Panduit | Network Infrastructure and Industrial Electrical Wiring
Installation Guide for PANDUIT models including: T-PMPI-311-PC, T-PMPI-311-PC Copper Compression Connectors, Copper Compression Connectors, Compression Connectors, Connectors
PAN A1/0-12R-C Pan-Lug™ A1/0-12R-C | Crawford Electric Supply
File Info : application/pdf, 2 Pages, 135.90KB
DocumentDocumentCOPPER COMPRESSION CONNECTORS © Panduit Corp. 2024 INSTALLATION INSTRUCTIONS T-PMPI-311-PC COPPER COMPRESSION CONNECTOR INSTALLATION 1. Use a connector marked for the wire size and wire material to be used. NEVER use a copper connector on aluminum wire. 2. Strip wire insulation to approximate length shown on tool chart. DO NOT nick or ring the conductor strands. 3. Clean the wire. 4. Insert stripped wire into connector until the wire stops. 5. Using installation tooling shown on other side, insert connector in die and crimp. Evenly space crimps on barrel of connector. Begin crimping near the tongue end of the lug and continue crimping toward the wire end. REQUIRED NUMBER OF COMPRESSIONS SHOWN ON TOOL CHART IN ( ). KC22 hex dies will emboss a die index number in the barrel of the lug for post crimp inspection. 12 12 3 NUMBER OF CRIMPS: 2 NUMBER OF CRIMPS: 3 PANDUIT PART A8-10R-C A8-14R-C A8-56R-C A8-38R-C A6-10R-C A6-14R-C A6-56R-C A6-38R-C A6-14RH-C A4-14R-C A4-56R-C A4-38R-C FLEX CABLE SIZE 8 AWG 6 AWG 4 AWG Tool Chart for Compression Connectors A-Series with Class K Copper Flex Cable WIRE STRIP 9/16 GREENLEE DIE NO. KC22-8 8 Red (2) Pico 500 Series Crimp Locator 514DA-8NIT B.140 10894 KC22-6 9/16 6 514DA-6NIT-B- 10893 Blue RA-P.150 (2) 19576 KC22-4 5/8 4 514DA-4NIT 10969 Gray B.170 (2) Pico 400 Series Crimp Locator 414DA-8NIT B.140 19352 414DA-6NIT B.150 19351 ---- 414DA-4NIT B.170 19353 KC22 DIES CAN BE USED IN THE FOLLOWING CRIMP TOOLS: GREENLEE #EK622L (6-TON), PANDUIT CT-3001/ST, CT-3001/STBT, CT-3001/CCPBT, & CT-3001/CCP (WITH UA22 ADAPTER) (6-TON), WEZAG UP 60 (WITH 1481-03017 ADAPTER), SCHLEUNIGER CT 60 (WITH 1481-03017 ADAPTER), NOT ALL ARE SUPPLIED BY PANDUIT. For Instructions in Local Languages and Technical Support: techsupport@panduit.com www.panduit.com Page 1 of 2 E-mail: cs@panduit.com Phone: 800-777-3300 Rev 08 © Panduit Corp. 2024 INSTALLATION INSTRUCTIONS Tool Chart for Compression Connectors A-Series with Class K Copper Flex Cable T-PMPI-311-PC PANDUIT PART NUMBER A2-14R-C A2-56R-C A2-38R-C A2-12R-C A2-14RH-C A2-38RH-C A2-56RH-C A2-56RF-C A2-38RF-C A1-14R-C A1-56R-C A1-38R-C A1-12R-C A1/0-56R-C A1/0-38R-C A1/0-12R-C A1/0-38RH-C A1/0-38RF-C A2/0-56RC-C A2/0-38R-C A2/0-12R-C A2/0-38RH-C A2/0-56RH-C A2/0-12RF-C A3/0-56R-C A3/0-38R-C A3/0-12R-C A4/0-56R-C A4/0-38R-C A4/0-12R-C A4/0-12RH-C A4/0-38RH-C A4/0-38RF-C A4/0-12RF-C FLEX WIRE STRIP GREENLEE DIE NO. CABLE SIZE LENGTH DIE INDEX NUMBER CLASS K (in) (QTY OF COMP) Pico 500 Series Model 500-D-1EC-P Crimp Locator Pico 400 Series Model 400-B-1EC Crimp Locator 2 AWG 5/8 1 AWG 13/16 1/0 AWG 13/16 2/0 AWG 15/16 3/0 AWG 13/16 4/0 AWG 15/16 KC22-2 2 Brown (2) KC22-1 1 Green (2) KC22-1/0 1/0 Pink (2) CD22-2/0 2/0 Black (2) CD22-3/0 3/0 Orange (2) KC22-4/0 4/0 Purple (2) 5510-8 514DA-2NIT-B-RAP.190 19575 19582 414DA-2NIT B.190 19354 ---- 514DA-1NIT B.240 5510-11 414DA-1/0NIT B.240 19350 514DA-1/0NIT-B-RAP.240 10216 19574 19581 10863 514DA-2/0NIT-B-RA- P.280 19573 NOT REQUIRED 414DA-1/0NIT B.240 ---- 414DA-2/0NIT B.280 ---- 19349 19348 514DA-3/0NIT B.325 5520-1 --- --- 514DA-4/0NIT-BP.350 10895 514DA-4/0NIT-BP.350 ---- NOT REQUIRED --- --- ---- KC22 DIES CAN BE USED IN THE FOLLOWING CRIMP TOOLS: GREENLEE #EK622L (6-TON), PANDUIT CT-3001/ST, CT-3001/STBT, CT-3001/CCPBT, & CT-3001/CCP (WITH UA22 ADAPTER) (6-TON), WEZAG UP 60 (WITH 1481-03017 ADAPTER), SCHLEUNIGER CT 60 (WITH 1481-03017 ADAPTER), NOT ALL ARE SUPPLIED BY PANDUIT. For Instructions in Local Languages and Technical Support: techsupport@panduit.com www.panduit.com Page 2 of 2 E-mail: cs@panduit.com Phone: 800-777-3300 Rev 08