceleration m/s² sine half wave Action time: 6ms Falling direction: ±X, ±Y, ±Z Number of falling rounds: 3 rounds each Reference Specification JIS C 60068-2-1 JIS C 60068-2-2 JIS C 60068-2-3 JIS C 60068-2-14 JIS C 60068-2-6 JIS C 60068-2-27 2.2.4 Motor Dimension www.runzeliuti.com 6 Chapter 3 Hose Assembly Tip: Hose can be greased with certain amount of grease to prolong its service life Step 1 Open the spring lock Step 2 Open the upper pressure block Step 3 Install the pump hose, and keep fittings on the two ends of the hose stuck to the pump head Step 4 Close upper pressure block Step 5 Installation complete www.runzeliuti.com 7 Chapter 4 Technical Service www.runzeliuti.com 8