VigorACS 3 | DrayTek
User Manual for DrayTek models including: VigorACS 3 Network Management System, VigorACS 3, Network Management System, Management System
VigorACS 3 | DrayTek
File Info : application/pdf, 2 Pages, 16.87KB
DocumentDocumentRelease Note for VigorACS 3 Software Version: Release Type: Applied System: Open JDK Version: Mariadb Version: InfluxDB Version: 3.4.0 (Cluster) Normal Linux 17.0.6 10.6.5 1.8.3 VigorACS is a software that provides centralized device management for TR-069 based CPEs such as a broadband gateway, XDSL router, VoIP gateway, and wireless AP. VigorACS has device status, monitors the status of devices, or performs scheduling tasks such as firmware upgrade, configuration backup/restore, and parameter profile for mass deployment of CPE devices. New Features Add the notification for reminding new release of VigorACS. Supports OTA(Over-The-Air) updates. Support the storage limitation for Alarm, Logs, Device SysLog and File Manager. Support Model and Version For the full model support list, please refer to Compatible Devices section in URL : https://www.draytek.com/products/vigoracs-3/ Improvement Improved: Add the new option of WireGuard VPN. Improved: Support to manage new CPE (Vigor2763). Improved: Improvement on the Network management list. Improved: Improvement for the dashboard of the offline CPE. Improved: Add an option to enable/disable the SOAP interface. Improved: Restrict the access rights for PublicArea (File Manager). Improved: Display max nodes' total number in group management. Improved: Add an option to enable WAN alarms at a network level. Improved: Add limitation for the character number for Router Name. Improved: Add a new TR-069 parameter, Separate Account for ADSL. Improved: Add Global parameter to enable Periodic Inform Settings forcefully. Improved: The REST API WholesaleWizard can be created without expire date. Improved: Modify the option names for PhysicalType on the Parameter Tree page. Improved: Change the permission of MySQL DB backup and ACS relevant directory. Improved: Add or modify a user role to allow adding networks and changing device names. 1 Improved: Remove the .zip and .rst files after downloading firmware files from DrayTek FTP. Improved: Support mistake-proofing mechanism for Captive Portal Detection in Hotspot Profile. Improved: Add a new tab for VPN>>Remote Access Control with the name of Bind to WAN. Improved: Add new setting fields for MSS in Configuration>>VPN PPP General Setup and IPsec General Setup. Improved: Provide a simple report only containing the device name, the quantity of the device, and the firmware version. Corrected: An issue of lacking ax option in 5GHz for AP profile. Corrected: A display issue with updating the CPE device name (Vigor167). Corrected: An issue with Apply Access List to Ping button was not clickable. Corrected: An issue with displaying the system uptime for certain CPE (Vigor167). Corrected: An issue with saving the management settings without a reboot message. Corrected: An issue with device offline when there was interface lost connection alarm. Corrected: An issue with network name duplicate detection not working if Unicode characters used. Corrected: An issue of disconnection for Switch and AP after changing the connection mode from DHCP to Static IP. Corrected: An issue with domain verification for Let's Encrypt. Corrected: An issue with the alarm log not working by the global mail server. Corrected: An issue of DB backup completed with a "Delete Logs Failed" error message. Corrected: An issue with the Group administrator user role is missing the API access option. Corrected: An issue with changing the user account settings with the privilege of Standard user. Corrected: An issue with the Standard user should be able to view the license information page. Corrected: An issue with login failure after upgrading the VigorACS from 3.2.1 to the latest version. Corrected: An issue with WildFly service not working on the operation system which is Turkish. Known Issue None. NO: 111_08_23 2