Viotel | Enhance Structural Monitoring Today
User Guide for VIOTEK models including: viot00571 Accelerometer Node, viot00571, viot00571 Accelerometer, Accelerometer, Accelerometer Node, Node
Viotel Accelerometer Vibration Node
File Info : application/pdf, 2 Pages, 334.73KB
DocumentDocumentQuick Start Guide A CC E LE RO M E T E R NODE 1) MOUNT Mount the device firmly to your chosen location using a secure mounting method: Twosided adhesive, side mounting holes and/or pole mount bracket for threaded holes. 2) USING THE MAGNET Wherever instructed to tap the node using the magnet, do so at the spot indicated "X". Sequential taps must be performed within 3 seconds before the device count resets. 3) CONFIRM STATUS Tap Once - If the device is off, a solid blue light will appear from the status LED. Proceed to step 4. - If the device is on, a solid green light followed by a red light will appear from the status LED. Proceed to step 6. 4) TOGGLE DEVICE ON Tap Twice - This will turn the device on. Accelerometers use substantial power, please proceed to step 5 when device is not in use. 5) TOGGLE DEVICE OFF Tap Twice - This will turn the device off followed by a solid blue LED. 6) VIEW DATA Please head over to your nodes Dashboard to begin seeing the data. Please refer to the User Manual for more information and a full guide on this device. For queries, email support@viotel.co GREEN BLUE RED STATUS On Off Device is busy BLUE YELLOW RED COMMS Communicating with server Collecting GPS Coordinates Unable to Communicate OUR RESONANCE Resonance describes the phenomenon of increased amplitude that occurs when a an external force or a vibrating system is equal or close to a natural frequency of the system on which it acts. Leveraging decades of experience in earthquake analysis and monitoring of mining seismicity, Viotel have a deep understanding of resonance and have developed a unique series of asset management solutions involving monitoring and analysis of vibrations and waveforms. The Viotel Wireless Accelerometer Node is an ultra-low noise triaxial MEMS sensor and self-contained with a digital communication interface. It comes pre-programmed and ready to mount in the desired location and is suitable to measure the vibration modes in buildings. www.viotel.co sales@viotel.co